Boxlight Cp-635i Multimedia Lcd Projector Users Manual

							ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
NORSK
TECHNICAL
PORTGÊS
USERS MANUAL
Please read this users manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG
Bitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung
aufmerksam.
MANUEL DUTILISATION
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le
fonctionnement de lappareil.
MANUALE DISTRUZIONI
Vi preghiamo voler leggere attentamente il manuale dsitruzioni in modo tale da poter
comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el
producto.
GEBRUIKSAANWIJIZING
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te
hebben  van de uitgebreide mogelijkheden.
BRUKERHÅNDBOK
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
INSTRUÇÕES DO PROPRIETÁRIO
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do
usuário.
TECHNICAL 
REGULATORY NOTICES
Multimedia LCD Projector
CP-635i 
						

							ENGLISH
Multimedia LCD Projector
USERS MANUAL USERS MANUAL
ENGLISH-1
Thank you for purchasing this LCD projector.
CONTENTS CONTENTS
Page
FEATURES .......................................2
BEFORE USE ...................................2
Contents of Package ..............................2
Part Names.............................................3
Loading the Battery ................................5
Fixing the Handle....................................5
INSTALLATION ................................6
Installation of the Projector and Screen........6
Angle Adjustment ...................................6
Cabling ...................................................7
Power Connection ..................................8
Example of System Setup ......................8
Plug & Play .............................................8
OPERATIONS ...................................9
Power ON ..................................................9
Power OFF
..............................................9
Basic Operation ....................................10
Setup Menu ..........................................12
Input Menu............................................13
Image Menu..........................................14
Options Menu .......................................15
No Signal Menu ....................................16
MAINTENANCE ..............................17
Lamp.....................................................17
Air Filter ................................................19
Other Maintenance ...............................19
Page
TROUBLESHOOTING ....................20
OSD Message ......................................20
Indicators Message ..............................21
Symptom ..............................................22
SPECIFICATIONS...........................23
WARRANTY ....................................24
.......................................................................................
TABLES
Table 1. Installation Reference .................6
Table 2. Cabling .......................................7
Table 3. Basic Operation ........................10
Table 4. Setup Menu ..............................12
Table 5. Input Menu................................13
Table 6. Image Menu..............................14
Table 7. Options Menu ...........................15
Table 8. No Signal Menu ........................16
Table 9. OSD Message ..........................20
Table 10. Indicators Message ................21
Table 11. Symptom ................................22
Table 12. Specifications .........................23
.......................................................................................
For TECHNICAL and REGULATORY
NOTICE, see the end of this manual. • The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual 
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
TRADEMARK ACKNOWLEDGMENT :PS/2, VGA and XGA are registered trademarks of
International Business Machines Corporation. Apple, Mac and ADB are registered trademarks of
Apple Computer, Inc. VESA and SVGA are trademarks of the Video Electronics Standard
Association. Windows is a registered trademark of Microsoft Corporation. Carefully observe the
trademarks and registered trademarks of all companies, even when not mentioned.
NOTE
WARNING• Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USERS MANUAL” thoroughly to ensure correct
usage through understanding. After reading, store this instruction manual in a
safe place for future reference. 
						

