Brother HL 2240R User Manual

Appendix 
127
A
Computer requirementsA
1Microsoft® Internet Explorer® 6.0 or greater.
2Third party USB ports are not supported.
Computer Platform & Operating 
System Version Processor Minimum 
SpeedMinimum 
RAMRecomm
ended 
RAMHard 
Disk 
Space to 
installSupported 
PC 
Interface
2
Windows® 
Operating 
System
1
Windows® 2000 
ProfessionalIntel®Pentium®II or 
equivalent64MB 256MB 50MB USB, 
10BASE-T / 
100BASE-
TX 
(Ethernet), 
Wireless 
802.11b/g Windows
® XP 
Home Edition128 MB
Windows
® XP...

Appendix 
128
A
Important information for choosing your paperA
This section gives information to help you choose paper to use with this machine.
Note
If you use paper that is not recommended, a paper jam or misfeed may occur in the machine.
 
Before you buy a large quantity of paperA
Make sure that the paper is suitable for the machine.
Paper for plain paper copies
A
Paper is divided by usage, such as paper for printing and paper for copying. The usage is usually written on 
the paper’s package. Check...

Appendix 
129
A
Print surfaceA
The characteristics of the face side and reverse side of a sheet of paper may vary a little.
Usually, the opening side of the paper ream package is the print side. Follow the instructions on the paper 
package. Typically, the print side is indicated by an arrow.
Moisture content
A
Moisture content is the amount of water left in the paper after manufacture. It is one of the important 
characteristics of the paper. This can change greatly depending on the storage environment,...

Appendix 
130
A
Paper sizeA
Paper sizemmin.
Letter8.5  11 in.
Legal8.5  14 in.
Executive7.25  10.5 in.
A4210  297 mm
A5148  210 mm
A5 Long Edge210  148 mm
A6105  148 mm
Envelope Monarch3.875  7.5 in.
Envelope Com-104.12  9.5 in.
Envelope DL110  220 mm
Envelope C5162  229 mm
B5 (JIS)182  257 mm
B5 (ISO)176  250 mm
B6 (ISO)125  176 mm
Folio8.5  13 in.
Post Card100  148 mm
Envelope DL-L220  110 mm
3  53  5in.
 

Appendix 
131
A
Symbol and character sets (HL-2250DN / HL-2270DW only)A
For the HP LaserJet emulation modes, you can choose the symbol and character sets using Web Based 
Management (Web browser) when connected to a network.
How to use Web Based Management (Web browser)A
To use Web Based Management (Web browser), follow the steps below.
Note
We recommend Microsoft® Internet Explorer® 6.0 (or greater) or Firefox 3.0 (or greater) for Windows® and 
Safari 3.0 (or greater) for Macintosh. Please also make...

Appendix 
132
A
Symbol and character sets listA
OCR symbol setsA
When you choose the OCR-A or OCR-B font, the matching symbol set is always used.
OCR A (0O)
OCR B (1O)
HP LaserJet mode
ABICOMP Brazil / Portugal (13P) ABICOMP International (14P)
Desktop (7J) Greek8 (8G)
Hebrew7 (0H) HP German (0G)
HP Spanish (1S) ISO8859 / 5 Latin / Cyrillic (10N)
ISO8859 / 7 Latin / Greek (12N) ISO Latin1 (0N)
ISO Latin2 (2N) ISO Latin5 (5N)
ISO Latin6 (6N) ISO8859 / 15 Latin9 (9N)
ISO10 Swedish (3S) ISO11 Swedish (0S)...

Appendix 
133
A
PC-869 Greece (11G) Pi Font (15U)
PS Math (5M) PS Text (10J)
Roman8 (8U) Roman9 (4U)
Roman Extension (0E) Russian-GOST (12R)
Symbol (19M) Turkish8 (8T)
UKRAINIAN (14R) Ventura Intl (13J)
Ventura Math (6M) Ventura US (14J)
Windings (579R) Windows 3.0 (9U)
Windows Baltic (19L) Windows Cyrillic (9R)
Windows Greek (9G) Windows Latin1 (19U)
Windows Latin2 (9E) Windows Latin5 (5T) HP LaserJet mode
 

Appendix 
134
A
Quick reference for bar code control commands
(HL-2250DN / HL-2270DW only)
A
The machine can print bar codes in the HP LaserJet emulation modes.
Print bar codes or expanded charactersA
Format: ESC i n ... n \
Creates bar codes or expanded characters according to the segment of parameters ‘n ... n’. For more 
information about parameters, see the following Definition of Parameters. This command must end with the 
‘  ’ code (5CH).
Definition of parametersA
This bar code command can have the...

Appendix 
135
A
This parameter selects the bar code mode as shown above. When n is ‘t5’ or ‘T5’ the bar code mode (EAN 
8, EAN 13, or UPC A) varies according to the number of characters in the data.
Bar code, expanded character, line block drawing and box drawingA
This parameter chooses the bar code style as above. When the EAN 8, EAN 13, UPC-A, Code 128 or EAN 
128 bar code mode is chosen, this bar code style parameter is ignored.
Expanded Character
‘S’
0 = White
1 = Black
2 = Vertical stripes
3 =...

Appendix 
136
A
Bar code human readable line ON or OFFA
This parameter shows whether the machine prints the human readable line below the bar code. Human 
readable characters are always printed with OCR-B font of 10 pitch and all the current character style 
enhancements are masked. The default setting is determined by the bar code mode selected by ‘t’ or ‘T’.
Quiet zoneA
n = ‘onnn’ or ‘Onnn’ (nnn = 0 ~ 32767)
Quiet zone is the space on both sides of the bar codes. Its width can be shown using the units...