Brother Hl 3040cn User Manual

Appendix
171
A
Print surfaceA
The characteristics of the face side and reverse side of a sheet of paper may vary a little.
Usually, the opening side of the paper ream package is the print side. Follow the indications on the paper 
package. Typically, the print side is indicated by an arrow.
Moisture content
A
Moisture content is the amount of water left in the paper after manufacture. It is one of the important 
characteristics of the paper. This can change greatly depending on the storage environment,...

Appendix
172
A
Paper sizeA
1Postcard with the size specified by Japan Post Service Co., LTD
Paper sizemmin.
Letter8.5 × 11 in.
Legal8.5 × 14 in.
Executive7.25 × 10.5 in.
A4210 × 297 mm
A5148 × 210 mm
A 5 (Long Edge)210 × 148 mm
A6105 × 148 mm
Envelope Monarch3.875 × 7.5 in.
Envelope Com-104.12 × 9.5 in.
Envelope DL110 × 220 mm
Envelope C5162 × 229 mm
B5 (JIS)182 × 257 mm
B5 (ISO)176 × 250 mm
B6 (JIS)128 × 182 mm
B6 (ISO)125 × 176 mm
Folio8.5 × 13 in.
A 4 Long210 × 405 mm
Envelope DL-L 220 × 110 mm
3 × 53...

Appendix
173
A
Sy mbol and character sets (HL-3070CW only )A
For the HP LaserJet emulation modes, you can choose the symbol and character sets using a Web Based 
Management (Web browser) or the control panel buttons.
How to use Web Based Management (web browser)A
To use Web Based Management (Web browser), follow the steps below.
Note
We recommend Internet Explorer
® 6.0 (or greater) or Firefox 1.0 (or greater) for Windows® and Safari 1.3 
(or greater) for Macintosh. Please also make sure that JavaScript...

Appendix
174
A
Sy mbol and character sets listA
OCR symbol setsA
When you choose the OCR-A or OCR-B font, the matching symbol set is always used.
OCR A (0O)
OCR B (1O)
HP LaserJet mode
ABICOMP Brazil / Portugal (13P) ABICOMP International (14P)
Desktop (7J) Greek8 (8G)
HP German (0G) HP Spanish (1S)
ISO Latin1 (0N) ISO Latin2 (2N)
ISO Latin5 (5N) ISO Latin6 (6N)
ISO2 IRV (2U) ISO4 UK (1E)
ISO5 ASCII (0U) ISO10 Swedish (3S)
ISO11 Swedish (0S) ISO14 JIS ASCII (0K)
ISO15 Italian (0I) ISO16 Portuguese (4S)...

Appendix
175
A
PS Text (10J) Roman8 (8U)
Roman9 (4U) Roman Extension (0E)
Russian-GOST (12R) Symbol (19M) HP LaserJet mode
 

Appendix
176
A
Quick reference for bar code control commands
(HL-3070CW only )
A
The printer can print bar codes in the HP LaserJet emulation modes.
Print bar codes or expanded charactersA
Format: ESC i n ... n \
Creates bar codes or expanded characters according to the segment of parameters ‘n ... n’. For more 
information about parameters, see the following Definition of Parameters. This command must end with the 
‘  ’ code (5CH).
Definition of parametersA
This bar code command can have the following...

Appendix
177
A
This parameter selects the bar code mode as shown above. When n is ‘t5’ or ‘T5’ the bar code mode (EAN 
8, EAN 13, or UPC A) varies according to the number of characters in the data.
Bar code, expanded character, line block drawing and box drawingA
This parameter chooses the bar code style as above. When the EAN 8, EAN 13, UPC-A, Code 128 or EAN 
128 bar code mode is chosen, this bar code style parameter is ignored.
Expanded Character
‘S’
0 = White
1 = Black
2 = Vertical stripes
3 =...

Appendix
178
A
This parameter shows whether the printer prints the human readable line below the bar code. Human 
readable characters are always printed with OCR-B font of 10 pitch and all the current character style 
enhancements are masked. The default setting is determined by the bar code mode selected by ‘t’ or ‘T’.
Quiet zoneA
n = ‘onnn’ or ‘Onnn’ (nnn = 0 ~ 32767)
Quiet zone is the space on both sides of the bar codes. Its width can be shown using the units that are set by 
the ‘u’ or ‘U’...

Appendix
179
A
Bar code, expanded character, line block drawing and box drawing heightA
n = ‘hnnn’, ‘Hnnn’, ‘dnnn’, or ‘Dnnn’
1 EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A), ISBN (UPC-E): 22 mm
2 UPC-E: 18 mm
3 Others: 12 mm
Expanded characters i 2.2 mm (preset)
Line block drawing and box drawing i 1 dot
This parameter shows the height of bar codes or expanded characters as shown above. It can start with ‘h’, 
‘H’, ‘d’, or ‘D’. The height of bar codes is shown in the ‘u’- or ‘U’-specified unit. The...

Appendix
180
A

When FIM (US-Post Net) is selected with the parameter ‘t3’ or ‘T3’
Characters ‘A’ to ‘D’ are valid and one digit of data can be printed. Upper-case and lower-case alphabet 
characters can be accepted.

When Post Net (US-Post Net) is selected with the parameter ‘t4’ or ‘T4’
Numbers ‘0’ to ‘9 can be data and it must end with a check digit. ‘?’ can be used instead of the check digit.

When EAN 8, EAN 13, or UPC A is selected with the parameter ‘t5’ or ‘T5’
Ten numbers ‘0’ to ‘9’ can be...