							ENGLISH-2
FEATURES FEATURES
This liquid crystal projector is used to project various computer signals as well as NTSC / PAL /
SECAM video signals onto a screen. Little space is required for installation and large images can
easily be realized.
Outstanding Brightness
The UHB lamp and high-efficiency optical system assure a high level of brightness.
Partial Magnification Function
Interesting parts of images can be magnified for closer viewing. 
Distortion Correction Function
Distortion-free images are quickly available.
Extra-low Noise Function
Acoustic noise level from the unit can be reduced.
BEFORE USE BEFORE USE
Contents of Package
Make sure all of the following items are included in the package. If anything is missing, please
contact BOXLIGHT at 800-762-5757 or 360-779-7901.
•Keep the original packing material for future reshipment.NOTE
Projector
ENGLISHDEUTSCHFRANÇAISITALIANOESPAÑOLNEDERLANDSNORSKTECHNICALPORTGÊS
Liquid Crystal ProjectorCP-S370WUSERS MANUALPlease read this users manual thoroughly to ensure correct usage through understanding.BEDIENUNGSANLEITUNGBitte lessen Sie diese Bedienungsanleitung zugunsten der korrekten Bedienung
aufmerksam.MANUEL DUTILISATIONNous vous recommandons de lire attentivement ce manuel pour bien assimiler le
fonctionnement de lappareil.MANUALE DISTRUZIONIVi preghiamo voler leggere attentamente il manuale dsitruzioni in modo tale da poter
comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.MANUAL DE USUARIOLea cuidadosamente este manual del usuario para poder utilizar corretamente el
producto.GEBRUIKSAANWIJIZINGLees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te
hebben  van de uitgebreide mogelijkheden.BRUKERHÅNDBOKVennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.INSTRUÇÕES DO PROPRIETÁRIOPara assegurar o uso correto do equipamento, por favor leia atentamente este manual do
usuário.TECHNICAL 
REGULATORY NOTICES
User’s Manual
(this manual)
Safety Instructions
Carrying BagPower Cord 
(US Type)
Power Cord
(Europe Type)
RGB CableMouse cable
(PS/2)
Handle
Component 
Video Cable 
(with green lead)
VIDEOSTANDBY/ONKEYSTONE
POSITION
FREEZE MAGNIFY
VOLUME
AUTO
OFFBLANK
MENU
SELECT
RGB
MUTE
MENU RESET
Remote Controller
containing Battery 
						

							ENGLISH-3
B B B B
E E E E
F F F F
O O O O
R R R R
E E E E
       
U U U U
S S S S
E E E E
       
( ( ( (
c c c c
o o o o
n n n n
t t t t
i i i i
n n n n
u u u u
e e e e
d d d d
) ) ) )
ENGLISH
Part Names
Control Panel (Refer to P.9 OPERATIONS)
Power Switch
AC Inlet
(to the Power Cord)
Ventilation Openings
(Intake)Zoom Knob
Focus Ring
Remote Control Sensor
Lens
Lens Cap
FRONT/LEFT VIEW OF
THE PROJECTOR
Speaker
Handle Hook
STANDBY/ON Button
KEYSTONE Button
Foot Adjuster Button
Filter Cover
Air Filter and Intake
for the Cooling Fan
Rear Foot AdjusterINPUT Button
LAMP Indicator
TEMP Indicator
POWER Indicator
RESET Button
MENU Button
Ventilation Openings
(exhaust)
REAR/RIGHT VIEW OF
THE PROJECTORTerminal Panel
(Refer below)
TERMINAL PANEL S-VIDEO Terminal
COMPONENT VIDEO
Y Terminal
C
B/PBTerminal
CR/PRTerminal
VIDEO IN Terminal
AUDIO IN RTerminal
AUDIO IN LTerminal
AUDIO IN 1Terminal
AUDIO IN 2Terminal
AUDIO OUTTerminalRemote Control Sensor
RGB IN 1 Terminal
RGB IN 2 Terminal
CONTROL Terminal
RGB OUT Terminal
USB Terminal
AUDIO IN VIDEO IN S-VIDEO IN
AUD IO
INAUDIO OUT
112
2 USBRGB  IN
RGB  OUT CONTROL
(                                 )
Foot Adjuster  
						

