Brother DCP 185C User Manual

							
Printing photos from a memory card or USB Flash memory drive33
5
How to print from a 
memory card or USB 
Flash memory drive
5
Before printing a photo you must first print a 
thumbnail index to choose the number of the 
photo you want to print. Follow the 
instructions below to start printing directly 
from your memory card or USB Flash 
memory drive:
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot. The LCD will show the 
following message:
 
M.Stick Active
 
Press PhotoCa...
bPress Photo Capture . For DPOF 
printing, see  DPOF printing  on page 35.
cPress a or  b to choose  Print Index  
and then press  OK.
dPress  Colour Start  to start printing the 
index sheet. Make a note of the image 
number you want to print. See  Print 
Index (Thumbnails)  on page 33.
eTo print images press  a or  b to choose 
Print Images  in c and then press 
OK . (See  Printing Images  on page 34.)
fEnter the image number and press  OK.
gPress  Colour Start  to start printing.
Print Index (Thumbnails)5
The PhotoCapture Center™ assigns 
numbers for images (such as No.1, No.2, 
No.3, and so on).
 
The PhotoCapture Center™ uses these 
numbers to identify each picture. You can 
print a thumbnail page to show all the pictures 
on the memory card or USB Flash memory 
drive.
Note
Only file names that are 8 characters or 
less will be printed correctly on the index 
sheet.
 
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
Press ( Photo Capture ). 
bPress a or  b to choose  Print Index .
Press  OK.
cPress  a or  b to choose 
6 Images/Line  or 5 Images/Line . 
Press  OK.
Print time for 5 Images/Line will be 
slower than 6 Images/Line, but the 
quality is better.
   
6 Images/Line 5 Images/Line
Downloaded from ManualsPrinter.com Manuals 
						

							
Chapter 5
34
dPress  a or  b to choose the type of paper 
you are using,  Plain Paper , 
Inkjet Paper , Brother BP71  or 
Other Glossy .
Press  OK.
ePress  a or  b to choose the paper size 
you are using,  A4 or  Letter .
Press  OK.
fPress  Colour Start  to print.
Printing Images5
Before you can print an individual image, you 
have to know the image number.
aMake sure you have put the memory 
card or USB Flash memory drive in the 
correct slot.
bPrint the index first. (See  Print Index 
(Thumbnails)  on page 33.)
Press ( Photo Capture ). 
cPress a or  b to choose  Print Images . 
Press  OK.
Note
If your memory card or USB Flash 
memory drive contains valid DPOF 
information, the LCD will show 
DPOF Print:Yes , see DPOF printing  
on page 35.
 
dPress  a repeatedly to enter the image 
number that you want to print from the 
thumbnail index.
After you have chosen the image 
numbers, press  OK.
 
No.:1,3,6
Note
• Press  b to decrease the image number.
• You can enter a range of numbers at one  time by using the  Copy Options key for a 
hyphen. (For example, enter  1, 
Copy Options , 5 to print images No.1 to 
No.5).
• You can enter up to 12 characters  (including commas) for the image 
numbers you want to print.
 
eAfter you have selected the images you 
want to print, press  OK to select your 
settings.
If you have already chosen your 
settings, press  Colour Start.
fPress a or  b to choose the type of paper 
you are using,  Plain Paper , 
Inkjet Paper , Brother BP71  or 
Other Glossy . 
Press  OK.
gPress  a or  b to choose the paper size 
you are using,  Letter, A4 , 10x15cm  or 
13x18cm .
Press  OK.
„ If you selected Letter or A4, go to  h.
„ If you selected another size, go to  i.
„ If you have finished choosing 
settings, press  Colour Start.
hPress a or  b to choose the print size 
( 8 x 10cm , 9 x 13cm , 10x15cm , 
13x18cm , 15 x 20cm  or Max. Size ). 
Press  OK.
iDo one of the following:
„ To choose the number of copies go 
to  j.
„ If you have finished choosing 
settings, press  Colour Start.
jPress a or  b to enter the number of 
copies you want. Press  OK.
kPress  Colour Start  to print.
Downloaded from ManualsPrinter.com Manuals 
						

							
Printing photos from a memory card or USB Flash memory drive35
5
The printing positions when using A4 paper 
are shown below.
DPOF printing5
DPOF stands for Digital Print Order Format.
Major digital camera manufacturers (Canon 
Inc., Eastman Kodak Company, Fuji Photo 
Film Co. Ltd., Matsushita Electric Industrial 
Co. Ltd. and Sony Corporation) created this 
standard to make it easier to print images 
from a digital camera.
If your digital camera supports DPOF 
printing, you will be able to choose on the 
digital camera display the images and 
number of copies you want to print.
When a memory card containing DPOF 
information is put into your machine, you can 
print the chosen image easily.
aFirmly insert the memory card into the 
correct slot. 
 
