Bosch WAE 24360 User Manual
Have a look at the manual Bosch WAE 24360 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 101 Bosch manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
123456
End of programme when ...
... $ Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select Rinse / Spin.
– Press $Start/ Reload.
Programmes at lower temperatures: – Rinse / Spin (deactivate =Aqua Plus button) or
select >Drain .
– Press $Start/ Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake :
– Reselect the programme.
– Press $Start/ Reload. The new programme starts from
the beginning.
Reloading laundry, if ... a page 5
... $ Start/ Reload selected and then YES is lit in the
display panel. If NO is lit, the washing machine door
cannot be opened.
– Press $Start/ Reload.
Correct installation according to the
separate Installation instructions.
Checking the machine
– Never use a damaged machine.
– Inform customer service.
Connecting the mains plug
Make sure your hands are dry.
Take hold of the plug only.
Turning the tap on
Compartment II : Detergent for the main wash, water
softener, bleach, stain remover
Sorting and loading laundry
Follow the manufacturers care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7 .
Observe the important information a page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal .
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask your water supply
company) and manufacturers instructions.
Pour liquid detergent into the appropriate dispense r and place in the drum.
Your washing machine
Congratulations ä You have opted for a modern, high-quality
domestic appliance manufactured by Bosch. This wash ing machine
is distinguished by its economical water and energy consumption.
Each machine that leaves our factory has been inspe cted thoroughly
to ensure that it functions properly and is in perfect condition.
Further information: www.bosch-home.com
You can find the contact details for your nearest a fter-sales service
here or in the after-sales service directory (depen ding on model).
GB 0844 8928979
Calls from a BT landline will be charged at up to 3 pence per
minute. A call set-up fee of up to 6 pence ma y apply.
IE 01450 2655
Environmentally friendly waste disposal
All packaging must be disposed of in accordance with
environmental guidelines.
This appliance is certified in accordance with Europ ean Directive
2002/96/EEC on waste electrical and electronic equi pment
(WEEE).
This directive provides the framework for the EU-wide collection and
reuse of used appliances.
Intended use
ContentsPage
‹Intended use ...................................... ................................................. 1
‹Programmes ......................................... ............................................... 1‹Setting and adjusting the programme ............... ............................ 3
‹Washing ........................................................................................... 3/4
‹After washing ..................................... ................................................. 4‹Individual settings ............................... ........................................... 5/6
‹Important information ............................. .......................................... 6
‹Overview of programmes ............................. ................................... 7‹Safety instructions ............................................................................. 8
‹Consumption values ................................ ......................................... 8
‹Care ..................................................................................................... 9‹Information on the display panel .................. .................................. 9
‹Maintenance .................................................................................... 10
‹What to do if... .................................................................................. 11
Protection of the environment/Conservation tips– Always fill the washing machine with a maximum amoun t of
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash.
– Instead of LFCottons 90 °C , choose the programme
LF Cottons 60 °C with the additional function EcoPerfect .
Comparable cleaning result with significantly lower energy
consumption.
– Measure the detergent according to the manufacture rs
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select the spin
speed according to the instructions of the dryer ma nufacturer.
Preparation Before washing for the first time
Wash once without any laundry a page 9.
Setting** and adjusting programmes
Spin
speed*Programme selectorStart/
Reload
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
Programmes
Detailed overview of programmes apage 7 .
Spin speed can be selected individually, irrespecti ve of the
selected programme and programme progress.
LF CottonsHard-wearing fabrics
+ PrewashHard-wearing fabrics, pre-wash at
30 °C
/Mixed LoadDifferent types of laundry
@SuperQuick 15’Short programme
2 Rinse/ SpinLaundry washed by hand, = Aqua Plus button activated; if only
using the spin cycle, deactivate the
button
> DrainDrain rinsing water for Rinse Hold
(without final spin)
: / WoolHand/machine-washable wool
“ Delicate/SilkDelicate washable fabrics
I Easy-CareEasy-care fabrics
**If the symbol flashes in the
display panel, the childproof lock
is active a deactivate, page 5.
Additional functions, the options
button and spin speeds a
Individual settings, page 5.
$ Start/Reload
Washing
1
2 Washing
Detergent drawer with
compartments
I, II, ~
Washing machine
door
Compartment 0: Fabric softener, starch
Compartment I : Detergent for pre-wash
‹for domestic use only,
‹for washing machine-washable fabrics and hand-wash-
able wool in detergent solution,
‹to be operated with cold drinking water and commer-
cially available detergents and care products which are
suitable for use in washing machines.
.
– Do not leave children unattended near the washing machine.
– The washing machine is not to be used by children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine.
Read these instructions and the separate
installation instructions before operating the
washing machine.
