Brother DCP 315CN User Manual

							WALK-UP PHOTOCAPTURE CENTER™   3 - 6
Printing images
Before you can print an individual image, you have to know the 
image number.
1Print the Index first. 
(See  Printing the Index (Thumbnails)  on page 3-5.)
2Make sure you have inserted the media card.
Press  (
PhotoCapture). (See page 3-3.)
3Press   or   to select 
Print Images.
Press 
Set.
4Press   repeatedly to enter the 
image number that you want to print 
from the Index page (Thumbnails).
Press 
Set.
Repeat this step until you have entered all the image numbers 
that you want to print.
5After you have selected all the image numbers, press Set again, 
and go to Step 6.
— OR —
If you have finished choosing settings, press 
Colour Start.
If your media card contains valid DPOF information, the LCD 
shows  DPOF Print:Yes , please go to DPOF printing  on page 
3-8.
■ Press   to decrease the image number.
■ You can enter all the numbers at one time by using the 
Copy Options key for hyphen.
(For example, Enter 
1, Copy Options, 5 to print images 
No.1 to No.5).
Print Images
No.:1,3,6
Downloaded from ManualsPrinter.com Manuals 
						

							3 - 7   WALK-UP PHOTOCAPTURE CENTER™
Paper Type & Paper Size
6Press   or   to select the type of paper you are using 
(Letter Glossy , 10x15cm Glossy , 13x18cm Glossy , 
A4 Glossy , Letter Plain , A4 Plain , Letter Inkjet , 
A4 Inkjet  or 10x15cm Inkjet ).
Press 
Set.
If you selected  A4 or  Letter , go to Step 7.
If you selected another size, go to Step 8.
— OR —
If you have finished choosing settings, press 
Colour Start.
Print Size
7If you selected  A4 or  Letter , press   or   to select the print 
size ( 10x8cm , 13x9cm , 15x10cm , 18x13cm , 20x15cm  or Max. 
Size ).
Press 
Set, and go to Step 8.
— OR —
If you have finished choosing settings, press 
Colour Start.
Printed Position for A4
Number of Copies
8Press   to enter the number of copies you want.
Press 
Set.
9Press Colour Start to print.
1  
10 x 8cm 2
 
13 x 9cm 3
 
15 x 10cm
4 
18 x 13cm
5 
20 x 15cm
6  
Max. Size
Press   to decrease the number of copies.
Your temporary settings will be kept until you take out the media 
card from the drive (slot), print images or press 
Stop/Exit.
Downloaded from ManualsPrinter.com Manuals 
						

							WALK-UP PHOTOCAPTURE CENTER™   3 - 8
DPOF printing
DPOF stands for Digital Print Order Format.
Major Digital Camera manufacturers (Canon Inc., Eastman Kodak 
Company, Fuji Photo Film Co. Ltd., Matsushita Electric Industrial Co. 
Ltd. and Sony Corporation.) created this standard to make it easier 
to print images from a digital camera.
If your digital camera supports DPOF printing, you will be able to 
select on the Digital Camera display the images and number of 
copies you want to print.
When the memory card (CompactFlash
®, SmartMedia®, Memory 
Stick®, Memory Stick Pro™, SecureDigital™, MultiMediaCard™ and 
xD-Picture Card™) containing DPOF information is put into your 
machine, you can print the selected image easily.
1Insert your media card into the 
proper drive (slot).
2Press  (PhotoCapture).
3Press   or   to select  Print Images.
Press 
Set.
4If there is a DPOF file on the card, 
the LCD shows:
5Press   or   to select  DPOF Print:Yes.
Press 
Set.
6Press   or   to select  Letter Glossy, 10x15cm Glossy , 
13x18cm Glossy , A4 Glossy , Letter Plain , A4 Plain , 
Letter Inkjet , A4 Inkjet  or 10x15cm Inkjet .
Press 
Set.
If you selected Letter or A4, press   or   to select the print 
size ( 10x8cm , 13x9cm , 15x10cm , 18x13cm , 20x15cm  or Max. 
Size ).
Press 
Set.
7Press Colour Start to print.
The media active message will be shown for 60 seconds and 
then disappear. Even in that case, you can enter the 
PhotoCapture mode by pressing 
PhotoCapture.
C.Flash Active
DPOF Print:Yes
Downloaded from ManualsPrinter.com Manuals 
						

							3 - 9   WALK-UP PHOTOCAPTURE CENTER™
Changing the default settings
You can save the PhotoCapture Center™ settings you use most often 
by setting them as default. These settings will remain until you 
change them again.
Increasing print speed or quality
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  1.Print Quality.
Press 
Set.
4Press   or   to select  Normal or Photo .
Press 
Set.
5Press Stop/Exit.
Setting paper and size
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  2.Paper & Size.
Press 
Set.
4Press   or   to select  Letter Glossy, 10x15cm Glossy , 
13x18cm Glossy , A4 Glossy , Letter Plain , A4 Plain , 
Letter Inkjet , A4 Inkjet  or 10x15cm Inkjet .
Press 
Set.
5If you selected  A4 or  Letter , press   or   to select the print 
size ( 10x8cm , 13x9cm , 15x10cm , 18x13cm , 20x15cm  or Max. 
Size ).
Press 
Set.
6Press Stop/Exit.
Downloaded from ManualsPrinter.com Manuals 
						

