Home > Bosch > Washing Machine > Bosch WVD 24460 User Manual

Bosch WVD 24460 User Manual

Here you can view all the pages of manual Bosch WVD 24460 User Manual. The Bosch manuals for Washing Machine are available online for free. You can easily download all the documents as PDF.

Page 31

31
Washing temperatureYou can change the default washing temperature. 
■Keep touching the temperature button °C Temp. 
until the desired temperature displays. 
²For different clothing, there are different pro-
grammes with respective temperature ranges.
Spin speed You can change the default spin speed. 
■Touch the Í Spin button until desired spin speed 
displays. 
²If setting $ (without final spin) has been selected, 
the washing remains in the final rinsing water. 
Before the laundry can be uploaded,...

Page 32

32
Finish in timeBefore a programme starts, you can specify by how 
many hours later the programme is to be ended. 
Example of Easy-Care 40 °C 
programme: 
■Touch the 5 button, the display shows the 
minimum finish in time of the selected programme. 
Such as 1h, i.e.1 hours. 
²The minimum finish in time of different programmes 
are different. It depends on the duration of selected 
programme. 
■Touch the 5 button until the desired number of 
hours is displayed. 
²The finish in time can be set in 1-hour...

Page 33

33²If the programme sequence is changed by rotating 
the programme selector or the programme is 
cancelled, the preselected finish in time is also 
cancelled. The programme duration of the newly 
selected programme appears in the display. The 
finish in time must be reselected (see also chapter 
Changing the programme, page 36 and 
Cancelling the programme, page 36). 
²The laundry can be topped up at any time during the 
finish in time. Close the washer-dryer door. 
 

Page 34

34
Childproof lock You can secure your washer-dryer to prevent selected 
functions from being inadvertently changed. 
If the childproof lock has been selected: 
– no changes can be made while the programme is 
running, 
– the symbol 
@ flashes if a programme setting is 
inadvertently changed, 
– should the appliance be switched off and on while 
a programme is running, the programme will 
continue at the point at which it was interrupted, 
– when the programme ends, the duration time is 
showed as 0:01,...

Page 35

35
SignalThe acoustic signal indicates:
– that the additional functions (buttons) have been 
switched on or off.
– individual programmes statuses (e.g. start of 
programme, end of programme), operating errors 
and faults.
Start the signal mode
■After setting, run the programme selector to “Off”, 
the volume of signal is stored
* If required,set repeatedly.
1. Set to “Off” 2. One step to right 3. keep selected and
5.release and find the number 
from 0 to 4 4. One step to right
6. One step to right
6....

Page 36

36
During washing/drying 
Changing the 
programmeIf you have accidentally selected the wrong 
programme 
■If the childproof lock is active, temporarily 
deactivate, see page 34. 
■Turn the programme selector to a newly selected 
programme. If required, change other settings. 
■Touch the Start/Pause A button. The programme 
starts. 
■If required, re-activate the childproof lock, see page 
34. 
Cancelling the 
programmeIf you would like to terminate a programme and remove 
the laundry: 
■If the childproof...

Page 37

37
■Open the washer-dryer door. 
■Remove the laundry.
²If a programme was interrupted at a high 
temperature, such as drying programme, please 
do no open the washer-dryer door until the 
appliance has cooled down.
Pausing the 
programme If you would like to pause a runing programme without 
changing the sequence: 
■Touch the Start/Pause A button during washing 
cycle, the display shows PAUS (pause), if door 
open symbol }
 flashes at this moment means the 
door can be opened after 1 minute later, when...

Page 38

38
When the programme has ended 
²Display panel: 
– All symbols on the programme status display have 
gone out, washing temperature, spin speed are 
displayed, 
– The programme duration is shown as -0-, 
– If the childproof lock is selected, the @ symbol is 
lit and the programme duration is shown as 0:01. 
Please deactivate the childproof lock, see page 34 
– If too much detergent was added, the *
 symbol 
illuminates.
²If the dry symbol ˆ
 flashes after the drying process 
has finished and the load is...

Page 39

39
■If required, deactivate the childproof lock. 
■Select an additional programme Drain [, Spin Í; 
or touch the Start/Pause A
 button directly. 
■If required, activate the childproof lock. 
At the end of the additional programme: 
■If required, deactivate the childproof lock. 
■Turn the programme selector to Off. 
Removing the laundry ■Turn off the tap.
■Open the washer-dryer door. 
If the loading door cannot be opened: Wait 2 minutes 
(safety function is active) 
or 
there is still water in the...

Page 40

40
Special applications
Soaking ■Load laundry of the same colour. 
■Pour soaking agent into dispenser II according to 
the manufacturers instructions. 
■Set the programme selector to Cottons and the 
washing temperature 30°C. 
■Touch the Start/Pause A button. The programme 
starts. 
■After approx. 10 minutes, turn the programme 
selector to Off. The laundry is left to lie in the water. 
■Select a programme according to the required 
soaking time, the detergent solution is pumped out. 
²Only little...
Start reading Bosch WVD 24460 User Manual

Related Manuals for Bosch WVD 24460 User Manual

All Bosch manuals