Boxlight Mp-25t Users Guide

							– 21–
P-TIMER
MENUAUTO IMAGE
MUTE
VOLUMEMODE
FOCUS
ZOOM
FREEZE
NO SHOW
D. Z O
O
M
w
i
o!0
!3
!4 !1 e
qy r
u t
!2
!5
N
O
R
M
A
L
ON-OFF
!6
OPERATION OF REMOTE CONTROL
This remote control unit is not only able to operate the projector but also
usable as a wireless mouse for a PC. One pointing pad and two click buttons
are used for wireless mouse operation.
Wireless mouse is usable when PC mouse pointer is displayed on the
screen. When the menu or indicator of the projector is displayed on the
screen instead of the PC mouse pointer, the wireless mouse cannot be
used.
NOTE:To use the unit as a PC wireless mouse, connect the projector to the
PC with the attached cable. Signals from the projector are
transmitted to the PC, enabling the remote control unit of the
projector to be used as a PC wireless mouse. (Refer to
“CONNECTING THE PROJECTOR” in pages 10 to 14 for the
connection.)
FRONTSIDE 
						

							– 22–
qMODE BUTTON
Used to select source. (Computer 1, Computer 2 or Video 1 Input)
wLAMP POWER ON/OFF BUTTON
Used to turn the projection lamp on or off.
eVOLUME BUTTONS
Used to adjust volume.
rZOOM BUTTON
Used to select power zoom lens adjust.
tP-TIMER BUTTON
Used to operate the P-TIMER function.
yFOCUS BUTTON
Used to select focus adjust.
uNO SHOW BUTTON
Used to change the screen into black image.
iSOUND MUTE BUTTON
Used to mute sound.
oD. ZOOM BUTTON
Used to select digital zoom function.
!0FREEZE BUTTON
Use this button to freeze on-screen image.
!1AUTO IMAGE BUTTON
Used to operate the AUTO IMAGE function.
!2MENU BUTTON
This button will activate the MENU operation. Use this button, the POINT UP/DOWN/LEFT/RIGHT button and the
SELECT (REAR CLICK) button to make adjustments to the projector’s setting in MENU operation.
!3NORMAL BUTTON
Use to reset to normal picture adjustment preset by factory.
!4POINTING PAD (POINT UP/DOWN/LEFT/RIGHT BUTTON)
When in use as a remote for the projector.
To select an item on the MENU that you want to adjust. To select an item, move the arrow by pressing the pad upward,
downward, leftward or rightward.
Used to operate power zoom lens, power focus system or digital zoom function by pressing the pad either upward or
downward.
When in use as a wireless mouse
Used to move the pointer. The pointer is moved according to the direction you are pressing.
!5FRONT CLICK BUTTON
This button has the same function as the right button in a PC mouse. Pressing this button does not affect any operation
when in MENU mode.
!6SELECT (REAR CLICK) BUTTON
When in use as a remote for the projector.
This button has different functions depending on when used. This button is used to execute the item selected, to
increase or decrease the values in certain items such as CONTRAST or BRIGHTNESS.
When in use as a wireless mouse
This button has the same function as the left button in a PC mouse. 
						

							– 23–
REMOTE CONTROL BATTERY INSTALLATION
1 
Remove the battery
compartment lid.
2
Slide the batteries into the
compartment.
3 
Replace the compart-
ment lid.
Note: For correct polarity (+ and –
terminal), be sure the battery
terminals are in contact with
the pins in the compartment.
USING THE REMOTE CONTROL UNIT
Point the remote control toward the projector (Receiver window) whenever pressing the buttons. Maximum operating range
for the remote control is about 16.4’ (5m) and 60°front and rear of the projector.
To insure safe operation, please observe the following precautions:
¡Use (2) AA type alkaline batteries.
¡Change two batteries at the same time.
¡Do not use a new battery with a used battery.
¡Avoid contact with water.
¡Do not drop the remote control unit.
¡If batteries have leaked on the remote control, carefully wipe the case clean and load new
batteries.
16.4’
(5 m)16.4’
(5 m)
60° 60° 
						

