Brother Laserprinter Hl 1435 User Guide

							1 - 28   ABOUT THIS PRINTER
4Remove the printed even-numbered pages from the output tray and put them back in the paper tray, 
placing the paper with the side to be printed on (blank side) face down. Follow the instructions on 
the computer screen.
Figure 1-35
5The printer will now automatically print all the odd-numbered pages on the other side of the paper. 
						

							ABOUT THIS PRINTER   1 - 29
Manual Duplex printing from the manual feed slot 
■Before you put the sheets back in the manual feed slot, you will have to straighten them, or you 
may get paper jams.
■You should not use very thin or very thick paper.
■When you use the manual duplex function, it is possible that there may be paper jams or poor 
print quality. If there is a paper jam, see Paper jams and how to clear them on page 6-5.
1Choose the Duplex printing mode from the Advanced tab in the printer driver.
Figure 1-36
2Select the Paper Size, Media Type, Paper Source, and other settings in the printer driver.
3Using both hands put the paper in the manual feed slot with the side to be printed on first facing up. 
Follow the instructions on the computer screen. Repeat this step until you have printed all the 
even-numbered pages.
Figure 1-37 
						

							1 - 30   ABOUT THIS PRINTER
4Remove the printed even-numbered pages from the output tray and put them in the same order 
back into the manual feed slot. Place the paper with the side that is going to be printed on (the blank 
side) face up. Follow the instructions on the computer screen.
Figure 1-38
5Repeat Step 3 until you have printed all the odd-numbered pages on the other side of the paper. 
						

							ABOUT THIS PRINTER   1 - 31
Guidelines for printing on both sides of the paper
■If the paper is thin, it may wrinkle.
■If paper is curled, straighten it and then put it back in the paper tray.
■You should use regular paper. Do not use bond paper.
■When you put paper in the paper tray, first empty the tray then put the printed page in it, with the 
printed side face up. (Do not add the printed pages to the top of the stack of unprinted paper.)
■If the paper is not feeding properly, it may be curled. Remove the paper and straighten it.
Paper orientation for printing on both sides of the paper
The printer prints the second page first.
If you print 10 pages on 5 sheets of paper, it will print page 2 then page 1 on the first sheet of paper.
It will print page 4 then page 3 on the second sheet of paper.
It will print page 6 then page 5 on the third sheet of paper, and so on.
When doing manual duplex printing, the paper must be put in the paper tray in the following way:
■For the upper paper tray (tray1):
Put the side to be printed on first, face down, with the leading edge (top) of the paper at the front of 
the tray.
To print the second side, put the paper face up, with the leading edge (top) of the paper at the front 
of the tray.
If letter head paper is used, this would be put in the paper tray with the heading face up, and at the 
front of the tray.
To print the second page, put the heading face down and at the front of the tray.
■For the manual feed slot
Put the side to be printed on first, in face-up, with the leading edge (top) of the paper in first.
To print the second side, put the paper face down, with the leading edge (top) of the paper in first.
If letterhead paper is used, this would be put in with the heading face down, and in first.
To print the second side, put the heading face up and in first. 
						

							2 - 1   DRIVER AND SOFTWARE
2
Printer driver 
A printer driver is software that translates data from the format used by a computer to the format that a 
particular printer needs. Typically, this format is a printer command language or page description 
language.
The printer drivers for the following operating systems are on the CD-ROM that we have supplied. You 
can also download the latest printer driver from the Brother Solutions Center at 
http://solutions.brother.com
You can see the operations and detailed information in the Install Software section of the supplied 
CD-ROM. 
For Windows® 95/98/Me, Windows NT® 4.0 and Windows® 2000/XP
■Brother GDI Printer driver for Windows®
For Mac® OS 8.6 to 9.2 and Mac® OS X 10.1 to 10.2
■Brother Laser driver for Macintosh®
Driver and software 
						

							DRIVER AND SOFTWARE   2 - 2
For Windows® 
Features in the Brother printer driver
You can also change settings by clicking the illustration on the left side of the Basic tab in the Properties 
dialog box.
Basic tab 
1Select the Paper Size, Multiple Page, Orientation and so on.
2Select the Paper Source and so on.
The screens in this section are from Windows® XP. The screens on your PC will vary depending on 
your Operating System.
If you are using Windows NT® 4.0, Windows® 2000 or XP, you can access the Basic tab by clicking 
Printing Preferences... in the General tab of the Brother HL-1435 series Properties screen.
1
2 
						