							ENGLISH-4
B B B B
E E E E
F F F F
O O O O
R R R R
E E E E
       
U U U U
S S S S
E E E E
       
( ( ( (
c c c c
o o o o
n n n n
t t t t
i i i i
n n n n
u u u u
e e e e
d d d d
) ) ) )
REMOTE CONTROLLER
(Refer to P.9 OPERATIONS)
• Keep the remote controller away from children and pets.
• Do not give the remote controller any physical impact. Take care not to drop. 
• Do not place the heavy objects on the remote controller.
• Do not wet the remote controller or place it on any wet object. 
• Do not place the remote controller close to the cooling fan of the projector.
• Do not disassemble the remote controller.
NOTEThese functions work when the mouse control function is activated. Remember, the POSITION,
VOLUME, KEYSTONE,  BLANK ON and MENU ON functions disable the mouse control function.
Part Names (continued)
VIDEOSTANDBY/ON
KEYSTONE
POSITION
FREEZE MAGNIFY
VOLUME
AUTO
OFF
BLANK
MENU
SELECT
RGB
MUTE
MENU RESET
STANDBY/ON Button
KEYSTONE Button
Button
MENU Button
MAGNIFY Button
MAGNIFY Button
MAGNIFY Button
AUTO Button
Battery Holder
OFF
VIDEO Button
RGB Button
MENU SELECT Button
POSITION Button
RESET Button
VOLUME Button
VOLUME Button
FREEZE Button
MUTE Button
BLANK Button
Used to operate
the mouse shift
function .
Used to click the left
mouse button.
Used to click the right
mouse button. 
						

							ENGLISH-5
B
B
B
B
E
E
E
E
F
F
F
F
O
O
O
O
R
R
R
R
E
E
E
E
 
 
 
 
U
U
U
U
S
S
S
S
E
E
E
E
 
 
 
 
(
(
(
(
c
c
c
c
o
o
o
o
n
n
n
n
t
t
t
t
i
i
i
i
n
n
n
n
u
u
u
u
e
e
e
e
d
d
d
d
)
)
)
)
ENGLISH
Replace the batteries when remote control transmitter operation becomes \
difficult.NOTE
CAUTION• Make sure the handle is fixed before carrying the projector with
the handle. If the projector should be dropped from the handle should be\
 off,
it could result in an injury, and continued use could result in fire or \
electrical
shock. Do not flourish the projector with the handle.
Fixing the Handle
Fix the enclosed handle if you need.
1. Raise up the handle hook, and pass one end of the handle through the hole of handle hook.
2. Buckle the end of the handle, as the right drawing.
3. Fix the other end of the handle to the other handle hook in the same way.
1
2
Loading the Battery
First Loading:In original packing, the battery is installed in the battery holder of
the remote controller with protection film (the transparent film some
of which is inside the battery holder). Pull out the protection film  to
load the battery.
Replacing:1. See the reverse side of the remote controller.
2. Pinch the groove and pull out battery holder as the drawing right.
3. Remove the worn battery.
4. Install the new battery with “+” side facing.
5. Push in and click the battery holder.
Pull out “
+ ” side
Battery Holder
CAUTION•Incorrect handling of the battery could result in fire or personal injur\
y. The
battery may explode if not handled properly. Be careful in handling the \
battery
according to instructions of accompaning manual SAFETY INSTRUCTIONS an\
d this
manual.
• Use the 3V micro lithium battery type no.CR2025 only.
• When loading the battery, make sure the plus and minus terminals ar\
e correctly oriented as
indicated in the remote controller.
• When you dispose the battery, you should obey the law in the relati\
ve area or country.
• Keep the battery away from children and pets.
• When not to be used for an extended period, remove the battery from\
 the remote controller.  
						