M.Stick Active
Press ( Photo Capture ). 
bPress a or  b to choose  Print Images . 
Press  OK.
cIf there is a DPOF file on the card, the 
LCD will show:
 
DPOF Print:Yes  e
dPress a or  b to choose 
DPOF Print:Yes . Press OK.
ePress  a or  b to choose the type of paper 
you are using,  Plain Paper , 
Inkjet Paper , Brother BP71  or 
Other Glossy . 
Press  OK.
fPress  a or  b to choose the paper size 
you are using,  Letter, A4 , 10x15cm  or 
13x18cm .
Press  OK.
„ If you selected Letter or A4, go to  g.
„ If you selected another size, go to  h.
„ If you have finished choosing 
settings, press  Colour Start.
gPress a or  b to choose the print size 
( 8 x 10cm , 9 x 13cm , 10x15cm , 
13x18cm , 15 x 20cm  or Max. Size ). 
Press  OK.
hPress  Colour Start  to print.
Note
An DPOF File error can occur if the print 
order that was created on the camera has 
been corrupted. Delete and recreate the 
print order using your camera to correct 
this problem. For instructions on how to 
delete or recreate the print order, refer to 
your camera manufacture’s support 
website or accompanying documentation.
 
1
8x10cm 2
9 x 13cm3
10x15cm
 
  
4
13x18cm5
15x20cm6
Max. Size
 
  
Downloaded from ManualsPrinter.com Manuals 
						

							
Chapter 5
36
PhotoCapture Center™ 
print settings
5
These settings will remain until you change 
them again.
Print quality5
aPress  Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
1.Print Quality .
Press  OK.
dPress  a or  b to choose  Normal or 
Photo .
Press  OK.
ePress  Stop/Exit .
Paper Options5
Paper Type5
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose  2.Paper Type .
Press  OK.
dPress  a or  b to choose  Plain Paper , 
Inkjet Paper , Brother BP71  or 
Other Glossy .
Press  OK.
ePress  Stop/Exit .
Paper Size5
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose  3.Paper Size .
Press  OK.
dPress  a or  b to choose the paper size 
you are using,  Letter, A4 , 10x15cm  or 
13x18cm . 
Press  OK.
ePress  Stop/Exit .
Print Size5
This setting is available only when you select 
Letter or A4 in the paper size setting.
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose  4.Print Size .
Press  OK.
dPress  a or  b to choose the print size you 
are using, ( 8 x 10cm, 9 x 13cm , 
10x15cm , 13x18cm , 15 x 20cm  or 
Max. Size ). 
Press  OK.
ePress  Stop/Exit .
Downloaded from ManualsPrinter.com Manuals 
						

							
Printing photos from a memory card or USB Flash memory drive37
5
Colour Enhancement5
You can turn on the colour enhancement 
feature to print more vivid images.
Brightness5
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
5.Color Enhance .
Press  OK.
dPress  a or  b to choose  On (or  Off ). 
Press  OK.
„ If you choose  Off, then go to  g.
ePress  a or  b to choose  1.Brightness .
Press  OK.
fPress  a or  b to make a lighter or darker 
print.
Press  OK.
gPress  Stop/Exit .
Contrast5
You can select the contrast setting. More 
contrast will make an image look sharper and 
more vivid.
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
5.Color Enhance .
Press  OK.
dPress  a or  b to choose  On (or  Off ). 
Press  OK.
„ If you choose  Off, then go to  g.
ePress  a or  b to choose  2.Contrast .
Press  OK.
fPress  a or  b to increase or decrease the 
contrast.
Press  OK.
gPress  Stop/Exit .
White Balance5
You can adjust the white areas of an image 
and bring them back to pure white.
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
5.Color Enhance .
Press  OK.
dPress  a or  b to choose  On (or  Off ).
Press  OK.
„ If you choose  Off, then go to  g.
ePress  a or  b to choose 
3.White Balance .
Press  OK.
fPress  a or  b to adjust the degree of the 
balance.
Press  OK.
gPress  Stop/Exit .
Downloaded from ManualsPrinter.com Manuals 
						