							2 - 3   DRIVER AND SOFTWARE
Advanced tab 
Change the tab settings by clicking the following icons:
1Print Quality
2Duplex
3Watermark 
4Page Setting
5Device Options
If you are using Windows NT® 4.0, Windows® 2000 or XP, you can access the Advanced tab by 
clicking Printing Preferences... in the General tab of the Brother HL-1435 series Properties 
screen.
12 3 45 
						

							DRIVER AND SOFTWARE   2 - 4
1Print Quality
Select the resolution, toner save and pr int settings or gray printing setting.
Resolution
You can change the resolution as follows: ■   1200 dpi  x
  600 dpi

■  600 dpi
■  300 dpi
Toner Save Mode
You can save running costs by turning on the toner save mode, which reduces the print density. 
Print Setting (For Windows
® 95/98/Me users only)
You can manually change the brightness, contrast and other settings.
2Duplex  
If you select the  Duplex button, the dialog box for the manual  duplex settings appears. Six types of 
manual duplex binding directions ar e available for each orientation. 
3Watermark 
You can place a watermarked logo or text into your documents.
When you use a bitmap file as  a watermark, you c an change the size of the watermark and place it 
anywhere you like on the page.
When  you use text as  a watermark, you can change the font,  darkness and angle  settings.
4Page Setting
You can change the print image scaling and select  Mirror / Reverse print  options. 
						

							2 - 5   DRIVER AND SOFTWARE
5Device Options
You can set the following Printer Function modes in this tab:
(You can jump to the page for each Printer Function by clicking the function name in the list below.)
■Job Spooling
■Quick Print Setup
■Sleep Time
■Status Monitor
■Page Protection
■Print Date & Time 
						

							DRIVER AND SOFTWARE   2 - 6
Job Spooling
The printer saves data that you want reprinted.
You can reprint a document without sending the data again from your PC. To reprint press and hold down 
the Control Panel button until all four LED’s are lit and then release the Control Panel button.
Quick Print Setup
You can turn the Quick Print Setup function ON or OFF. A small selection window appears on your 
computer. This will then let you make changes to the settings of the following functions:
■Multiple Page
■Manual Duplex
■Toner Save Mode
■Paper Source
■Media Type
Sleep Time
When the printer does not receive data for a certain period of time (timeout), it enters sleep mode. Sleep 
mode acts as though the printer was turned off. The default timeout is 5 minutes. When Intelligent Sleep 
Mode is selected, it is automatically adjusted to the most suitable time-out setting depending on the 
frequency of your printer use. While the printer is in sleep mode, all the LEDs are off, but the printer can 
still receive data from the computer. Receiving a print file or document automatically wakes up the printer 
to start printing. Pressing one of the buttons will also wake up the printer. 
Sleep mode can be turned off. To turn sleep mode off, go to the Advanced tab, select Device Options 
and then select Sleep Time. Double click the word Sleep Time in the Sleep Time screen, this will allow 
the Sleep Time Off function to appear, click Sleep Time Off to stop the printer going into sleep mode. 
The Sleep Time Off function can be hidden by double clicking the word Sleep Time in the Sleep Time 
screen again. We recommend that you keep Sleep mode on for power saving.
Status Monitor 
This reports the printer status (any errors that may happen with the printer) when printing. The default 
setting for the Status Monitor is off. If you would like to turn the status monitor on, go the Advanced tab, 
select Device options and then select Status monitor.
Page Protection
‘Page Protection’ refers to a setting that reserves additional memory for the creation of full page images.
Selections are AUTO, OFF, LTR (Letter-size paper), A4 or LGL (legal-size-paper).
The page protection feature allows the printer to create the full page image to be printed in memory 
before physically moving the paper through the printer. When the image is very complicated and the 
printer has to wait to process the image before printing, use this function.
Print Date & Time
Date: Specifies the format of the date.
Time: Specifies the format of the time.
If you want to prevent other people from printing your data using the Reprint function, clear the Use 
Reprint check box in the job spooling settings.