							– 24–
CONTROL THE PROJECTOR
The projector has two types of operation: DIRECT OPERATION and MENU OPERATION. DIRECT OPERATION allows you
to operate the projector by using one button without showing the MENU. In MENU OPERATION mode, you display menus
where you can adjust the projector’s settings. Follow the instruction for each control.
DIRECT OPERATION
ADJUST ITEM
LAMP POWER ON/OFFLAMP POWER ON-OFF BUTTON LAMP POWER ON-OFF BUTTON
MODE SELECTMODE BUTTON
MODE BUTTON
SOUND VOLUMEVOLUME (+) and (–) BUTTONS VOLUME (+) and (–) BUTTONS
SOUND MUTENOT AVAILABLE MUTE BUTTON
ZOOMZOOM ( ) and ( ) BUTTONS
ZOOM BUTTON
POINT (UP/DOWN) BUTTON
FOCUSFOCUS ( ) and ( ) BUTTONS
FOCUS BUTTON
POINT (UP/DOWN) BUTTON
DIGITAL ZOOMNOT AVAILABLED. ZOOM BUTTON
SELECT (REAR CLICK) BUTTON
FRONT CLICK BUTTON
POINT (UP/DOWN/LEFT/RIGHT)
BUTTON
NORMAL PICTURENORMAL BUTTON NORMAL BUTTON
NO SHOWNOT AVAILABLE NO SHOW BUTTON
P. TIMERNOT AVAILABLE P-TIMER BUTTON
FREEZE PICTURENOT AVAILABLE FREEZE BUTTON
AUTO IMAGEAUTO IMAGE BUTTON AUTO IMAGE BUTTONTOP CONTROL 
OF THE PROJECTORREMOTE CONTROL UNIT 
						

							– 25–
ADJUST ITEM
SOUND
SOUND VOLUME
SOUND MUTEMENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON
MENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON LANGUAGE
SETTING
BLUE BACK
DISPLAY
CEILING
REAR
SPLIT WIPE
LAMP AGETOP CONTROL 
OF THE PROJECTORREMOTE CONTROL UNIT
1. COMPUTER/VIDEO MODE
ADJUST ITEM
COLOR SYSTEM
MENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON
MENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON PICTURE IMAGE
COLOR
TINT
CONTRAST
BRIGHTNESS
SHARPNESS
PICTURE SCREEN
WIDE
REGULARTOP CONTROL 
OF THE PROJECTORREMOTE CONTROL UNIT
2. VIDEO MODE
MENU OPERATION
ADJUST ITEM
MODE SELECT
MENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON TOP CONTROL 
OF THE PROJECTORREMOTE CONTROL UNIT 
						

							– 26–
ADJUST ITEM
COMPUTER SYSTEM
MENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON TOP CONTROL 
OF THE PROJECTORREMOTE CONTROL UNIT
3. COMPUTER MODE
AUTO IMAGE
FINE SYNC
TOTAL DOTS
POSITIONMENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON
PICTURE IMAGE
FINE SYNC
TOTAL DOTS
WHITE BALANCE
CONTRAST
BRIGHTNESSMENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON
PICTURE POSITIONMENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT LEFT/RIGHT/UP/DOWN
BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (LEFT/RIGHT/UP/DOWN)
BUTTON
SELECT (REAR CLICK) BUTTON
PC ADJUSTMENTMENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTONMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON
PICTURE SCREEN
TRUE
DIGITAL ZOOMMENU BUTTON
POINT LEFT/RIGHT BUTTONS
SELECT BUTTON
POINT UP/DOWN BUTTONS
SELECT BUTTON
POINT LEFT/RIGHT/UP/DOWN
BUTTONSMENU BUTTON
POINT (LEFT/RIGHT) BUTTON
SELECT (REAR CLICK) BUTTON
POINT (UP/DOWN) BUTTON
SELECT (REAR CLICK) BUTTON
SELECT (REAR CLICK) BUTTON
FRONT CLICK BUTTON
POINT (UP/DOWN/LEFT/RIGHT)
BUTTON
NOTES:
1. If you switch to DIRECT operation by pressing a DIRECT operation button while in MENU mode, the menus will
disappear and the MENU operation will end.
2. You can use the REMOTE CONTROL UNIT or the TOP CONTROL OF THE PROJECTOR to operate the MENU
operation. 
						

