Brother Hl 5350dnlt User Manual

Driver and Software
71
3
eDrag the  folder (from the Macintosh HD (Startup Disk), choose Library, Printers, Brother) into the 
Trash and then empty the Trash.
fRestart the Macintosh.
 

Driver and Software
72
3
Software3
Software for networks (For HL-5350DN and HL-5370DW)3
BRAdmin Light3
BRAdmin Light is a utility for initial setup of Brother network connected devices. This utility can search for 
Brother products on your network, view the status and configure basic network settings, such as IP address. 
The BRAdmin Light utility is available for Windows
® 2000/XP, Windows Vista® and Windows Server® 
2003/2008 and Mac OS X 10.3.9 (or greater) computers. For installing BRAdmin Light on...

Driver and Software
73
3
BRPrint Auditor (for Windows®)3
The BRPrint Auditor software brings the monitoring power of Brother network management tools to locally 
connected machines. This utility allows a client computer to collect usage and status information from a 
machine connected via the parallel or USB interface. The BRPrint Auditor can then pass this information to 
another computer on the network running BRAdmin Professional 3 or Web BRAdmin 1.45 or greater. This 
allows the administrator to...

Driver and Software
74
3
„Adobe Systems Incorporated. PostScript® Language Reference, 3rd edition. Addison-Wesley 
Professional, 1999. ISBN: 0-201-37922-8
„Adobe Systems Incorporated. PostScript
® Language Program Design. Addison-Wesley Professional, 
1988. ISBN: 0-201-14396-8
„Adobe Systems Incorporated. PostScript
® Language Tutorial and Cookbook. Addison-Wesley 
Professional, 1985. ISBN: 0-201-10179-3
„EPSON FX-850 and IBM
® ProPrinter XL Mode
The EPSON FX-850 and IBM ProPrinter XL modes are the...

Driver and Software
75
3
Remote Printer Console3
Remote Printer Console is software to change many of the printer settings independently of your application. 
For example, you can change the settings for printer margin, sleep mode, character set and so on. These 
settings are then remembered and used by the printer.
How to use and install the Remote Printer Console software
3
To use the Remote Printer Console software, follow the steps below.
For Windows
®3
aPut the CD-ROM into your CD-ROM drive and...

76
4
4
Control Panel4
LEDs (Light Emitting Diodes)4
This section refers to five LEDs Back Cover, Toner, Drum, Paper, Status and two buttons Job Cancel and 
Go on the control panel.
The LED indications shown in the table below are used in the illustrations in this chapter.
Control Panel4
1)Back Cover LED
The Back Cover LED indicates when errors 
occur in the back of the printer. 
2)Toner LED
The Toner LED indicates when the Toner is 
low or at the end of its life.
3)Drum LED
The Drum LED indicates when...

Control Panel
77
4
LEDPrinter status
Sleep mode
The printer is in sleep mode. Pressing Go wakes up the printer from sleep mode to 
ready mode.
Ready to print
The printer is ready to print.
Warming up
The printer is warming up.
The Status LED will turn on for 1 second and off for 1 second. 
 

Control Panel
78
4
Receiving data
The printer is either receiving data from the computer, processing data in memory 
or printing the data.
The Status LED will turn on for 0.5 seconds and off for 0.5 seconds. 
Cooling down
The printer is cooling down. Wait for a few seconds until inside of the printer has 
cooled down.
The Status LED will turn on for 1 second and off for 1 second.
Data remaining in memory
There is remaining print data in the printer memory. If the yellow Status LED is on 
for a long time...

Control Panel
79
4
Drum life will end soon
The drum unit is near the end of its life. We recommend that you get a new drum 
unit to replace the current one. See Replacing the drum unit on page 102.
The Drum LED will turn on for 2 seconds and off for 3 seconds.
Replace drum
Replace the drum with a new one. See Replacing the drum unit on page 102.
No paper
Put paper in the tray. Then press Go. See Printing on plain paper, bond paper and 
transparencies on page 11, Printing on thick paper, labels and...

Control Panel
80
4
No tray
The paper tray was not detected, install it, or ensure it is inserted correctly.
Paper jam
Clear the paper jam. See Paper jams and how to clear them on page 120. If the 
printer does not start printing, press Go.
The Paper LED will turn on for 0.5 seconds and off for 0.5 seconds.
Incorrect paper size for auto DX
Press Go or Job Cancel. Set the correct paper that you want to use, or load the 
same size paper that you selected in the current driver setting. The paper size you...