Brother MFC 9760 User Manual

   Making Copies   15
COPIER
Temporary Copy Setting
You can improve your copies by using the Copy keys: Enlarge, Reduce, Options, 
Clear Settings, Special and Copy Mode. These settings are temporary, and the machine returns 
to its default settings 45 seconds after it finishes copying. If you want to use these temporary settings 
again, place the next document in the ADF or glass platen then press Copy keys before the 45 
seconds expire.
Copying Using Multiple Settings
You can try different combinations...

16   Chapter 2
Selecting Recomended Ratio
Making Enlarged Copies
1Insert the document face up in the ADF, or face down on the glass platen.
2Using the numeric keys, enter the number of copies you want (up to 99).
3Press Enlarge.
4Press   or   to choose an enlargement ratio.
You can enlarge to 141%, 150%, 200% or 400%.
—OR—
You can press   or 
 to select MANUAL, and then use the numeric keys to enter an 
enlargement ratio between 101% and 400%. For example, press 1, 5, 3 to enter 153%.
5Press Menu/Set....

   Making Copies   17
COPIER
Using the Options Key
The Options key changes the settings for contrast, stack/sort, paper type and paper size options for 
the next copy only. See the explanation below the table.
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1Insert the document face up in the ADF, or face down on the glass platen.
2Using the numeric keys, enter the number of copies you want (up to 99).
3Press Options and  or  to select CONTRAST and then press Menu/Set.
4Press...

18   Chapter 2
Paper Type
You can use the following types of paper for copying. For the best print quality, select the type of 
media that you are using.
1Press Options and  or  to select PAPER TYPE, and then press Menu/Set.
2Press  or  to select your type of paper, and then press Menu/Set.
3Press Copy.
Paper Size
You can identify the size of the paper in the paper tray. You can select LETTER, EXECUTIVE, 
A4, A5, A6 (for Upper Tray Only), B5 or B6 size paper.
1Press Options and   or   to select PAPER...

   Making Copies   19
COPIER
Copy Mode
You can select the Copy resolution for your type of the original document (Auto, Text or Photo). 
Select the right kind of image you’re copying.
1Insert the document face up in the ADF, or face down on the 
glass platen.
2Using the numeric keys, enter the number of copies you want 
(up to 99).
3Press Copy Mode repeatedly until the LED shows the setting 
you want.
Auto (line art, graphs, or any combination including photograph)
Text (text only)
Photo (photograph...

20   Chapter 2
2 in 1
4 in 1
Poster
You can create a poster size copy of a photograph. 
2in1 or 4in1 copy are not available with Enlarge or Reduce.
Poster size copy can be made only by using glass platen.
Poster is not available with Enlarge or Reduce.
Poster is not available for multiple copies.
2
112
4
3
2
134
12
 

   Making Copies   21
COPIER
Changing Default Settings
Press Menu/Set, 2 to change default settings for Copy mode. These settings will remain until you 
change them again by pressing Menu/Set. Adjust the Copy Mode and Contrast and Paper Type 
settings.
By pressing a number, you can adjust copy settings as shown in the following chart. Press   or   
to move through the selections for each setting. Press Menu/Set to save your selection. Press Stop
—OR—Press   to select the next setting you want to change....

22   Chapter 2
Copy Contrast
You can adjust copy contrast to make copies darker or lighter.
1Press Menu/Set, 2, 2.
2Press  to make a copy lighter—OR—Press  to make a copy darker, and then press 
Menu/Set.
3Press Stop—OR—Press  or  for additional settings.
Paper Type
You can use the following types of paper for copying. For the best print quality, select the type of 
media that you use most often.
1Press Menu/Set, 2, 3.
2Press   or   to select your type of paper, and then press Menu/Set.
3Press...

  Using the machine as a Printer   23
PRINTER/SCANNER
3Using the machine as a Printer
Special Printing Features
Windows® Printing
The dedicated printer driver for Microsoft® Windows® 95, 98, 98SE, Me, 2000 Professional and 
Windows NT® Workstation Version 4.0 are available on the CD-ROM supplied with the MFC. You 
can easily install them into your Windows® system using our installer program (see Quick Setup 
Guide). The driver supports our unique compression mode to enhance printing speed in Windows®...

24   Chapter 3
Two-Sided Printing (Manual Duplexing)
The supplied printer driver for Windows® 95, 98, 98SE, Me and for Windows NT® Workstation 
Version 4.0 enables manual duplex printing. (For more information, see the Help screen for the 
printer driver.)
The machine prints all the even-numbered pages on one side of the paper first. Then, the Windows
® 
driver instructs you (with a pop-up message) to reinsert the paper. Before reinserting the paper, 
straighten it well, or you may get a paper jam. Very...