Boxlight Mp-25t Users Guide

– 31–
COLOR SYSTEM SELECT (VIDEO MODE)
This projector is compatible with the five major broadcast video standards: PAL, SECAM, NTSC, NTSC 4.43 and PAL-M
(COLOR SYSTEMs). It automatically adjusts itself to optimize its performance for the incoming video (Except PAL-M).
However, if the video signal is not strong enough to detect the video format, the projector may not reproduce the proper
video image. In case this happens, this projector allows you to choose a specific broadcast signal format.
1. Connect...

– 32–
PICTURE IMAGE ADJUSTMENT (VIDEO MODE)
Although picture adjustments have been preset at the factory, you may want to change the setting.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press the SELECT (REAR CLICK) BUTTON. Another
dialog box IMAGE ADJUST DISPLAY will appear. This shows the current picture settings.
3. In this dialog box, you can adjust the settings by increasing or decreasing the levels shown as...

– 33–
PICTURE SCREEN ADJUSTMENT (VIDEO MODE)
This projector has the Wide function, which enables you to view a wider video image.
WIDE function
This projector is able to project not only a normal video image (with 4 x 3 aspect ratio), but also a wider video image by
compressing 4 x 3 image. This feature enable you to enjoy watching pictures like cinema images. You can switch either to
WIDE or to REGULAR screen mode. 
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the...

When the mark ( ) is displayed as
BLACK, computer system mode will be
available on the next page. Move an arrow
to the mark ( ) and press the SELECT
(REAR CLICK) BUTTON to show computer
system mode described on the next page.
– 34–
COMPUTER SYSTEM SELECT (COMPUTER MODE)
This projector is adjustable to different types of computer display signals based on VGA, SVGA or XGA (See
“COMPATIBLE COMPUTER SPECIFICATIONS” on the next page). If you set MODE SELECT to “COMPUTER”, the
projector will automatically...

– 35–
Specifications are subject to change without notice.
COMPATIBLE COMPUTER SPECIFICATIONS
ON-SCREEN
DISPLAYRESOLUTION
640 x 480 31.47 59.88
70.09
70.09
74.38
72.81
56.25
60.32
75.00
85.06
72.19
61.03
55.38
60.51
60.31
51.09
60.51
74.55
60
84.997
75.03
70.07
74.92
60.02
54.58
79.35 31.47
31.47
37.86
37.86
75.00
66.60
66.67 37.50
34.97
35.00
35.156
37.88
46.875
53.674
48.08
37.90
34.50
38.00
38.60
32.70
38.00
49.72
48.36
68.677
60.023
56.476
60.31
48.50
44.00
63.48 720 x 400
640 x 400
640 x 480
640 x...

– 36–
AUTO IMAGE ADJUSTMENT (COMPUTER MODE)
The Auto image function is provided to automatically adjust Fine sync., Total dots and Screen position for most computers.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select AUTO IMAGE and press the SELECT (REAR CLICK) BUTTON.
Another dialog box AUTO IMAGE SETTING DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to an item(s) you want to...

– 37–
PICTURE IMAGE ADJUSTMENT (COMPUTER MODE)
Picture adjustments have been preset at the factory. If you want to change the setting, operate the projector as follows.
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select IMAGE and press the SELECT (REAR CLICK) BUTTON. 
Another dialog box IMAGE ADJUST DISPLAY will appear. This shows the current picture settings.
3. In this dialog box, you can adjust the settings by increasing or...

– 38–
PICTURE POSITION ADJUSTMENT (COMPUTER MODE)
1. Press the MENU BUTTON and the MAIN MENU DISPLAY dialog box will appear.
2. Press the POINT LEFT/RIGHT BUTTON(s) to select POSITION and press the SELECT (REAR CLICK) BUTTON.
Another dialog box POSITION SETTING DISPLAY will appear.
3. Press the POINT DOWN BUTTON and a red arrow will appear.
4. Move the arrow to a desirable direction (b, a, cor d) by pressing the POINT LEFT/RIGHT/UP/DOWN BUTTON(s)
and press the SELECT (REAR CLICK) BUTTON to a desirable...

– 39–
PC ADJUSTMENT
This projector can automatically detect most display signals from most personal computers currently distributed. However,
some computers employ a special signal format which is different from the standard one and may not be detected by this
projector. If this happens, the projector cannot reproduce a proper image. Instead the image is often recognized as a
flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.
For those non-standard formats, this...

– 40–
6. Another dialog box “PC ADJUSTMENT DISPLAY 1” will appear and the parameter data for the Mode you have selected
is shown in this dialog box.
7. The parameters will be filled with the data determined by the projector according to the present signal input.
8. The function of the parameters and their values are summarized in the table below.
9. Move the arrow to an item that you want to adjust by pressing the POINT UP/DOWN BUTTON(s).
10. To increase the level, point the arrow to and then press the...