Brother HL 2270DW User Manual

Appendix 
127
A
Print surfaceA
The characteristics of the face side and reverse side of a sheet of paper may vary a little.
Usually, the opening side of the paper ream package is the print side. Follow the instructions on the paper 
package. Typically, the print side is indicated by an arrow.
Moisture content
A
Moisture content is the amount of water left in the paper after manufacture. It is one of the important 
characteristics of the paper. This can change greatly depending on the storage environment,...

Appendix 
128
A
B5 (ISO)176  250 mm
B6 (ISO)125  176 mm
Folio8.5  13 in.
Post Card100  148 mm
Envelope DL-L220  110 mm
3  53  5in.
Paper sizemmin.
 

Appendix 
129
A
Symbol and character sets (HL-2250DN / HL-2270DW only)A
For the HP LaserJet emulation modes, you can choose the symbol and character sets using Web Based 
Management (Web browser) when connected to a network.
How to use Web Based Management (Web browser)A
To use Web Based Management (Web browser), follow the steps below.
Note
We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 3.0 (or greater) for Windows® and 
Safari 3.0 (or greater) for Macintosh. Please also make...

Appendix 
130
A
Symbol and character sets listA
OCR symbol setsA
When you choose the OCR-A or OCR-B font, the matching symbol set is always used.
OCR A (0O)
OCR B (1O)
HP LaserJet mode
ABICOMP Brazil / Portugal (13P) ABICOMP International (14P)
Desktop (7J) Greek8 (8G)
Hebrew7 (0H) HP German (0G)
HP Spanish (1S) ISO8859 / 5 Latin / Cyrillic (10N)
ISO8859 / 7 Latin / Greek (12N) ISO Latin1 (0N)
ISO Latin2 (2N) ISO Latin5 (5N)
ISO Latin6 (6N) ISO8859 / 15 Latin9 (9N)
ISO10 Swedish (3S) ISO11 Swedish (0S)...

Appendix 
131
A
PC-869 Greece (11G) Pi Font (15U)
PS Math (5M) PS Text (10J)
Roman8 (8U) Roman9 (4U)
Roman Extension (0E) Russian-GOST (12R)
Symbol (19M) Turkish8 (8T)
UKRAINIAN (14R) Ventura Intl (13J)
Ventura Math (6M) Ventura US (14J)
Windings (579R) Windows 3.0 (9U)
Windows Baltic (19L) Windows Cyrillic (9R)
Windows Greek (9G) Windows Latin1 (19U)
Windows Latin2 (9E) Windows Latin5 (5T) HP LaserJet mode
 

Appendix 
132
A
Quick reference for bar code control commands
(HL-2250DN / HL-2270DW only)
A
The machine can print bar codes in the HP LaserJet emulation modes.
Print bar codes or expanded charactersA
Format: ESC i n ... n \
Creates bar codes or expanded characters according to the segment of parameters ‘n ... n’. For more 
information about parameters, see the following Definition of Parameters. This command must end with the 
‘  ’ code (5CH).
Definition of parametersA
This bar code command can have the...

Appendix 
133
A
This parameter selects the bar code mode as shown above. When n is ‘t5’ or ‘T5’ the bar code mode (EAN 
8, EAN 13, or UPC A) varies according to the number of characters in the data.
Bar code, expanded character, line block drawing and box drawingA
This parameter chooses the bar code style as above. When the EAN 8, EAN 13, UPC-A, Code 128 or EAN 
128 bar code mode is chosen, this bar code style parameter is ignored.
Expanded Character
‘S’
0 = White
1 = Black
2 = Vertical stripes
3 =...

Appendix 
134
A
This parameter shows whether the machine prints the human readable line below the bar code. Human 
readable characters are always printed with OCR-B font of 10 pitch and all the current character style 
enhancements are masked. The default setting is determined by the bar code mode selected by ‘t’ or ‘T’.
Quiet zoneA
n = ‘onnn’ or ‘Onnn’ (nnn = 0 ~ 32767)
Quiet zone is the space on both sides of the bar codes. Its width can be shown using the units that are set by 
the ‘u’ or ‘U’...

Appendix 
135
A
Bar code, expanded character, line block drawing and box drawing heightA
n = ‘hnnn’, ‘Hnnn’, ‘dnnn’, or ‘Dnnn’
1 EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-A), ISBN (UPC-E): 22 mm
2UPC-E: 18mm
3 Others: 12 mm
Expanded characters i 2.2 mm (preset)
Line block drawing and box drawing i 1 dot
This parameter shows the height of bar codes or expanded characters as shown above. It can start with ‘h’, 
‘H’, ‘d’, or ‘D’. The height of bar codes is shown in the ‘u’- or ‘U’-specified unit. The...

Appendix 
136
A
When FIM (US-Post Net) is selected with the parameter ‘t3’ or ‘T3’
Characters ‘A’ to ‘D’ are valid and one digit of data can be printed. Upper-case and lower-case alphabet 
characters can be accepted.
When Post Net (US-Post Net) is selected with the parameter ‘t4’ or ‘T4’
Numbers ‘0’ to ‘9 can be data and it must end with a check digit. ‘?’ can be used instead of the check digit.
When EAN 8, EAN 13, or UPC A is selected with the parameter ‘t5’ or ‘T5’
Ten numbers ‘0’ to ‘9’ can be...