Boxlight Projector P12 User Manual

Auto Power Off (Min)Sets the countdown timer interval. The countdown timer will start 
when there is no signal being sent to the projector
. The projector 
will automatically power off when the countdown has finished (in 
minutes).
Lamp Settings
Refer to page 32.
High Altitude
On: The built-in fans run at high speed. Select this option when using the projector at altitudes above 2500 feet/762 meters or 
higher.
Off: The built-in fans automatically run at a variable speed ac -
cording to the internal...

Options |  
Lamp Settings
Lamp Hours Used (Normal)
Display the projection time of normal mode.
Lamp Hours Used (ECO)
Display the projection time of ECO mode.
Lamp Power Mode
Normal: Normal mode.
ECO: Use this function to dim the projector lamp which will 
lower power consumption and extend the lamp life.
Clear Lamp Hours
Choose “Yes” to reset the lamp hour counter.  
User Controls  

3D
 3D

Auto: When an HDMI 1.4a 3D timing identification signal is de
-
tected, the 3D image is selected automatically.
Choose “On” to enable 3D function.
Choose “Off” to disable 3D function.
3D Invert If you see a discrete or overlapping image while wearing DLP 
3D 
glasses, you may need to execute “Invert” to get best match of left/
right image sequence to get the correct image.
3D Format
Use this feature to select the 3D format. Options are: “Frame 
Packing ,” “Side-by-Side (Half) ,” “Top and...

Interactive
Interactive Settings
Choose “On” to enable Interactive function.
Choose “Off” to disable Interactive function.You need to unplug the Mini USB cable that connects NB/desktop 
with the projector before using the Interactive function. After you 
complete the Interactive Settings in OSD, use Mini USB cable to 
connect NB/desktop 
to the projector.
The Interac-
tive function is
available when
displaying graphic
source from HDMI/
VGA  input. Other
sources are  not
supported.
 If “3D” or “Dynam...

LAN
 Status
Display the network connection status.
 DHCP
Configure the DHCP settings.

On: Choose “On” to let the projector obtain an IP 
address 
automatically from your network.
Of f: Choose  “Off” to assign I P, Subnet Mask, Gateway, and DNS 
configuration manually.
IP Address
Display an IP address.
Subnet Mask
Display the subnet mask number.
Gateway
Display the default gateway of the network connected to the pro -
jector.
 DNS
Display the DNS number.
MAC Address
Display the MAC address.  
User...

Group Name
Display the group name.
Projector Name
Display the projector name.
 Location
Display the projector location.
 Contact
Display the contact information.  
User Controls  

How to use web browser to control your projector
1. Turn on DHCP to allow a DHCPserver to automatically assign an IP, or
manually enter the required network
information.
2. Then choose apply and press
button to complete the configuration
process.
3. Open your web browser and type in IP Address from the OSD LAN screen then
the web page will display as below: 4. Based on network web-page for the input-string in [tools] tab, the limitation
for Input-Length is in the below list
(“space” and the other...

When making a direct connection from your computer to the projector
Step 1: Find an IP Address (192.168.0.100) from LAN function of projector.
Step 2: Select apply and press “Enter” button to submit function or press “menu” key to  exit.
Step 5: Click Use the following IP  address, and type in as below:
1) IP address: 192.168.0.100
2) Subnet mask: 255.255.255.0
3) Default gateway:192.168.0.254
Step 6: To open Internet Options, click IE web browser, click Internet Options, 
click the Connections tab and...

Crestron RoomView Control 
Tool
Crestron RoomView™ provides a central monitoring station for 250
+ control systems on a single Ethernet network (more are possible - 
the number depends on the combination of IP ID and IP  address). 
Crestron RoomView monitors each projector, including projector’s 
online status, system power, lamp life, network setting and hardware 
faults, plus any custom attribute as defined by the Administrator. 
The Administrator can add, delete, or edit room information, contact...

3. Edit Attribute
4. Edit Event
For further information, please visit:
http://www.crestron.com & www
.crestron.com/getroomview.  
User Controls