Home > Brother > Software > Brother Control Center 3 User Guide

Brother Control Center 3 User Guide

Here you can view all the pages of manual Brother Control Center 3 User Guide. The Brother manuals for Software are available online for free. You can easily download all the documents as PDF.

Page 191

USB cable scanning 
185
12
fPress a or b to choose File Type.
(For MFC-J615W and MFC-J630W) Press d or c to choose the file type you want.
Press OK.
(For DCP-J125, MFC-J220, MFC-J265W, MFC-J270W, MFC-J410W and MFC-J415W) Press a or b to 
choose the file type you want.
Press OK.
Do one of the following:
If you want to change the file name, go to step g.
Press Black Start or Color Start to start scanning without changing additional settings. Go to step h.
Note
• If you choose color in the quality...

Page 192

USB cable scanning 
186
12
How to set a new default for Scan to Media12
You can set your own default settings.
Setting the new default
12
aPress (SCAN).
bPress a or b to choose Scan to Media.
Press OK.
cPress and choose your new setting. Repeat this step for each setting you want to change.
dAfter changing the last setting, press a or b to choose Set New Default.
Press OK.
ePress 1 or   to choose Yes.
fPress Stop/Exit.
Factory reset
12
aPress (SCAN).
bPress a or b to choose Scan to Media.
Press OK....

Page 193

187
13
13
To use the machine as a network scanner, the machine must be configured with a TCP/IP address. You can 
set or change the address settings from the control panel (See Control Panel Setup in the Network User’s 
Guide) or by using the BRAdmin Light software. If you installed the machine following the instructions for a 
network user in the Quick Setup Guide then the machine should already be configured for your network.
Note
• For network scanning, a maximum of 25 clients can be connected to one...

Page 194

Network Scanning (For models with built-in network support) 
188
13
Configuring Network Scanning for Windows®13
If you are using a different machine than the one that was originally registered to your PC during the 
installation of MFL-Pro Suite software (see the Quick Setup Guide), follow the steps below.
a(Windows® 2000)
Click the Start button, Settings, Control Panel, then Scanners and Cameras.
(Windows
® XP)
Click the Start button, Control Panel, Printers and Other Hardware, then Scanners and Cameras...

Page 195

Network Scanning (For models with built-in network support) 
189
13
Note
(Windows Vista® and Windows®7)
If the User Account Control screen appears, do the following:
• (Windows Vista
®) For users who have administrator rights: Click Continue.
• (Windows
®7) For users who have administrator rights: Click Yes.
 
• (Windows Vista®) For users who do not have administrator rights: Enter the administrator password 
and click OK.
• (Windows
®7) For users who do not have administrator rights: Enter the...

Page 196

Network Scanning (For models with built-in network support) 
190
13
cClick the Network Setting tab and choose the appropriate connection method. 
Specifyyourmachinebyaddress
Enter the IP address of the machine in IP Address, and then click Apply.
Specifyyourmachinebyname
13
1Enter the machine node name in Node Name, or click Browse and choose the machine you want 
to use.
2Click OK.  

Page 197

Network Scanning (For models with built-in network support) 
191
13
dClick the Scan To Button tab and enter your PC name in the Display Name field. The machine’s LCD 
displays the name you enter. The default setting is your PC name. You can enter any name that you like.
 
eIf you want to avoid receiving unwanted documents, enter a 4-digit PIN number in the Pin number and 
Retype Pin number field. To send data to a PC protected by a PIN number, the LCD prompts you to 
enter the PIN number before the...

Page 198

Network Scanning (For models with built-in network support) 
192
13
Configuring network scanning for Macintosh13
If you want to scan from the machine on a network, you must choose the networked machine in the 
Device Selector application located in Macintosh HD/Library/Printers/Brother/Utilities/DeviceSelector or 
from the Model pop-up menu in the main screen of ControlCenter2. If you have already installed the MFL-Pro 
Suite Software following the network installation steps in the Quick Setup Guide then...

Page 199

Network Scanning (For models with built-in network support) 
193
13
Note
• To use the SCAN key features on the machine, click the check box for 
Register your computer with the Scan To functions at the machine. Then enter the name you 
want to be displayed on the machine LCD for your Macintosh. You can use up to 15 characters.
• You can avoid receiving unwanted documents by setting a 4-digit PIN number. Enter your PIN number in 
the PIN number and Retype PIN number field. To send data to a computer...

Page 200

Network Scanning (For models with built-in network support) 
194
13
Using the Scan key on your network13
Note
If you are connected using USB, see USB cable scanning on page 179.
 
Scan to E-mail (PC)13
When you choose Scan to E-mail (PC) your document will be scanned and sent directly to the computer you 
designated on your network. The ControlCenter software will launch the default E-mail application on the 
designated computer. You can scan and send a black and white or color document from the computer...
Start reading Brother Control Center 3 User Guide

Related Manuals for Brother Control Center 3 User Guide

All Brother manuals