							ENGLISH-6
INSTALLATION INSTALLATION
Installation of the Projector and Screen
Refer to the drawing and table below for determining the screen size and projection distance.
Top View
Side View
Screen size
[inches (m)]a[inches (m)]
Min.Max.
40  (1.0)62  (1.6)82  (2.1)
60  (1.5)94  (2.4)123  (3.1)
80  (2.0)127  (3.2)164  (4.2)
100  (2.5)160  (4.1)205  (5.2)
120  (3.0)192  (4.9)246  (6.3)
150  (3.8)241  (6.1)308  (7.8)
200  (5.0)323  (8.2)411 (10.4)
Angle Adjustment
Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable
within 0˚ to 9˚ approximately.
1. Lift up the front side of the projector, and pressing the foot adjuster button, adjust the projection
angle.
2. Release the button to lock at the desired angle.
3. Use the rear foot adjuster to adjust the left-right slope. Do not force the foot adjuster screw. 
This could damage the adjuster or cause the lock to fail. The projection distances shown in the table below are for
full size (800 x 600 dots).
a: Distance from the projector to the screen. (±10%)
Table 1. Installation Reference
a
CAUTION• Install the projector in a suitable environment according to instructions of
the accompanying manual “SAFETY INSTRUCTIONS” and this manual.
• When you fix this unit with a metal tool and the like, you must connect it with ground
wire; otherwise, fire or electric shock can result.
Connect the ground terminal of AC inlet of this unit with the ground terminal provided at the
building using an optional three-core power-supply cord.
• Please basically use liquid crystal projector at the horizontal position. 
If you use liquid
crystal projector by the lens up position, the lens down position and the side up position, this
may cause the heat inside to build up and cause damage.
Be especially careful not to install it
with ventilation holes blocked.
• Do not install LCD projector in smoke effected environment. Smoke residue may buildup
on critical parts (i.e.LCD panel, Lens Assy etc.).
CAUTION• Do not release the foot adjuster button unless the projector is being held;
otherwise, the projector could overturn or fingers could get caught and cause personal
injury.
Foot AdjusterPress the foot adjuster buttonRear Foot Adjuster 
						

							ENGLISH-7
ENGLISH
I I I I
N N N N
S S S S
T T T T
A A A A
L L L L
L L L L
A A A A
T T T T
I I I I
O O O O
N N N N
       
( ( ( (
c c c c
o o o o
n n n n
t t t t
i i i i
n n n n
u u u u
e e e e
d d d d
) ) ) )
• Before connecting, read instruction manuals of the devices to be connected, and make sure that the
projector is compatible with the device. 
• Secure the screws on the connectors and tighten.
• For some RGB input modes, the optional Mac adapter is necessary.
• Some computers may have multiple display screen modes. Use of some of these modes will not be possible
with this projector.
• Refer to the “TECHNICAL” section for the pin assignment of connectors and RS-232C communication data.NOTE
CAUTION• Incorrect connecting could result in fire or electrical shock.
Please read this manual and the separate “SAFETY INSTRUCTIONS”.
• Before connecting, turn off to all devices to be connected, except for the USB
cable.
• The cables may have to be used with the core set to the projector side. Use the
cables which are included with the projector or specified.
Cabling
Refer to the table below for connecting each terminal of the projector to a device.
Table 2. Cabling
FunctionTerminalCable
RGB inputRGB IN 1RGB cable with D-sub 15-pin shrink jack
and inch thread screwsRGB IN 2
RGB outputRGB OUT
Audio input
(from the computer)
AUDIO IN 1
(interlocked with RGB IN 1)
Audio cable with stereo mini jackAUDIO IN 2
(interlocked with RGB IN 2)
PS/2 mouse control
CONTROL
PS/2 mouse cable
ADB mouse controlADB mouse cable
Serial mouse controlSerial mouse cable
RS-232C communicationRS-232C cable
USB mouse controlUSBUSB cable
S-video inputS-VIDEO INS-video cable with mini DIN 4-pin jack
Video inputVIDEO INVideo/Audio cable
Component video input
COMPONENT VIDEO Y
Component video cableCOMPONENT VIDEO CB/PB
COMPONENT VIDEO CR/PR
Audio input
(from video equipment)AUDIO IN LVideo/Audio cable or optional audio cable
with RCA jack
AUDIO IN R
Audio outputAUDIO OUTAudio cable with stereo mini jack 
						