							
Chapter 5
38
Sharpness5
You can enhance the focus of an image by 
adjusting the sharpness.
aPress  Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
5.Color Enhance .
Press  OK.
dPress  a or  b to choose  On (or  Off ).
Press  OK.
„ If you choose  Off, then go to  g.
ePress  a or  b to choose  4.Sharpness .
Press  OK.
fPress  a or  b to increase or decrease the 
sharpness.
Press  OK.
gPress  Stop/Exit .
Colour Density5
You can adjust the total amount of colour in 
the image to improve a washed out or weak 
picture.
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
5.Color Enhance .
Press  OK.
dPress  a or  b to choose  On (or  Off).
Press  OK.
„ If you choose  Off, then go to  g.
ePress  a or  b to choose 
5.Color Density .
Press  OK.
fPress  a or  b to increase or decrease the 
amount of colour.
Press  OK.
gPress  Stop/Exit .
Note
Choosing White Balance, Sharpness, or 
Colour Density will make printing time 
slower.
 
Downloaded from ManualsPrinter.com Manuals 
						

							
Printing photos from a memory card or USB Flash memory drive39
5
Cropping5
If your photo is too long or wide to fit the 
available space on your chosen layout, part 
of the image will be automatically cropped.
The default setting is On. If you want to print 
the whole image, turn this setting to  Off.
aPress  Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose  6.Cropping .
Press  OK.
dPress  a or  b to choose  Off (or On).
Press  OK.
ePress  Stop/Exit .
Cropping : On
  5
Cropping: Off  5
Borderless printing5
This feature expands the printable area to the 
edges of the paper. Printing time will be 
slightly slower.
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose  7.Borderless .
Press  OK.
dPress  a or  b to choose  Off (or On).
Press  OK.
ePress  Stop/Exit .
Date Print5
You can print the date if it is already in the 
data on your photo. The date will be printed 
on the lower right corner. If the data doesn’t 
have the date information, you cannot use 
this function.
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  aor b to choose  8.Date Print .
dPress aor b to choose  On (or  Off ).
Press  OK.
ePress  Stop/Exit .
Note
The DPOF setting on your camera must 
be turned off to use the  Date Print 
feature.
 
Downloaded from ManualsPrinter.com Manuals 
						

							
Chapter 5
40
Scan to a memory card 
or USB Flash memory 
drive
5
You can scan monochrome and colour 
documents into a memory card or USB Flash 
memory drive. Monochrome documents will 
be stored in PDF (*.PDF) or TIFF file formats 
(*.TIF). Colour documents may be stored in 
PDF (*.PDF) or JPEG (*.JPG) file formats. 
The default setting is  Color 150 dpi and 
the default file format is PDF. The machine 
automatically creates file names based on 
the current date. (For details, see the Quick 
Setup Guide.) For example, the fifth image 
scanned on July 1, 2009 would be named 
01070905.PDF. You can change the colour 
and quality. 
aInsert a Memory Stick®, Memory Stick 
Pro™, SD, SDHC, xD-Picture Card™ or 
USB Flash memory drive into your 
machine.
WARNING 
DO NOT take out the memory card or USB 
Flash memory drive while  Photo Capture 
is blinking to avoid damaging the card, USB 
Flash memory drive or data stored on the 
card.
 
bLoad your document.
cPress ( Scan).
dPress  a or  b to choose 
Scan to Media , do one of the 
following:
„ To change the quality press  OK and 
go to step  e.
„ To start scanning press  Mono Start 
or  Colour Start .
ePress a or  b to choose the quality, and 
then press  OK.
Do one of the following.
„ To change the file type, go to step  f.
„ To start scanning press  Mono Start 
or  Colour Start .
fPress a or  b to choose the file type and 
then press  OK.
Press  Mono Start  or Colour Start .
Changing the image quality5
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
0.Scan to Media .
Press  OK.
dPress  a or  b to choose  1.Quality .
Press  OK.
ePress  a or  b to choose  
Color 150 dpi , Color 300 dpi , 
Color 600 dpi , B/W 200x100 dpi  
or  B/W 200 dpi .
Press  OK.
fPress  Stop/Exit .
QualitySelectable File 
Format
Color 150 dpi JPEG  / PDF
Color 300 dpi JPEG  / PDF
Color 600 dpi JPEG  / PDF
B/W 200x100 dpi TIFF  / PDF
B/W 200 dpi TIFF  / PDF
Downloaded from ManualsPrinter.com Manuals 
						

