Brother Dcp 385c User Manual

Printing photos from a memory card or USB Flash memory drive43
5
Print All Photos5
You can print all the photos on your memory 
card or USB Flash memory drive. 
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press (Photo Capture ). 
bPress a or  b to choose 
Print All Photos .
Press  OK.
cPress  + or  - repeatedly to enter the 
number of copies you want.
dDo one of the following: 
„ Change the print settings. (See 
page 45.) 
„ If you do not want to change any...

Chapter 5
44
Trimming5
You can trim your photo and print a part of the 
image. 
Note
If your photo is very small or has irregular 
proportions you may not be able to trim 
the photo. The LCD will display 
Image Too Small.  or 
Image Too Long.
 
aMake sure you have put a memory card 
or USB Flash memory drive in the 
correct slot.
Press ( Photo Capture ).
bPress a or  b to choose  Trimming.
Press  OK.
cPress  d or  c to choose your photo.
Press  OK.
dAdjust the red frame around your photo.
The part...

Printing photos from a memory card or USB Flash memory drive45
5
PhotoCapture Center™ print settings5
You can change the print settings temporarily for the next print. 
The machine returns to its default settings after 3 minutes.
Note
You can save the print settings you use most often by setting them as default. 
(See Setting your changes as a new default  on page 49.)
 
 
1 No. of prints
(For View Photo(s), Search by Date, Slide Show)
You can see the total number of photos that will be printed.
(For...

Chapter 5
46
Print Speed and Quality5
aPress  a or  b to choose 
Print Quality .
bPress d or  c to choose  Normal or 
Photo .
Press  OK.
cIf you do not want to change additional 
settings, press  Colour Start to print. 
Paper options5
Paper Type5
aPress a or  b to choose  Paper Type .
bPress d or  c to choose the paper type 
you are using,  Plain Paper , 
Inkjet Paper , Brother BP71  or 
Other Glossy . 
Press  OK.
cIf you do not want to change additional 
settings, press  Colour Start to print. 
Paper...

Printing photos from a memory card or USB Flash memory drive47
5
Adjusting Brightness, 
Contrast and Colour5
Brightness5
aPress 
a or  b to choose  Brightness .
bPress d or  c to make a darker or lighter 
print.
Press  OK.
cIf you do not want to change additional 
settings, press  Colour Start to print. 
Contrast5
You can choose the contrast setting. More 
contrast will make an image look sharper and 
more vivid.
aPress a or  b to choose  Contrast.
bPress d to  c to change the contrast.
Press  OK.
cIf...

Chapter 5
48
Cropping5
If your photo is too long or wide to fit the 
available space on your chosen layout, part 
of the image will automatically be cropped.
The factory setting is  On. If you want to print 
the whole image, turn this setting to  Off. If 
you are also using the Borderless setting, 
turn  Borderless  to Off . (See  Borderless 
printing  on page 48.)
aPress a or  b to choose  Cropping.
bPress d or  c to choose  Off (or On).
Press  OK.
cIf you do not want to change additional 
settings,...

Printing photos from a memory card or USB Flash memory drive49
5
Setting your changes as a 
new default5
You can save the print settings you use most 
often by setting them as the default settings. 
These settings will stay until you change 
them again.
aPress 
a or  b to choose your new setting.
Press  OK.
Repeat this step for each setting you 
want to change.
bAfter changing the last setting, press  a 
or  b to choose  Set New Default .
Press  OK.
cPress  + to choose  Yes.
dPress  Stop/Exit ....

Chapter 5
50
How to scan to a memory card 
or USB Flash memory drive5
You can scan monochrome and colour 
documents into a memory card or USB Flash 
memory drive. Monochrome documents will 
be stored in PDF (*.PDF) or TIFF (*.TIF) file 
formats. Colour documents may be stored in 
PDF (*.PDF) or JPEG (*.JPG) file formats. 
The factory setting is  Color 150 dpi and 
the default file format is PDF. The machine 
automatically creates file names based on 
the current date.(For details, see Quick Setup...

Printing photos from a memory card or USB Flash memory drive51
5
How to set new default5
You can set your own default setting.
aPress (Scan).
bPress  a or  b to choose 
Scan to Media .
Press  OK.
cPress  a or  b to choose 
Set New Default .
Press  OK.
dPress  + to choose  Yes.
ePress  Stop/Exit .
How to reset to factory 
settings5
You can reset the machine to factory settings.
aPress ( Scan).
bPress  a or  b to choose 
Scan to Media .
Press  OK.
cPress  a or  b to choose 
Factory Reset .
Press  OK....

52
6
Printing photos 
directly from a 
PictBridge camera
6
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
If your camera is using the USB Mass 
Storage standard, you can also print photos 
from a digital camera without PictBridge. See 
Printing photos directly from a digital camera 
(without PictBridge)  on page 53.
PictBridge requirements6
To avoid errors, remember the following 
points:
„...