							AUDIO INCOMPONENT VIDEO
VIDEO IN S-VIDEO IN
AUDIO
INAUDIO OUT
112
2USBRGB  IN
RGB  OUTCONTROL
Example of System Setup
S-Video Tape
Recorder 
Computer
(notebook type)
• When connecting with a notebook computer, set the proper RGB external image output
(setting CRT display or simultaneous display of LCD and CRT). Please read instruction manual of
the notebook for more information.
Plug & Play
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer
that is VESA DDC (Display Data Channel) compatible.
Please use this function by connecting the accessory RGB cable with RGB IN 1 terminal (DDC
1/2B compatible). Plug & play may not operate by other connections.
• Plug & play is a system configured with peripheral equipment including a computer,
display and an operating system.
• This projector is recognized as a plug & play monitor. Use the standard display drivers. 
• Plug & play may not operate by the computer to connect. Use the RGB IN 2 terminal if plug &
play does not operate correctly.
NOTE
NOTE
ENGLISH-8
I I I I
N N N N
S S S S
T T T T
A A A A
L L L L
L L L L
A A A A
T T T T
I I I I
O O O O
N N N N
       
( ( ( (
c c c c
o o o o
n n n n
t t t t
i i i i
n n n n
u u u u
e e e e
d d d d
) ) ) )
Power Connection
Use the correct power cord depending on the power outlet to be used.
Connect the AC inlet of the projector to the power outlet firmly by the power cord.
AC Inlet Power CordPower 
outlet
Speaker with
amplifierDisplay
Monitor
CAUTION• Be carful in handling the power
cord according to instructions of the
accompanying manual SAFETY INSTRUCTIONS
and this manual.
• Connect the power cord firmly. Avoid using a
loose, unsound outlet failed or contact.
Computer
(desktop type) DVD Player 
						

							ENGLISH-9
ENGLISH
ENGLISH-9
OPERATIONS
OPERATIONS
Power ON1. Check that the power cord is connected correctly.
2. Set the power switch to [ | ]. The standby mode is selected, and the \
POWER indicator is turned to
orange.
3. Press the STANDBY/ON button  on the control panel or the remote control transmitter. Warm-up begins and the POWER indicator blinks in green.
4. The POWER indicator ceases blinking and turns to green when power is \
on. Remove the lens cap. 5. Adjust picture size using the zoom knob.
6. Adjust focus using the focus ring .
Power OFF1. Press the STANDBY/ON button  on the control panel or the remote controller. Then,the message Power off? will appear on the screen, and the message will dis\
appear by any operation
or no operation for 5 seconds. During this message indication, press the\
 STANDBY/ON 
button again. The projector lamp is extinguished and lamp cooling begins\
. The POWER indicator
blinks orange during lamp cooling. Pressing the STANDBY/ON button  has no effect while
the POWER indicator is blinking.
2. The system assumes the Standby mode when cooling is complete, and the\
 POWER indicator ceases blinking and changes to orange. Check that the indicator is orang\
e and set the power
switch to [
O].
3. The POWER indicator is extinguished when power is off. Do not forget \
to replace the lens cap.
VIDEOSTANDBY/ON
KEYSTONE
POSITION
FREEZE
MAGNIFY
VOLUME
AUTO
OFFBLANK
MENU
SELECT
RGB
MUTE
MENU RESET
STANDBY/
ON Button
• Except in emergencies, follow the above-mentioned procedure for turning \
power off. If the
projector is used improperly, it may very difficult to turn off the proj\
ector caused by heating inside the
unit. And the reduction of life time of lamp and LCD panels will be caus\
ed by incorrect procedure.
• To prevent any trouble, turn on/off the projector when the computer\
 or video tape recorder is OFF.
Providing a RS-232C cable is connected, turn on the computer before the \
projector.
• When a projector continues projecting the same image, the image may\
 remain as an afterimage.
Please do not project the image same for a long time.
NOTE
WARNING• Please read this manual, and the separate “SAFETY
INSTRUCTIONS” thoroughly before using the equipment. Always ensure th\
at
the equipment is used safely.
Power SwitchLens Cap
STANDBY/ON Button
POWER Indicator
Zoom Knob
Focus Ring