Brother Hl 4070cdw User Manual

Control  Panel
82
4
Print Position X Offset -500/-499.../0*.../499/
500DotsMoves the print start position (at the 
top-left corner of pages) horizontally 
up to -500 (left) to +500 (right) dots in 
300 dpi.
Y Offset -50/-49.../0*.../499/
500DotsMoves the print start position (at the 
top-left corner of pages) vertically up 
to -50 (up) to +500 (down) dots in 
300 dpi.
Auto FFOff*/OnAllows you to print the remaining 
data without pressing Go.
HP LaserJet Font No. I000.../I059*.../I071
Font Pitch...

Control  Panel
83
4
1On conne ctio n to the  ne two rk, if the  machine s BOOT Metho d is Auto  the  ma chine  will a tte mpt to a utomatically  set the  IP address and Subnet 
Ma sk from a  bo o t serv e r such a s DHCP or BOOTP. If a  boo t serve r canno t be found, an APIPA IP address will be allocated, such as 169. 254. 
[001-254]. [000-255]. If the BOOT Method of the machine is set to Static you will need to manually enter an IP address from the machine s co ntrol 
panel.
BR-Script
(HL-4050CDN/...

Control  Panel
84
4
LAN for HL-4070CDW users
Submenu 1Submenu 2Menu SelectionsOptionsDescriptions
Wired TCP/IP BOOT MethodAuto*/Static/RARP/BOOTP
/DHCPChoose the IP method that best 
suits your needs.
IP Address ###.###.###.###
(000.000.000.000)*
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000)*
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000)*Enter the Gateway address.
IP Boot Tries # (3*)
APIPAOn*/OffAutomatically allocates the IP 
address from the link-local...

Control  Panel
85
4
1On conne ctio n to the  netwo rk, if the  machine s IP METHOD is AUTO the ma chine will a tte mpt to automa tica lly  set the IP a ddress and Subnet 
Ma sk from a  bo o t serv e r such a s DHCP or BOOTP. If a  boo t serve r canno t be found an APIPA IP address will be allocated, such as 
169.254.[001-254].[000-255]. If the IP METHOD of the ma chine is set to STATIC y ou will ne ed to  manua lly enter an IP address from the  
m a ch in e  s co nt ro l  pa ne l.
WLAN  
StatusStatus...

Control  Panel
86
4
Manual Regist. Print ChartPrints the chart to manually check 
the registration of the colors.
Set Registration 1 Magenta Left
2 Cyan Left
3 Yellow Left
4 Magenta Center
5 Cyan Center
6 Yellow Center
7 Magenta Right
8 Cyan Right
9 Yellow RightEnter the correction value on the 
chart you printed from the Print 
Chart.
Direct Print
SubmenuMenu SelectionsOptionsDescriptions
Paper SizeLetter*/Legal/A4/ 
Executive/JIS B5/B5/A5/
B6/A6/A4Long/FolioSets the size of paper for direct print....

Control  Panel
87
4
PictBridge
SubmenuMenu SelectionsOptionsDescriptions
Paper SizeLetter*/A4/B5/A5/B6/A6Sets the size of paper for PictBridge.
Orientation
Portrait*/Landscape

Portrait/Landscape*This printer can print pages in portrait 
or landscape orientation for 
PictBridge.
Date&TimeOff*/OnPrints the date and time.
File NameOff*/OnPrints the file name.
Print QualityNormal*/Fine
 The default settings are shown in Bold with an asterisk.
 

Control  Panel
88
4
Example of changing a menu setting4
Setting IP address
aPress the + or - button to choose LAN (and to display each setting shown below). 
Select ab or OK
Machine Info.
h
 
Select ab or OK
LAN
bPress OK. 
LAN
TCP / IP
cPress OK. 
TCP / IP
BOOT Method
dPress the - button. 
TCP / IP
IP Address
ePress OK.
The last digit in the first part of the number is blinking.
 
IP Address
192.0.0.192
fPress the + or - button to increase or decrease the number.
Press OK to go to the next number. 
 
IP...

Control  Panel
89
4
Default settings4
The printer settings have been set at the factory before shipment. They are called default settings (see Menu 
tableon page 78). Although you can run the printer with these default settings unchanged, you can tailor the 
printer with user settings.
Note
Changing the user settings does not affect the default settings. You cannot modify the preset default 
settings.
 
The changed user settings can be restored to the default settings with the Reset Menu. See Menu...

Control  Panel
90
4
Calibration4
The output density for each color may vary depending on the environment the machine is in such as 
temperature and humidity. Calibration helps you to improve the color density.
aPress the + or - key to choose Color Correction. Press OK. 
Select ab or OK
Machine Info.
h
 
Select ab or OK
Color Correction
bPress OK. 
Color Correction
ColorCalibration
cPress OK. 
ColorCalibration
Calibrate
dPress OK again. 
Calibrate
OK?
You can reset the calibration parameters back to those...

Control  Panel
91
4
Auto Registration4
Registration4
You can adjust the print position of each color automatically.
aPress the + or - key to choose Color Correction. Press OK. 
Select ab or OK
Machine Info.
h
 
Select ab or OK
Color Correction
bPress the + or - key to choose Auto Regist.. Press OK. 
Color Correction
Auto Regist.
cPress OK. 
Auto Regist.
Registration
dPress OK again. 
Registration
OK?
Frequency4
You can set how often the auto registration occurs.
aPress the + or - key to choose Color...