							
Printing photos from a memory card or USB Flash memory drive41
5
Changing the monochrome 
file format5
aPress 
Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
0.Scan to Media .
Press  OK.
dPress  a or  b to choose 
2.B/W File Type .
Press  OK.
ePress  a or  b to choose  TIFF or PDF .
Press  OK.
fPress  Stop/Exit .
Changing the colour file 
format5
aPress Menu.
bPress  a or  b to choose 
2.PhotoCapture .
Press  OK.
cPress  a or  b to choose 
0.Scan to Media .
Press  OK.
dPress  a or  b to choose 
3.ColorFile Type .
Press  OK.
ePress  a or  b to choose  PDF or JPEG .
Press  OK.
fPress  Stop/Exit .
Understanding the 
Error Messages
5
Once you are familiar with the types of errors 
that can occur while you are using 
PhotoCapture Center™, you can easily 
identify and troubleshoot any problems.
„ Hub is Unusable.
This message will appear if a Hub or USB 
Flash memory drive with a Hub has been 
put into the USB direct interface.
„ Media Error
This message will appear if you put in a 
memory card that is either bad or not 
formatted, or when there is a problem with 
the media drive. To clear this error, take 
out the memory card.
„ No File
This message will appear if you try to 
access a memory card or USB Flash 
memory drive in the drive (slot) that does 
not contain a .JPG file.
„ Out of Memory
This message will appear if you are 
working with images that are too large for 
the machines memory.
This message will also appear when a 
memory card or USB Flash memory drive 
you are using does not have enough 
available space to scan the documents.
„ Media is Full.
This message will appear if you are trying 
to save more than 999 files in a memory 
card or USB Flash memory drive.
„ Unusable Device
This message will appear if a USB device 
or USB Flash memory drive that is not 
supported has been connected to the USB 
direct interface (For more information, visit 
us at http://solutions.brother.com.
). This 
message can also appear if you connect a 
broken device to the USB direct interface.
Downloaded from ManualsPrinter.com Manuals 
						

							
42
6
Printing photos 
directly from a 
PictBridge camera
6
 
Your Brother machine supports the 
PictBridge standard, allowing you to connect 
to and print photos directly from any 
PictBridge compatible digital camera.
If your camera is using the USB Mass 
Storage standard, you can also print photos 
from a digital camera without PictBridge. See 
Printing photos directly from a digital camera 
(without PictBridge)  on page 44. 
PictBridge requirements6
To avoid errors, remember the following points:
„The machine and the digital camera must 
be connected using a suitable USB cable.
„ The image file extension must be .JPG 
(other image file extensions like .JPEG, 
.TIF, .GIF and so on will not be 
recognized).
„ PhotoCapture Center™ operations are 
not available when using the PictBridge 
feature.
Setting your digital camera6
Make sure your camera is in PictBridge 
mode. Some of the settings listed below may 
not be available for your PictBridge 
compatible digital camera.
Depending on your camera some of these 
settings may not be available.
1See  DPOF printing  on page 43 for more details.
2If your camera is set to use the Printer Settings 
(Default setting), the machine will print your photo 
using the following settings.
„When your camera does not have any 
menu selections, this setting is also used.
„ The names and availability of each setting 
depends on the specification of your 
camera.
Please refer to the documentation supplied 
with your camera for more detailed 
information on changing PictBridge settings.
Printing photos from a camera 6
Camera Menu 
Selections Options
Paper Size Letter, A4, 10x15 cm,  Printer Settings (Default 
setting)
2
Paper Type Plain Paper, Glossy Paper, Inkjet Paper, 
Printer Settings (Default 
setting)
2
Layout Borderless: On, 
Borderless: Off, Printer 
Settings (Default setting)
2
DPOF setting1-
Print Quality Normal, Fine, Printer  Settings (Default setting)
2
Color 
EnhancementOn, Off, Printer Settings 
(Default setting)
2
Date Print On, Off, Printer Settings 
(Default setting)
2
Settings Options
Paper Size 10x15 cm
Paper Type Glossy Paper
Layout Borderless: On
Print Quality Fine
Color 
EnhancementOff
Date Print Off
Downloaded from ManualsPrinter.com Manuals