Brother Mfc 7360 N Manual

Troubleshooting
101
B
The network scanning feature 
does not work.(Windows®)
It is necessary to set the third-party Security/Firewall Software to allow Network 
scanning. To add port 54925 for Network scanning, enter the information below: 
In Name: Enter any description, for example Brother NetScan.
In Port number: Enter 54925.
In Protocol: UDP is selected.
Please refer to the instruction manual that came with your third-party 
Security/Firewall Software or contact the software manufacturer.
For more...

102
Other
DifficultiesSuggestions
The machine will not turn on. Adverse conditions on the power connection (such as lightning or a power surge) 
may have triggered the machine’s internal safety mechanisms. Turn the machine 
off and unplug the power cord. Wait for ten minutes, then plug in the power cord 
and turn the machine on.
If the problem is not solved, turn off the machine. Plug the power cord into a 
different known working outlet and turn on the machine. 

Troubleshooting
103
B
Setting Dial Tone detectionB
When you send a fax automatically, by 
default your machine will wait for a fixed 
amount of time before it starts to dial the 
number. By changing the Dial Tone setting to 
Detection you can make your machine dial 
as soon as it detects a dial tone. This setting 
can save a small amount of time when 
sending a fax to many different numbers. If 
you change the setting and start having 
problems with dialling you should change 
back to the default No...

104
Improving the print qualityB
If you have a print quality problem, print a test page first (Menu, 4, 2, 3). If the printout looks good, 
the problem is probably not the machine. Check the interface cable connections or try printing a 
different document. If the printout or test page printed from the machine has a quality problem, 
check the following steps first. And then, if you still have a print quality problem, check the chart 
below and follow the recommendations.
Note
Brother does not recommend...

Troubleshooting
105
B
 
Grey backgroundMake sure that you use paper that meets our specifications. (See 
Acceptable paper and other print media on page 17.)
Check the machine’s environment. Conditions such as high 
temperatures and high humidity can increase the amount of 
background shading. (See the Safety and Legal booklet.)
Put in a new toner cartridge. (See Replacing the toner cartridge 
on page 56.)
Put in a new drum unit. (See Replacing the drum unit on page 61.)
 
GhostMake sure that you use...

106
 
All blackClean the corona wire inside the drum unit by sliding the green 
tab. Be sure to return the green tab to the home position (a). (See 
Cleaning the corona wire on page 67.)
The drum unit may be damaged. Put in a new drum unit. (See 
Replacing the drum unit on page 61.)
The fuser unit may be contaminated. Call your Brother dealer.
 
White lines across the pageMake sure that you use paper that meets our specifications. A 
rough surfaced paper or thick print media can cause problems.
Make...

Troubleshooting
107
B
 
White Spots on black text and 
graphics at 94 mm intervals
 
Black Spots at 94 mm intervalsMake ten copies of a blank, white sheet of paper. (See How to 
copy on page 47.) If the problem is not solved, the drum unit may 
have glue from a label stuck on the OPC drum surface. Clean the 
drum unit. (See Cleaning the drum unit on page 69.)
The drum unit may be damaged. Put in a new drum unit. (See 
Replacing the drum unit on page 61.)
 
Black toner marks across the 
pageIf you use...

108
 
Black lines down the page
Printed pages have toner stains 
down the page.Clean the corona wire inside the drum unit by sliding the green 
tab. (See Cleaning the corona wire on page 67.)
Make sure the green tab of the corona wire is at the home position 
(a).
The drum unit may be damaged. Put in a new drum unit. (See 
Replacing the drum unit on page 61.)
The toner cartridge may be damaged. Put in a new toner 
cartridge. (See Replacing the toner cartridge on page 56.)
The fuser unit may be...

Troubleshooting
109
B
 
Curled or wavyCheck the paper type and quality. High temperatures and high 
humidity will cause paper to curl. (See Acceptable paper and 
other print media on page 17.)
If you do not use the machine often, the paper may have been in 
the paper tray too long. Turn over the stack of paper in the paper 
tray. Also, fan the paper stack and then rotate the paper 180 in 
the paper tray.
Open the back cover (face-up output tray) for the machine to eject 
printed pages onto the...

110
 
Envelope creasesMake sure that the two green envelope levers inside the back 
cover are pulled down when you print the envelope.
 
Note
When you have finished printing, open the back cover and reset 
the two green levers back to their original position.
 
Examples of poor print qualityRecommendation