							– 27–
Connect the projector to a source (Computer, VCR, Video Camera, Video Disc Player, etc.) using the appropriate terminals
on the rear of the projector (See “CONNECTING THE PROJECTOR” section on pages 10-17).
Connect the projector’s AC power cord into a wall outlet and turn the MAIN ON/OFF switch (located on the rear of the
projector) to the ON position. The LAMP POWER indicator will light RED, the READY indicator will light GREEN.
Press the LAMP POWER ON/OFF button on the remote control unit or on the
projector to ON. The LAMP POWER indicator light will dim and the cooling fans will
operate. The wait display appears on the screen and the count-down starts (20-19-
18-...1). The signal from the source appears after 30 seconds.
20
USING THE PROJECTOR
TO TURN ON THE PROJECTOR
TO TURN OFF THE PROJECTOR
CAUTION:
TO MAINTAIN THE LIFE OF THE LAMP, ONCE YOU HAVE TURNED IT ON, WAIT AT LEAST 5 MINUTES
BEFORE TURNING IT OFF.
NOTE: TEMPERATURE WARNING INDICATOR flashes red, the projector will automatically turn off.
Wait at least 5 minutes before turning the projector on.
If the TEMPERATURE WARNING INDICATOR continues to flash, follow the procedures below:
(1). Press LAMP POWER ON/OFF button to OFF.
(2). Check the air filter for dust accumulation.
(3). Remove dust with vacuum cleaner (See “AIR FILTER CARE AND CLEANING” section on page 47.)
(4). Press LAMP POWER ON/OFF button to ON.
If the TEMPERATURE WARNING INDICATOR still continues to flash, call Boxlight Corporation at 1-800-762-
5757 or 360-779-7901.
Press the LAMP POWER ON/OFF button on the remote control unit or on the projector. The
“Power off ?’’ appears on the screen. Press again the LAMP POWER ON/OFF button to turn
OFF the projector. The LAMP POWER indicator will light bright and READY indicator will
turn off. The cooling fans will operate for 1 minute after the projector is turned off. (During
this “cooling down” period, the projector cannot be turned on.) The READY indicator will light
green again and the projector may be turned on by pressing the LAMP POWER ON/OFF
button. To power down completely, turn the MAIN ON/OFF switch (located on the rear of the
projector) to the OFF position.
DIRECT OPERATION
MODE SELECT
Press the MODE button (located on remote control unit or on the projector) to
select Computer 1, Computer 2 or Video 1 Input. The “Computer 1”, “Computer 2”
or “Video 1” display will appear on the screen for a few seconds. 
						

							– 28–
SOUND VOLUME ADJUSTMENT
Press the VOLUME buttons (located on remote control unit or on the projector) to adjust
the volume. The volume display will be displayed on the screen for a few seconds.
Pressing volume (+) will increase volume and increase the number on the screen.
Pressing volume (–) will decrease volume and decrease the number on the screen.
SOUND MUTE FUNCTION
Pressing the MUTE button on the remote control unit will mute audio. Press the MUTE
button again to restore audio to its previous level. The mute display will be displayed on
the screen for a few seconds.
ZOOM ADJUSTMENT (Top control)
Press the ZOOM ( ) or ( ) button to obtain your desired picture size. For a larger
picture, press ( ) and for a smaller picture, press ( ).
ZOOM ADJUSTMENT (Remote control unit)
Press the ZOOM button and press POINT UP/DOWN button(s) to obtain your desired
picture size. The Zoom display will be displayed on the screen for a few seconds. For a
larger picture, press (UP) and for a smaller picture, press (DOWN).
FOCUS ADJUSTMENT (Top control)
Press the FOCUS ( ) or ( ) button for a sharper, crisper picture.
FOCUS ADJUSTMENT (Remote control unit)
Press the FOCUS button and press POINT UP/DOWN button(s) to obtain a sharper,
crisper picture. The Focus display will be displayed on the screen for a few seconds.
DIGITAL ZOOM FUNCTION
Press the D. ZOOM button on the remote control unit. The message “Quit” is displayed to
indicate Digital Zoom mode. Digital zoom mode can be adjust the image size or pan the
image.
To expand the image size, press SELECT (REAR CLICK) button. The image is magnified
by degrees (Expand function).
To compress the image size, press FRONT CLICK button. The size of image is reduced
by degrees (Compress function).
To pan the image, press POINT UP/DOWN/LEFT/RIGHT (POINTING PAD) button(s).
The image move to the direction indicated (panning function). 
To cancel Digital Zoom mode, press other buttons (except NO SHOW button).
NORMAL PICTURE FUNCTION
The normal picture level is factory preset on the projector and can be restored anytime by
pressing the NORMAL button (located on remote control unit or on the projector). The
“Normal” display will be displayed on the screen for a few seconds.
NO SHOW FUNCTION
Press the NO SHOW button on the remote control unit. The screen will change into black
image and the “NO SHOW” is displayed on the screen for a few seconds.
This function is cancelled when the NO SHOW button is pressed again or any other
function button is pressed.
P-TIMER FUNCTION
Press the P-TIMER button on the remote control unit. The timer display “00:00” appears
on the screen and the timer starts to count the time (00:00 to 59:59).
Press again the P-TIMER button to stop the timer. Then press the P-TIMER button to
cancel the P-TIMER function.
FREEZE PICTURE FUNCTION
Press the FREEZE button on the remote control unit, and the picture will remain on-screen. This function is cancelled when
the FREEZE button is pressed again or any other function button is pressed.
NOTE:Your computer or video equipment is not affected by this function, and will continue to run.
AUTO IMAGE FUNCTION
Press the AUTO IMAGE button on the remote control unit or on the projector. The item(s) indicated “ON” in the AUTO IMAGE
FUNCTION are adjusted automatically. If all the items in AUTO IMAGE FUNCTION are “OFF”, AUTO IMAGE SETTING
display appears. If you wish to operate the AUTO IMAGE FUNCTION, perform the steps 3 - 9 of “AUTO IMAGE FUNCTION”
section on page 36.
Quit 
						

