Brother Hl 5380dn User Manual

Driver and Software
61
3
Print Settings3
You can change settings by choosing a setting in the Print Settings list:
Basic tab
„Media Type
You can change the media type to one of the following:
„Plain Paper
„Thin Paper
„Thick Paper
„Thicker Paper
„Bond Paper
„Transparencies
„Envelopes
„Env. Thick
„Env. Thin
„Recycled Paper
„Resolution
You can choose the resolution as follows: 
„300 dpi
„600 dpi
„HQ 1200
„1200 dpi
 

Driver and Software
62
3
„Toner Save Mode
You can conserve toner use with this feature. When you set Toner Save Mode to On, print appears lighter. 
The default setting is Off.
Note • We do not recommend Toner Save for printing Photo or Greyscale images.
•Toner Save Mode is not available for 1200 dpi or HQ 1200 resolution.
 
„Reverse Print (For Mac OS X 10.3 and 10.4)
Check Reverse Print to reverse the data from up to down.
 

Driver and Software
63
3
Advanced tab
„Graphics Quality
You can change the print quality as follows:
„Photo
This is a photograph mode (gradation priority). Choose this setting for printing photographs that have 
continuous gradation. You can represent soft contrasts between various shades of grey.
„Graphics
This is a graphics mode (contrast priority). Choose this setting for printing text and figures, such as 
business and presentation documents. You can represent sharp contrasts between shaded areas....

Driver and Software
64
3
„Sleep Time
When the printer does not receive data for a certain period of time, it enters sleep mode. In sleep mode, 
the printer acts as though it were turned off. The default setting for timeout is 1 minute. If you want to 
change the sleep time, choose Manual and then enter the time in the text box on the driver. 
While the printer is in sleep mode, Back light is off, the LCD shows SLEEP, but the printer can still receive 
data. Receiving a print file or document or pressing...

Driver and Software
65
3
Duplex Printing3
„Use duplex unit.
Select Layout.
Choose Long-edge binding or Short-edge binding in Two-Sided.
„Manual duplex
Select Paper Handling.
„For Mac OS X 10.3 and 10.4
Choose Odd numbered pages and print. Turn the paper over and reload it in the tray, and then choose 
Even numbered pages and print.
 

Driver and Software
66
3
„For Mac OS X 10.5
Choose Odd Only and print. Turn the paper over and reload it in the tray, and then choose Even Only 
and print.
Status Monitor3
This reports the printer status (any errors that may happen with the printer) when printing. If you would like to 
turn the status monitor on, follow these steps:
„For Mac OS X 10.3 and 10.4
aRun the Printer Setup Utility (from the Go menu, choose Applications, Utilities), then choose the 
printer. 
bClick the Utility, then Status...

Driver and Software
67
3
Using the BR-Script3 printer driver 
(Post Script
® 3™ language emulation for Macintosh)3
Note • To use the BR-Script3 printer driver on a Network, see the Network User’s Guide on the CD-ROM. 
• To use the BR-Script3 printer driver, you need to set the EMULATION to BR-SCRIPT3 using the control 
panel or Web Based Management (web browser) before connecting the interface cable. (See Menu table 
on page 89.)
 
Installing the BR-Script3 printer driver3
You need to install the...

Driver and Software
68
3
bOpen the Utilities folder.
cDouble-click the Printer Setup Utility icon. 
dClick Add.
For Mac OS X 10.3 users, go to e. 
For Mac OS X 10.4 or greater users, go to f. 
 

Driver and Software
69
3
eChoose USB.
fChoose the model name and make sure that Brother is in Printer Model (Print Using), then select the 
model name that shows BR-Script in the Model Name (Model), and then click Add.
For Mac OS X 10.3 users:
 

Driver and Software
70
3
For Mac OS X 10.4 or greater users:
gFrom the Printer Setup Utility menu, choose Quit Printer Setup Utility.