Brother Hl 5350dn User Manual
Here you can view all the pages of manual Brother Hl 5350dn User Manual. The Brother manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 161
Appendix 151 A This parameter shows whether the printer prints the human readable line below the bar code. Human readable characters are always printed with OCR-B font of 10 pitch and all the current character style enhancements are masked. The default setting is determined by the bar code mode selected by ‘t’ or ‘T’. Quiet zone0 n = ‘onnn’ or ‘Onnn’ (nnn = 0 ~ 32767) Quiet zone is the space on both sides of the bar codes. Its width can be shown using the units that are set by the ‘u’ or ‘U’...
Page 162
Appendix 152 A This parameter shows the height of bar codes or expanded characters as shown above. It can start with ‘h’, ‘H’, ‘d’, or ‘D’. The height of bar codes is shown in the ‘u’- or ‘U’-specified unit. The default setting of the bar code height (12 mm, 18 mm or 22 mm) is determined by the bar code mode selected by ‘t’ or ‘T’. Expanded character width, line block drawing and box drawing0 n = ‘wnnn’ or ‘Wnnn’ Expanded character i 1.2 mm Line block drawing and box drawing i 1 dot This parameter...
Page 163
Appendix 153 A „When EAN 8, EAN 13, or UPC A is selected with the parameter ‘t5’ or ‘T5’ Ten numbers ‘0’ to ‘9’ can be accepted as bar code data. The number of characters for bar codes is limited as follows: EAN 8: Total 8 digits (7 digits + 1 check digit) EAN 13: Total 13 digits (12 digits + 1 check digit) UPC A: Total 12 digits (11 digits + 1 check digit) A number of characters other than those stated above will cause a data error that results in the bar code data being printed as normal print data....
Page 164
Appendix 154 A Box drawing0 ESC i ... E (or e) ‘E’ or ‘e’ is a terminator. Line block drawing0 ESC i ... V (or v) ‘V’ or ‘v’ is a terminator. Expanded character data start0 n = ‘l’ or ‘L’ Data that follows ‘l’ or ‘L’ is read as expanded character data (or labeling data). Expanded character data must end with the ‘ ’ code (5CH), which also ends this command.
Page 165
Appendix 155 A Table of Code (EAN) 128 set C0 Code(EAN) 128 set C describes an original command. The correspondence table is as follows. No. Code 128 Set C Input command Hex No. Code 128 Set C Input command Hex 0 00 NUL 0x00 52 52 4 0x34 1 01 SOH 0x01 53 53 5 0x35 202 ST X0x02 54 54 6 0x36 303 ET X0x03 55 55 7 0x37 404 EO T0x04 56 56 8 0x38 5 05 ENQ 0x05 57 57 9 0x39 606 ACK 0x06 58 58 : 0x3a 7 07 BEL 0x07 59 59 ; 0x3b 8 08 BS 0x08 60 60 < 0x3c 909 H T0x09 61 61 = 0x3d 10 10 LF 0x0a 62 62 > 0x3e 11 11 V...
Page 166
Appendix 156 A Example Program Listings0 WIDTH LPT1:,255 CODE 39 LPRINT CHR$(27);it0r1s0o0x00y00bCODE39?\; Interleaved 2 of 5 LPRINT CHR$(27);it1r1s0o0x00y20b123456?\; FIM LPRINT CHR$(27);it3r1o0x00y40bA\; Post Net LPRINT CHR$(27);it4r1o0x00y60b1234567890?\; EAN-8 LPRINT CHR$(27);it5r1o0x00y70b1234567?\; UPC-A LPRINT CHR$(27);it5r1o0x50y70b12345678901?\; EAN-13 LPRINT CHR$(27);it5r1o0x100y70b123456789012?\; UPC-E LPRINT CHR$(27);it6r1o0x150y70b0123456?\; Codabar LPRINT...
Page 167
157 B B Appendix (for Europe and Other Countries)B Brother numbers0 IMPORTANT For technical and operational help, you must call the country where you bought the printer. Calls must be made from within that country. Register your product0 By registering your Brother product, you will be recorded as the original owner of the product. Your registration with Brother: „may serve as a confirmation of the purchase date of your product should you lose your receipt; „may support an insurance claim by you in...
Page 168
158 C C Appendix (for USA and Canada)C Brother numbers0 IMPORTANT For technical and operational help, you must call the country where you bought the printer. Calls must be made from within that country. Register your product0 By registering your product with Brother International Corporation, you will be recorded as the original owner of the product. Your registration with Brother: „may serve as a confirmation of the purchase date of your product should you lose your receipt; „may support an...
Page 169
Appendix (for USA and Canada) 159 C Service center locator (USA only)0 For the location of a Brother authorized service center, call 1-877-BROTHER (1-877-276-8437). Service center locations (Canada only) 0 For the location of a Brother authorized service center, call 1-877-BROTHER. Ordering supplies 0 For best quality results use only genuine Brother supplies, which are available at most Brother retailers. If you cannot find the supplies you need and you have a Visa, MasterCard, Discover, or American...
Page 170
Index 160 D D A Accessories tab ......................................................... 44 Automatic duplex printing .......................................... 29 Automatic Emulation Selection ................................. 73 Automatic Interface Selection ................................... 73 B Bar code control ...................................................... 149 Booklet printing ......................................................... 31 BRAdmin Light...