Bose Sa5 Manual
Here you can view all the pages of manual Bose Sa5 Manual. The Bose manuals for Amplifier are available online for free. You can easily download all the documents as PDF.
Page 21
English - 21 Care and Maintenance Troubleshooting Problem What to do Cannot complete network setup• Connect the system to AC (mains) power. • Select correct network name and enter password. • Connect the device and SoundTouch™ system to the same Wi-Fi® network. • Place the system within range of the router. • Enable Wi-Fi on the device (mobile or computer) you are using for setup . • If network name does not appear or is hidden, select Manually Connect to Another Network on the...
Page 22
22 - English Care and Maintenance Problem What to do Right and left stereo chan- nels are heard on the wrong speakersConfirm speaker wire connections: • Connect speaker wires from the amplifier’s SPEAKERS OUT + L - connector to your left speaker. • Connect speaker wires from the amplifier’s SPEAKERS OUT + R - connector to your right speaker. Bass or treble is weak Check speaker wire connections. Confirm that the individual wir es are connected + to + and – to –. Interference • Firmly...
Page 23
English - 23 Care and Maintenance Limited warranty information Your SoundTouch™ system is covered by a limited warranty. Details of the limited warranty are provided on the quick start guide in the carton. Please refer to the guide for instructions on how to obtain warranty service and register your product. Failure to register will not affect your limited warranty rights. The warranty information provided with this product does not apply in Australia and New Zealand. See our website at...
Page 24
24 - English Appendix A: Connector Panel Connectors Computer setup Terminal connectors Ethernet RCA stereo connectors 3.5 mm connector Connector Description POWERAC power cord connector. Power is applied when the power cord is inserted and plugged into an AC (mains) outlet. There is no on/off switch on the SoundTouch™ amplifier. SETUP USB connector for setup using a computer. Ethernet Ethernet connector enables wired access to your home network. SPEAKERS OUT Two terminal block connectors enable you...
Page 25
English - 25 Appendix B: Wall Mounting Instructions Mounting hardware specifications You can mount the amplifier on a wall with the provided mounting bracket and hardware. WARNING: Do not mount on surfaces that are not sturdy enough, or that have hazards concealed behind them, such as electrical wiring or plum bing. If you are not sure about installing the bracket, contact a qualified professional installer. Ensure the bracket is installed according to local building codes. Item WoodWallboard...
Page 26
26 - English Appendix B: Wall Mounting Instructions Mounting the bracket to the wall Use the provided mounting hardware to secure the provided mounting bracket to the wall. WARNINGS: • Only wall mount the amplifier with the bracket provided with your system. • Do not mount the bracket on the ceiling. CAUTION: Do not place or install the bracket or system near any heat sources, such as fireplaces, radiators, heat registers or other apparatus (including amplifiers) that pr oduce heat. Additionally...
Page 27
English - 27 Appendix B : Wall Mounting Instructions Attaching the amplifier to the mounting bracket You can attach the amplifier to the bracket vertically or horizontally. • Do not mount the amplifier on the ceiling. • Do not mount the amplifier with the connector panel at the bottom. 1. Align the four latches on the back of the amplifier with the bracket’\ s four tabs. Tip: For vertical mounting, the connector panel must be on top. Connector panel 2. Gently push the amplifier down onto the bracket’s...
Page 28
28 - English Appendix C: Using a Computer for Setup Important setup information • You can set up your system using a computer rather than a smartphone or tablet. • Use a computer that is on your Wi-Fi® network. • Use a computer where your music library is stored. • You need the provided USB cable.* • Do not connect the USB cable until the app instructs you to connect the \ cable. * The USB connector on the back of the system is for computer setup only. The USB connector is not designed to charge...