							MODE
SELECT
AUTO IMAGE NORMALMENU
– 29–
MENU OPERATION
In MENU OPERATION mode, you display menus where you can adjust the projector’s settings. You can use the TOP
CONTROL OF THE PROJECTOR or the REMOTE CONTROL UNIT.
MODE SELECT
You can select a mode using the MENU from among computer 1, computer 2 and video 1.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select Computer or Video and press the SELECT (REAR CLICK)
BUTTON. Another dialog box MODE DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to the mode you want (computer 1, computer 2 or video 1) to use by pressing the POINT UP/DOWN
BUTTON(s) and then press the SELECT (REAR CLICK) BUTTON.
MAIN MENU DISPLAY
MODE DISPLAY
MAIN MENU DISPLAY
MODE DISPLAY
P-TIMER
M
ENUA
U
TO
 IM
A
G
E
MUTE
VOLUMEMODE
FOCUS
ZOOM
FREEZE
NO SHOW
D. ZOOM
NORMAL
O
N
-O
F
F
REMOTE CONTROL
UNIT TOP CONTROL OF
THE PROJECTOR
MENU
BUTTON
POINT
(UP/DOWN/LEFT/RIGHT)
BUTTON
Pressing the button
upward, downward,
leftward or rightward.
POINT UP
BUTTON
POINT LEFT
BUTTON
SELECT
BUTTON
SELECT
(REAR CLICK)
BUTTON MENU
BUTTON
POINT DOWN
BUTTON
POINT RIGHT
BUTTON 
						

							– 30–
SOUND ADJUSTMENT
You can adjust the sound volume and sound mute used in the MENU.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select SOUND and press the SELECT (REAR CLICK) BUTTON. Another
dialog box SOUND ADJUST DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).
5. To increase the sound volume, point the arrow to and then press the SELECT (REAR CLICK) BUTTON. To decrease
the sound volume, point the arrow to and then press the SELECT (REAR CLICK) BUTTON.
6. To mute the sound, point the arrow to Mute and then press the SELECT (REAR CLICK) BUTTON. The mute display is
changed On from Off and mute the sound.
7. To quit the MENU, point to Quit and then press the SELECT (REAR CLICK) BUTTON.
LANGUAGE ADJUSTMENT
A language used in the MENU is selectable from among English, German, French, Italian, Spanish and Japanese.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select LANGUAGE and press the SELECT (REAR CLICK) BUTTON.
Another dialog box LANGUAGE SETTING DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to the language you want to use by pressing the POINT UP/DOWN BUTTON(s) and then press the
SELECT (REAR CLICK) BUTTON.
5. The setting is permanently held even if the MAIN ON/OFF is switched off.
MAIN MENU DISPLAY
MAIN MENU DISPLAY
LANGUAGE
SETTING DISPLAY SOUND ADJUST
DISPLAY