Brother DCP 7060DR User Manual

1
Start HereDCP-7055 / DCP-7057 / DCP-7060D
Quick Setup Guide
CHN-ENG Version A Please read the Safety and Legal booklet first before you set up your machine. Then, please read this Quick Setup 
Guide for the correct setup and installation.
To view the Quick Setup Guide in other languages, please visit http://solutions.brother.com/
.
1
Unpack the machine and check the components
WARNING indicates a potentially hazardous situation which, if not avoided, 
could result in death or serious injuries.
CAUTION...

2
WARNING
Plastic bags are used in the packaging of your machine. Plastic bags are not toys. To avoid danger of 
suffocation, please keep these bags away from babies and children and dispose of them correctly.
CAUTIONCAUTION
When you move the machine, grasp the side handholds that are under the scanner. DO NOT carry the machine 
by holding it at the bottom.
Note
• Keep a minimum gap around the machine as shown in the illustration.
• The components included in the box may differ depending on your...

3
2
Remove the packing 
material from the 
machine
aRemove the packing tape from the outside of 
the machine and the film covering the scanner 
glass.
bOpen the front cover.
cRemove the Silica Pack from the inside of the 
machine.
CAUTIONCAUTION
DO NOT eat the Silica Pack. Please discard. 
If ingested seek medical attention immediately.
dLift the elastic band off the drum.
ePull the paper strip to remove the protective 
material as shown in the illustration.
fTake out the drum unit and toner cartridge...

4
gGently shake it from side to side several times 
to distribute the toner evenly inside the 
assembly.
hPut the drum unit and toner cartridge assembly 
back in the machine.
iClose the front cover of the machine.
3
Load paper in the paper 
tray
aPull the paper tray completely out of the 
machine.
bWhile pressing the green paper-guide release 
levera, slide the paper guides to fit the paper 
size you are loading in the tray. Make sure that 
the guides are firmly in the slots.
1
 

5
cFan the stack of paper well to avoid paper jams 
and misfeeds.
dPut paper in the tray and make sure:
The paper is below the maximum paper 
mark (bbb)a.
Over filling the paper tray will cause paper 
jams.
The side to be printed on must be face down.
The paper guides touch the sides of the 
paper so it will feed correctly.
ePut the paper tray firmly back in the machine. 
Make sure that it is completely inserted into the 
machine.
4
Connect the power cord
aConnect the AC power cord to the machine,...

6
5
Choose your language
(If needed)
aPress Menu.
bPress a or b to choose 1.General Setup. 
Press OK.
cPress a or b to choose 0.Local Language.
Press OK.
dPress a or b to choose your language.
Press OK.
ePress Stop/Exit.
6
Set the LCD contrast 
(if needed)
If you are having difficulty reading the LCD, try 
changing the contrast setting.
aPress Menu.
bPress a or b to choose 1.General Setup. 
Press OK.
cPress a or b to choose 3.LCD Contrast. 
Press OK.
dPress a to increase the contrast.
—OR—
Press b to...

7
Windows
®USBMacintosh
 
7
Choose your connection type
For USB Interface Users
Windows®, go to page 8
Macintosh, go to page 10
Note
You can download the latest drivers and utilities for your machine from the Brother Solutions Center at 
http://solutions.brother.com/
.
 

8
Windows®USB
For USB Interface Users 
(Windows® 2000 Professional/XP/XP Professional x64 Edition/Windows Vista®/Windows® 7)
8
Before you install
aMake sure that your computer is ON and you 
are logged on with Administrator rights.
9
Install MFL-Pro Suite
aPut the installation CD-ROM into your 
CD-ROM drive. If the model name screen 
appears, choose your machine. If the language 
screen appears, choose your language.
bClick Initial Installation and then Install 
MFL-Pro Suite.
cClick Yes if you accept...

9
Windows®USB
Windows
®USBMacintosh
 
eConnect the USB cable to the USB connector 
marked with the   symbol on your machine 
and then connect the cable to your computer.
fTurn the machine on, and follow the on-screen 
instructions to complete setup.
 IMPORTANT
DO NOT cancel any of the screens during the 
installation. It may take a few seconds for all 
screens to appear.
Note
• For Windows Vista® and Windows®7 users, 
when the Windows Security screen appears, 
select the check box and click Install to...

10
MacintoshUSB
For USB Interface Users (Mac OS X 10.4.11 - 10.6.x)
8
Before you install
aMake sure your machine is connected to the 
power and your Macintosh is ON. You must be 
logged on with Administrator rights.
bConnect the USB cable to the USB connector 
marked with the   symbol on your machine 
and then connect the cable to your Macintosh.
cMake sure your machine’s power switch is on.
9
Install MFL-Pro Suite
aPut the installation CD-ROM into your 
CD-ROM drive.
bDouble-click the Start Here OSX...