Brother DCP 8020 User Manual

USING YOUR DCP WITH A MACINTOSH®   11 - 4
Using the Brother Printer Driver with 
Your Apple
® Macintosh® (Mac OS X)
Choosing page setup options
1From application software such as Presto! PageManager®, click 
the File menu and select Page Setup. Make sure DCP-8020 or 
DCP-8025D is selected in the Format for pop-up menu. You 
can change the settings for 
Paper Size, Orientation and Scaling, then click OK.
2From application software such as Presto! PageManager®, click 
File menu and select Print. Click...

11 - 5   USING YOUR DCP WITH A MACINTOSH®
Specific settings
Set the Media Type, Resolution, Toner Save, and other settings.
Press Copies & Pages to select settings you want to change.
Duplex
Automatic Duplex is only available with the DCP-8025D.
 

USING YOUR DCP WITH A MACINTOSH®   11 - 6
Printer settings
 

11 - 7   USING YOUR DCP WITH A MACINTOSH®
Using the PS driver with your Apple® 
Macintosh
® 
For Mac OS 8.6 to 9.2 users
1For Mac® OS 8.6 to 9.04 Users:
Open the Apple Extras folder. Open the Apple LaserWriter 
Software folder.
For Mac
® OS 9.1 to 9.2 Users:
Open the Applications (Mac
® OS 9) folder. Open the Utilities 
folder.*
* The screens are based on Mac
® OS 9.04.
To use the PS driver on a Network, see the NC-9100h Network 
User’s Guide on CD-ROM.
To use the PS driver with a USB cable, you need to...

USING YOUR DCP WITH A MACINTOSH®   11 - 8
2Open the Desktop Printer Utility icon.
3Select Printer (USB), and then click OK.
 

11 - 9   USING YOUR DCP WITH A MACINTOSH®
4Click Change... in the PostScript® Printer Description (PPD) file.
Select Brother DCP-8025D, and then click Select.
5Click Change... in the USB Printer Selection.
Select Brother DCP-8025D, and then click OK.
 

USING YOUR DCP WITH A MACINTOSH®   11 - 10
6Click Create....
7Enter your DCP name (DCP-8025D), and then click Save.
8Select Quit from the File menu.
 

11 - 11   USING YOUR DCP WITH A MACINTOSH®
9Click the DCP-8025D icon on the Desktop.
10Select Set Default Printer from the Printing menu.
For Mac OS X users
You need to install the PS driver using the following instructions.
1Select Applications from the Go menu.
■If you use a USB cable and your Macintosh is “Mac OS X”, 
only one printer driver for a DCP can be registered in Print 
Center.
■If a Brother Native Driver (DCP-XXX) is already listed in 
Printer list, you will need to delete it and then...

USING YOUR DCP WITH A MACINTOSH®   11 - 12
2Open the Utilities folder.
3Open the Print Center icon.
4Click Add Printer… .
 

11 - 13   USING YOUR DCP WITH A MACINTOSH®
5Select USB.
6Select DCP-8025D, and then click Add.
7Select Quit Printer Center from the Print Center menu.