							WALK-UP PHOTOCAPTURE CENTER™   3 - 10
Adjusting brightness
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  3.Brightness.
Press 
Set.
4Press   to make a lighter print.
— OR —
Press   to make a darker print.
Press 
Set.
5Press Stop/Exit.
Adjusting contrast
You can select the contrast setting. More contrast will make an 
image look sharper and more vivid.
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  4.Contrast.
Press 
Set.
4Press   to increase the contrast.
— OR —
Press   to decrease the contrast.
Press 
Set.
5Press Stop/Exit.
Downloaded from ManualsPrinter.com Manuals 
						

							3 - 11   WALK-UP PHOTOCAPTURE CENTER™
Colour enhancement
You can turn on the colour enhancement feature to print more vivid 
images. Printing time will be slower.
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  5.Color Enhance.
Press 
Set.
4Press   or   to select  On.
Press 
Set.
— OR —
Select  Off and press 
Set, then go to Step 7.
5Press   or   to select  1.White Balance, 2.Sharpness  
or  3.Color Density .
Press 
Set.
6Press   or   to adjust the degree of setting.
Press 
Set.
7Press Stop/Exit.
■ White Balance
This setting adjusts the hue of the white areas of an image.
Lighting, camera settings and other influences will effect the 
appearance of white. The white areas of a picture may be slightly 
pink, yellow or some other colour. By using this adjustment you 
can correct this effect and bring the white areas back to pure white.
■ Sharpness
This setting enhances the detail of an image. It is similar to 
adjusting the fine focus on a camera. If the image is not in true 
focus and you cannot see the fine details of the picture, then 
adjust the sharpness.
■ Colour Density
This setting adjusts the total amount of colour in the image. You 
can increase or decrease the amount of colour in an image to 
improve a washed out or weak picture.
If you select  On, you can customize the White Balance, 
Sharpness or Colour Density.
Downloaded from ManualsPrinter.com Manuals 
						

							WALK-UP PHOTOCAPTURE CENTER™   3 - 12
Cropping
If your photo is too long or wide to fit the available space on your 
selected layout, part of the image will be automatically cropped.
The default setting is  On. If you want to print the whole image, turn 
this setting to  Off.
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  6.Cropping.
Press 
Set.
4Press   or   to select  Off (or On).
Press 
Set.
5Press Stop/Exit.

Cropping:On
Cropping:Off
Downloaded from ManualsPrinter.com Manuals 
						

							3 - 13   WALK-UP PHOTOCAPTURE CENTER™
Borderless
This feature expands the printable area to fit the edges of the paper. 
Printing time will be slightly slower.
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  7.Borderless.
Press 
Set.
4Press   or   to select  Off (or On).
Press 
Set.
5Press Stop/Exit.
Scan to Card (DCP-115C, DCP-120C 
and DCP-315CN only)
You can scan black and white and colour documents into a media 
card. Black and white documents will be stored in PDF (*.PDF) or 
TIFF file formats (*.TIF). Colour documents may be stored in PDF 
(*.PDF) or JPEG (*.JPG) file formats. The default setting is  Color 
150 dpi  and the default file format is PDF. File names default to the 
current date. For example, the fifth image scanned on July 1, 2005 
would be named 01070505.PDF. You can change the colour and 
quality as you want.
1Insert a SmartMedia®, CompactFlash®, Memory Stick®, 
Memory Stick Pro™, SecureDigital™, MultiMediaCard™ or 
xD-Picture Card™ into your machine.
Quality Selectable File Format Default File Format
B/W 200x100 dpi TIFF / PDF TIFF
B/W 200 dpi TIFF / PDF TIFF
Color 150 dpi JPEG / PDF PDF
Color 300 dpi JPEG / PDF PDF
Color 600 dpi JPEG / PDF PDF
You can select the default file format  for Black & White or colour files. 
(See  Changing the default black & white file format  on page 3-15 and 
Changing the default colour file format  on page 3-15.)
Downloaded from ManualsPrinter.com Manuals 
						

							WALK-UP PHOTOCAPTURE CENTER™   3 - 14
2Load your document.
3Press (Scan).
4Press   or   to select  Scan to Card.
To change quality, press 
Set and go to Step 5.
— OR —
Press 
Mono Start or Colour Start to start scanning without 
changing any settings.
5Press   or   to select the quality you want.
To change the file type, press 
Set and go to Step 6.
— OR —
To start scanning, press 
Mono Start or Colour Start.
6Press   or   to select the file type you want.
Press 
Mono Start or Colour Start to start scanning.
Changing the default quality
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  8.Scan to Card.
Press 
Set.
4Press   or   to select  1.Quality.
Press 
Set.
5Press  or  to select  B/W 200x100 dpi, B/W 200 dpi , 
Color 150 dpi , Color 300 dpi  or Color 600 dpi.
Press 
Set.
6Press Stop/Exit.
Do not take out the media card while PhotoCapture is blinking 
to avoid damaging the card or data stored on the card.
Downloaded from ManualsPrinter.com Manuals 
						

							3 - 15   WALK-UP PHOTOCAPTURE CENTER™
Changing the default black & white file format
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  8.Scan to Card.
Press 
Set.
4Press   or   to select  2.B/W File Type.
Press 
Set.
5Press   or   to select  TIFF or PDF .
Press 
Set.
6Press Stop/Exit.
Changing the default colour file format
1Press Menu.
2Press   or   to select  2.PhotoCapture.
Press 
Set.
3Press   or   to select  8.Scan to Card.
Press 
Set.
4Press   or   to select  3.ColorFile Type.
Press 
Set.
5Press   or   to select  PDF or JPEG .
Press 
Set.
6Press Stop/Exit.
Downloaded from ManualsPrinter.com Manuals