Brother Mfc 5890cn User Manual

Printing photos from a memory card or USB Flash memory drive109
12
Printing Photos12
Before you can print an individual image, you 
have to know the image number.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (Photo Capture ). 
bPrint the Index. (See  Print Index 
(Thumbnails)  on page 108.)
cPress aor b to choose  Print Photos .
Press  OK.
dEnter the image number that you want to 
print from the thumbnails printed on the 
Index page.
Press  OK.
eRepeat...

Chapter 12
110
Enhance Skin-Tone12
Enhance Skin-Tone is best used for adjusting 
portrait photographs. It detects human skin 
colour in your photos and adjusts the image.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( Photo Capture ). 
bPress aor b to choose 
Enhance Photos .
Press  OK.
cPress  dor c to choose your photo.
Press  OK.
dPress  aor b to choose 
Enhance Skin-Tone .
Press  OK.
eDo one of the following:
„ Press  OK if you do not want to 
change...

Printing photos from a memory card or USB Flash memory drive111
12
Remove Red-Eye12
The machine detects eyes in your photos and 
will attempt to remove red-eye from your photo.
Note
There are some cases when red-eye may 
not be removed.•
When the face is too small in the image.
• When the face is turning too far up,  down, left or right.
 
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( Photo Capture ). 
bPress aor b to choose 
Enhance Photos .
Press  OK....

Chapter 12
112
Search by Date12
You can find your photos based on date.
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( Photo Capture ). 
bPress aor b to choose 
Search by Date .
Press  OK.
cPress  aor b to choose the date that you 
want to search from.
Press  OK.
dPress  dor c to choose your photo.
Note
You can view photos with other dates by 
pressing  dor c continuously. Press  d to 
view an older photo and  c to view a more 
recent photo.
 
ePress  aor...

Printing photos from a memory card or USB Flash memory drive113
12
Trimming12
You can trim your photo and print a part of the 
image. 
Note
If your photo is very small or of irregular 
proportions you may not be able to trim 
the photo. The LCD will display 
Image Too Small. or 
Image Too Long .
 
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (Photo Capture ).
bPress aor b to choose  Trimming.
Press  OK.
cPress  dor c to choose your photo.
Press  OK....

Chapter 12
114
PhotoCapture Center™ print settings12
You can change the print settings temporarily.
The machine returns to its default settings after 3 minutes, or if the Mode Timer returns the 
machine to Fax mode. (See  Mode Timer on page 26.)
Note
You can save the print settings you use most often by setting them as the default. (See  Setting 
your changes as a new default  on page 118.)
 
 
1 No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that...

Printing photos from a memory card or USB Flash memory drive115
12
Print Speed and Quality12
aPress aor b to choose 
Print Quality .
bPress dor c to choose  Normal or 
Photo .
Press  OK.
cIf you do not want to change additional 
settings, press  Colour Start to print. 
Paper options12
Paper Type12
aPress aor b to choose  Paper Type .
bPress dor c to choose the paper type 
you are using,  Plain Paper , 
Inkjet Paper , Brother BP71  or 
Other Glossy .
Press  OK.
cIf you do not want to change additional...

Chapter 12
116
Adjusting Brightness, 
Contrast and Colour12
Brightness12
aPress  aor b to choose  Brightness .
bPress dor c to make a darker or lighter 
print.
Press  OK.
cIf you do not want to change additional 
settings, press  Colour Start to print. 
Contrast12
You can choose the contrast setting. More 
contrast will make an image look sharper and 
more vivid.
aPress aor b to choose  Contrast.
bPress dor c to change the contrast.
Press  OK.
cIf you do not want to change additional 
settings, press...

Printing photos from a memory card or USB Flash memory drive117
12
Cropping12
If your photo is too long or wide to fit the 
available space on your chosen layout, part 
of the image will automatically be cropped.
The factory setting is On. If you want to print 
the whole image, turn this setting to  Off. If 
you are also using the Borderless setting, 
turn Borderless to  Off. (See  Borderless 
printing  on page 117.)
aPress aor b to choose  Cropping.
bPress dor c to choose  Off (or On).
Press  OK.
cIf...

Chapter 12
118
Setting your changes as a 
new default12
You can save the print settings you use most 
often by setting them as the default settings. 
These settings will stay until you change 
them again.
aPress  aor b to choose your new setting.
Press  OK.
Repeat this step for each setting you 
want to change.
bAfter changing the last setting, press 
a or b to choose  Set New Default .
Press  OK.
cPress  1 to choose  Yes.
dPress  Stop/Exit .
Restoring all settings to the 
factory settings12
You can...