Boxlight Mp-25t Users Guide

USER’S GUIDE
BOXLIGHT MP-25t 

– 2 –
TO THE OWNER
As the owner of the Boxlight MP-25t, you are probably eager to try out your new projector. Before you do, we suggest that
you spend a little time reading this guide to familiarize yourself with the operating procedures, so that you will receive
maximum satisfaction from the many features included in your new projector.
This user’s guide will acquaint you with your projector’s features. Reading it will help us too. Through the years, we have
found that many service requests were not...

– 3 –
IMPORTANT SAFETY INSTRUCTIONS
All the safety and operating instructions should be read
before the product is operated.
Read all of the instructions given here and retain them for
later use. Unplug this projector from AC power supply
before cleaning. Do not use liquid or aerosol cleaners. Use
a damp cloth for cleaning.
Do not use attachments not recommended by the
manufacturer as they may cause hazards.
Do not place this projector on an unstable cart, stand, or
table. The projector may fall, causing...

– 4 –
TABLE OF CONTENTS
PAGE PAGE
INTRODUCTION 5
COMPATIBILITY 5
IMAGE RESOLUTION 5
PORTABILITY 5
UNPACKING THE PROJECTOR 5
TRADEMARKS 5
POWER REQUIREMENT 6
DESCRIPTION 7
SETTING-UP THE PROJECTOR 8-9
POSITIONING 8
ROOM LIGHT 8
VENTILATION 8
ADJUSTABLE FEET 9
MOVING THE PROJECTOR 9
CONNECTING THE PROJECTOR 10-17
CONNECTING THE COMPUTER 10-14
Connecting an IBM-compatible desktop computer 11
Connecting a Macintosh desktop computer 12
Connecting an IBM-compatible laptop computer 13
Connecting a Macintosh...

– 5 –
INTRODUCTION
The projector is a multimedia projector designed for portability, durability, and ease of use. The projector utilizes built-in
multimedia features, a palette of 16.77 million colors, and active matrix liquid crystal display (LCD) technology.
The projector is compatible with many different types of personal computers and video devices, including;
¡IBM-compatible computers, including laptops, up to 1024 x 768 resolution.
¡Apple Macintosh and PowerBook computers up to 1024 x 768...

– 6 –
POWER REQUIREMENTS
Your projector uses nominal input voltages of 100-120 VAC or
200-240 VAC. The projector automatically selects the correct
input voltage. The projector is designed to work with single-phase
power systems having a grounded neutral conductor. To reduce
the risk of electrical shock, do not plug into any other type of
power system.
Consult your authorized dealer or service station if you are not
sure what type of power is supplied to your building.
Connect the AC power
supply cord...

– 7 –
DESCRIPTION
SPEAKERS
INFRARED
REMOTE
RECEIVER PROJECTION LENS
FEET LOCK BUTTON
FEET LOCK
BUTTON REMOVABLE
LENS COVER
INFRARED
REMOTE
RECEIVER
MAIN ON/OFF
SWITCH
CARRYING
HANDLE
POWER CORD
CONNECTOR
LAMP COVERADJUSTABLE
FEET
AIR INTAKE VENTAIR INTAKE
VENT
FRONT
REAR
EXHAUST VENT
CAUTION HOT AIR !
Air blown from the exhaust vent is hot.
Observe the following when handling your
projector or choosing a location to install it.
¡Keep heat-sensitive objects away from the
exhaust port.
¡If you set the...

AIR INTAKE VENT
(BOTTOM SIDE)EXHAUST VENT
(REAR SIDE)
VENTILATION
This projector is equipped with a cooling fan to protect it from
overheating. Pay attention to the following to ensure the ventilation
and avoid a possible risk of fire and malfunction.
¡Do not cover the vents with papers or other materials.
¡Keep the rear grill at least 3.3’ (1m) away from any
object.
¡Make sure that there are no objects under the projector.
An object under the projector may prevent the projector
from taking the cooling...

Use the carrying handle when moving the projector.
Replace the lens cover and retract the adjustable feet
when moving the projector to prevent damage to the
projector.
– 9–
ADJUSTABLE FEET
Picture tilt and projection angle can be adjusted by ADJUSTABLE
FEET. Projection angle can be adjusted 0 to 6°.
1. Lift the front of the projector and press the feet lock buttons (left
and right) under the sides of the projector.
When the buttons are pressed, feet lock is released.
2. Release the buttons at desired...

– 10–
CONNECTING THE PROJECTOR
Your projector is equipped with various audio/video inputs and outputs including Computer HDB15-pin (VGA) terminals,
Monitor HDB15-pin (VGA) terminals and S-VHS video.
* NOTE: The RxD port (5 pin on the Serial Port) is provided on control port 2 connector only. If you control the projector by
computer, you must connect control port 2 connector.
CONNECTING THE COMPUTER
CONNECTING TO THE COMPUTER INPUT HDB15-PIN (VGA) TERMINALS (1 and 2)
Personal computers can be connected to...