Boxlight Projectowrite 2 User Manual

8
Part Names
Rear
A  MOUSE
Connect a USB mouse cable to a computer  
to control computer mouse functions.
B  RS232
Serial data port for controlling the projector  
with  a  computer  or  other  RS-232  control 
device.
C  AUDIO IN 1 & D AUDIO IN 2
Mini  jack  port  corresponds  to  computer  
input.
E  AUDIO OUT
F  RGB IN
Input  analog  RGB  video  signal  from  a  
computer.
G  RGB OUT
C o n n e c t   a n   e x t e r n a l   m o n i t o r   t o   t h i s  
connection to view the RGB IN input.
H  DVI-I...

Setting Up
9
Setting Up
Arrangement 
1.  Before installation, make sure that the projector is turned off and the power cord is disconnected. 
2.  Do not set up and move the projector, while it is hot. 
3.   The distance between the projector and screen determines the actual image size. Refer to the table 
below to determine the screen size at a given distance.
Note: The dimensions in the table below are approximate.
Screen size (diagonal) Distance (m) Distance (feet)
inch m Tele Wide Tele Wide40 1.0 0.95...

10
Setting Up
Power ON / OFF
Turning on the power
1.  Make sure that power cord is rmly and correctly connected to the projector.
2.  Remove the lens cover, and the POWER  indicator will light up in green.
3.  Press POWER button on the control panel or  the remote control to turn on the projector.
4. Rotate the zoom ring to adjust the screen size. 
5. Rotate the focus ring to adjust the focus.
Turning off the power
1.  Press the POWER button on the control  panel or the remote control. The “power off”...

11
Setting Up
Setting Up The Projector 
The projector supports the following four different projection methods. 
1.Front projection
2.Rear projection3.Rear ceiling projection 
4.Front ceiling projection
Special installation is required in order to suspend the projector from the ceiling. Please ask your  
dealer for details.  

12
Setting Up
Ceiling Mounted Installation Guide 
Attach ceiling mount at four-suspension bracket xing points when suspending from a ceiling.  
Special installation is required in order to suspend the projector from the ceiling. Please ask your 
dealer for detals.
Security Anchor
The product is equipped with security 
anchor and PIN LOCK functions to help 
prevent unauthorized removal projector.
MAX M4x8 mm For Mounting.
WARNING
Do not grasp the security anchor to carry projector, since it is not...

13
Setting Up
Adjusting The Projector’s Elevation
Use the adjustable foot at the front of the projector to set the image height.
1   Holding the projector, push the foot adjust buttons to loosen the front adjustable foot.
12   Position the front side of the projector to the desired height.
3   Release the foot adjust buttons in order to lock the front adjustable feet.
14   After making sure that the front adjustable feet are locked, put the projector gently  
atop.
 CAUTION
*  The adjustment range of...

14
Setting Up
AUDIO OUTMOUSERS-232AUDIO OUTDVI OUTVGA OUTVGA OUTRGB IN
AUDIO IN 
VIDEO OUT AUDIO OUT (L)&(R)
S-VIDEO OUTY Pb/Cb Pr/Cr
How To Connect
Laptop or desktop computer
Before starting, make sure that the projector and computer are both turned off.
Connect the computer cable.
Connect either end of the computer cable to the projector’s RGB IN.  
Connect the computer cable from the computer to the projector.
If needed, connect the MONITOR OUT to a monitor to view input from RGB IN.
Tighten the screw...

15
Setting Up
How To Connect 
Laptop or desktop computerConnect the audio cable if necessary
1.  If you connect end of the computer cable to the projector’s RGB IN. Please  connect one other end of the audio cable to the AUDIO IN 1.
2.  If you connect the DVI cable to the projector’s DVI-I IN. Please connect one  other end of the audio cable to the AUDIO IN 2.
3.  If you connect the S-Video/ Video/ Y,Pb,Pr port of the projector. Please connect  the other end of the audio cable to the AUDIO IN 3 jack on...

Remote Control
16
Remote Control
Remote Control Battery Installation
1. Remove the battery cover. 
2.  Load the batteries. Make sure the plus pole is correctly oriented.
3. Close the battery cover.
 Caution
 Avoid excessive heat and humidity. 
Do not drop the remote control. 
 Do not expose the remote control to water or moisture, this could result in malfunction. 
 If the remote control will not be used for an extended period, remove the battery.
 Replace the battery when remote control operation...

17
Remote Control
-        VOL        +
INPUT
ESC
MENU
AutoK
Still Blank
Power
Power on operation mode, standby mode, cool  
down mode.
ESC
Press “ ESC ” button to close “Menu” picture.
Volume +/-
Adjust Volume higher or lower.
Menu
Display or hide the On-Screen Display main 
menu page.
Keystone
Adjust the vertical keystone function.
Still
Keep the current image on the screen.