Brother MFC 9760 User Manual

   Using the Brother MFC with a New Power Macintosh® G3, G4 or iMac™/iBook™   65
PRINTER/SCANNER
To print the document:
3From your Macintosh application software, click File menu and select Page Setup. You can 
change the settings for Paper Size, Orientation and Scaling, then click OK.
4From application software, click File menu and select Print. Click Print to start printing.
If you want to change Copies, Pages, Resolution, Paper Source and Media 
Type, select your settings before clicking Print.
Option...

66   Chapter 7
Using Brother TWAIN Scanner Driver with 
Your Apple
® Macintosh®
The Brother MFC Software Suite includes a TWAIN Scanner driver for Macintosh®. This 
Macintosh® TWAIN Scanner driver can be used with applications that support the TWAIN 
specification.
Accessing the Scanner
Run your Macintosh TWAIN-compliant application software. The first time you use the Brother 
Twain driver, set it as default by choosing the Select Source. Afterwards, for each document you 
scan choose Acquire Image or...

   Using the Brother MFC with a New Power Macintosh® G3, G4 or iMac™/iBook™   67
PRINTER/SCANNER
Settings in the Scanner Window
Image
Resolution
Choose the scanning resolution from the Resolution pop-up menu. Higher resolutions take more 
memory and transfer time, but can achieve a finer scanned image.
Colour Type
Black & White—Set the Colour Type to Black & White for text or line art. For photographic images, 
set the Colour Type to Grey (Error diffusion) or True Grey.
Grey (Error Diffusion)—is used for...

68   Chapter 7
Scanning Area
Set the Size to one of the following:
Letter (8.5 x 11 inches)
A4 (210 x 297 mm)
Legal (8.5 x 14 inches)
A5 (148 x 210 mm)
B5 (182 x 257 mm)
Executive (7.25 x 10.5 inches)
Business Card (90 x 60 mm)
Custom (User adjustable from 0.35 x 0.35 inches to 8.5 x 14 inches)
After you choose a custom size, you can adjust the scanning area. Click and hold the mouse button 
as you drag the mouse to crop the image.
Business Card Size
To scan business cards, select the Business...

   Using the Brother MFC with a New Power Macintosh® G3, G4 or iMac™/iBook™   69
PRINTER/SCANNER
Contrast
The contrast setting is adjustable only when you have selected one of the grey scale or colour 
settings, but it is not available when Black & White is selected as the Colour Type.
Increasing the contrast level (by dragging the slidebar to the right) emphasizes dark and light areas 
of the Image, while decreasing the contrast level (by dragging the slidebar to the left) reveals more 
detail in grey...

70   Chapter 8
8For DOS User
How to Use the machine with Your DOS Application Software
Before working with your application software that runs on DOS, check that the machine’s name 
appears in the printer selection of your application software. If the machine is not listed, you must 
install the printer driver that corresponds to HP LaserJet 5P’s emulations.
The following table shows the combination of printer driver and emulation mode. To get the most 
out of this machine, you should install an HP...

   For DOS User   71
PRINTER/SCANNER
5Type CD DOS and press Enter.
6Type RPCSETUP and press Enter.
7Follow the instructions from the installer.
Running the Remote Printer Console Main Program
Type C:\DOS>RPCX and press the Enter key to start the Remote Printer Console main program.
The Main Screen will appear on your computer screen.
Do not use this program from a DOS window running under Windows.X:\>CD DOS
X:\DOS>RPCSETUP
 

72   Chapter 9
9Troubleshooting and Maintenance
Error Messages
You may occasionally encounter a difficulty with the machine. If this happens, the machine often 
identifies the problem and displays an error message. The list below explains the most common error 
messages, in alphabetical order.
ERROR MESSAGE CAUSE ACTION
CHANGE DRUM SOONThe drum unit is near the end of its 
life.If you have a print quality 
problem, replace the drum unit 
with a new one.
The drum counter was not reset after 
a new drum...

   Troubleshooting and Maintenance   73
MAINTENANCE
OUT OF MEMORY
(When the machine is 
used as a printer.)The machine memory capacity has 
been exceeded.- Press Reset to delete data 
remaining in the memory of 
the machine.
- If you have installed the 
Windows
® driver, try again 
after setting the True Type 
mode to “Print as Graphics” in 
the PRINT menu of your 
application software.
- Reduce the print resolution or 
reduce the complexity of your 
document.
- Expand the printer memory 
with the...

74   Chapter 9
Document Jams and Paper Jams
Based upon where the original document or printed sheet is jammed, follow the appropriate set of 
instructions to remove it.
Document Jam in the Top of the ADF Unit
1Remove any paper from the document feeder that 
is not jammed. 
2Lift the ADF cover.
3Pull the jammed document out to the left.
4Close the ADF cover.
5Press Stop.
Document Jam inside the ADF Unit
1Remove any paper from the document feeder that is 
not jammed.
2Open the document cover.
3Lift the ADF...