Brother Mfc 5890cn User Manual

Section VI
AppendixesVI
Safety and Legal130
Troubleshooting and Routine Maintenance145
Menu and Features178
Specifications207
Glossary222
 

130
A
Choosing a locationA
Put your machine on a flat, stable surface that is free of vibration and shocks, such as a desk. Put 
the machine near a telephone socket and a standard grounded electrical socket. Choose a 
location where the temperature remains between 10°C and 35 °C.
WARNING 
DO NOT put the machine near heaters, air conditioners, refrigerators, medical equipment, 
chemicals or water. 
  
DO NOT connect your machine to electrical sockets on the same circuit as large appliances or 
other...

Safety and Legal131
A
To use the machine safelyA
Please keep these instructions for later reference and read them before attempting any 
maintenance.
Note
If there are faxes in the machines memory, you need to print them or save them before you 
unplug the machine from the AC power outlet for more than 24 hours. (To print the faxes in 
memory, see Printing a fax from the memory  on page 54. To save the faxes in memory, see 
Transferring faxes to another fax machine  on page 159 or Transferring faxes to...

132
 
DO NOT put your hands on the edge of the machine under the document cover or the scanner 
cover. Doing this may cause injury.
 
 
DO NOT put your hands in front of the machine under the scanner cover. Doing this may cause 
injury.
 
 
 
DO NOT put your hands on the edge of the paper tray under the paper tray cover. Doing this 
may cause injury.
 
 
 
 
 

Safety and Legal133
A
 
DO NOT touch the area shaded in the illustration. Doing this may cause injury.
  
When moving the machine you must lift it from the base, by placing a hand at each side of the 
unit as shown in the illustration. DO NOT carry the machine by holding the scanner cover or the 
Jam Clear Cover.
  
DO NOT use flammable substances, any type of spray, liquid or aerosol cleaners to clean the 
inside or outside of the machine. Doing this may cause a fire or electrical shock.
 
 
 
 
   
 

134
 
If the machine becomes hot, releases smoke, or generates any strong smells, immediately 
unplug the machine from the electrical socket. Call your Brother dealer or Brother Customer 
Service.
  
If metal objects, water or other liquids get inside the machine, immediately unplug the machine 
from the electrical socket. Call your Brother dealer or Brother Customer Service.
 
 
Use caution when installing or modifying telephone lines. Never touch telephone wires or 
terminals that are not insulated...

Safety and Legal135
A
 
When using your telephone equipment, basic safety precautions should always be followed to 
reduce the risk of fire, electric shock and injury to people, including the following:
1 DO NOT use this product near water, for example, near a bath tub, wash bowl, kitchen sink or washing machine, in a wet basement or near a swimming pool.
2 Avoid using this product during an electrical storm. There may be a remote risk of electric  shock from lightning. 
3 DO NOT use this product to...

136
International ENERGY STAR® Compliance StatementA
The purpose of the International ENERGY STAR® Program is to promote the development and 
popularization of energy-efficient office equipment.
As an ENERGY STAR
® Partner, Brother Industries, Ltd. has determined that this product meets 
the ENERGY STAR
® guidelines for energy efficiency.
 
 

Safety and Legal137
A
Important Information for AustraliaA
Important safety instructionsA
1 Read all of these instructions.
2 Save them for later reference.
3 Follow all warnings and instructions marked on the product.
4 Unplug this product from the wall socket before cleaning the outside of the machine and the scanner glass. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning.
5 Do not use this product near water.
6 Do not place this product on an unstable cart, stand, or table. The...

138
16 Unplug this product from the electrical socket and refer servicing to Authorized Service Personnel under the following conditions:
„ When the power cord is damaged or frayed.
„ If liquid has been spilled into the product.
„ If the product has been exposed to rain or water.
„ If the product does not operate normally when the operating instructions are followed. 
Adjust only those controls that are covered by the operating instructions. Improper 
adjustment of other controls may result in damage...