Dilute viscous fabric softener and fabric condition er with water.
This prevents blockages.
Individual settings
‘Ready in options button
When you select the programme, the relevant program me duration is displayed. You can
delay the start of the programme before it begins. The Ready in- time can be set in
increments of one hour up to a maximum of 24 hours. Press the Ready in button
repeatedly until the required number of hours is di splayed (h = hour). Choose $Start /
Reload. It is not possible to make adjustments once the programme has started.
‘Spin c/ without final spin
Before and while the selected programme is running, you can set the spin speed or Rinse
Hold (without final spin, laundry soaks in the last rins ing water, display - - -). The effects
depend on the programme progress. The maximum selec table spin speed depends on the
model and on which programme is currently selected.
‘Additional functions a and overview of programmes, see page 7
SpeedPerfect For washing in a shorter time with a washing outcom e comparable to
that of the standard programme. Maximum load a Overview of
programmes, page 7.
EcoPerfect For saving energy with a washing performance compar able to that of
the standard programme.
S Reduced Ironing Special spin sequence with subsequent fluffing. Mor e gentle final spin
- residual moisture in the laundry slightly increas ed.
= Aqua Plus Increased water level and additional rinse cycle, exte nded washing
time. For areas with very soft water or for further enhancing the spin
result.
‘Childproof lock and reloading
Childproof lock/
Appliance lock You can lock the washing machine to prevent the fun
ctions you have
set from being changed inadvertently.
ON /OFF : Press and hold the $ Start/Reload button for approx. 5
seconds after the start/end of the programme.
Note: The childproof lock can remain activated until you wish to start
the next programme, even after switching off the ma chine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once t he programme
has started.
YES
Reload If you want to add additional items of laundry after
the programme has
started, choose $ Start/ Reload . The machine checks whether
reloading is possible.
YES is lit: Reloading is possible.
NO flashes: wait until YES lights up.
Note: do not open the door until YES is lit.
NO : It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the $Start/ Reload.
‘$ Start/Reload
To start the programme or to subsequently load addi tional laundry, and to activate/deactivate
the childproof lock.
Individual settings
‘Signal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders , additives and cleaning agents, you
must follow the manufacturers instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry ba g.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choose the addit ional function
SpeedPerfect .
Pre-treat any stains as necessary.
intense Do not load as much laundry. Choose a programme with pre-wash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturers
instructions. Turn the programme selector to LFCottons 30 °C and press $Start/ Reload.
After approx. 10 minutes, press $Start/ Reload to pause the programme. Once the required
soaking time has elapsed, press $Start/ Reload again to continue the programme, or select
a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liq uid starch is used. Pour the starch in
accordance with the manufacturers instructions int o fabric softener compartment ~ (rinse first
if necessary).
Dyeing/Bleaching
Dye should only be used in normal household quantit ies. Salt may damage stainless steel.
Always follow the dye manufacturers instructions! Do not use the washing machine for
bleaching clothes!
2. Setting the volume
for ...
1.Activating the mode
for setting the signal
volume
Set to • 1 step, the
display panel
lights up press and hold
+
1 step, release
Button signals Information signals
Set to •
Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times. 1200
1000
800
600
Rinse Hold
All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run through the
setting options automatically.
Additional
functions
3
Drum
Control panel
Service flap
Programme sequence displays:
ü ü1 üü2 üü Childproof lock, washing, rinsing, spinning
1 - 24h Programme end after
Ready in
Display panel/
Options button
Removing the washing
Open the washing machine door and remove the washin g.
If Rinse Hold (without final spin) is active: Turn the
programme selector to >Drain or select the spin speed.
Press $Start/ Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models a Refer to installation
instructions.
Switching off
Turn the programme selector to Off.
(*depending on the model)
7
Overview of programmes
a Refer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max. Type of laundry
Additional functions; informationLFCottons
30, 40, 60, 90 °C
7 kg/
4 kg*Hard-wearing fabrics, heat-resistant fabrics made of
cotton or linen
SpeedPerfect*, EcoPerfect, S Reduced Ironing,
= Aqua Plus
+ Prewash
40 °C
I Easy-Care
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
SpeedPerfect, EcoPerfect, S Reduced Ironing,
= Aqua Plus
/
Mixed Load
40 °C Fabrics made of cotton or easy-care fabrics
SpeedPerfect, EcoPerfect, S Reduced Ironing,
= Aqua Plus;
different types of laundry can be washed together
“c Delicate/Silk
30 °C
2 kgFor delicate, washable fabrics, e.g. made of silk, s
atin,
synthetic fibres or blended fabrics (e.g. curtains)
SpeedPerfect, EcoPerfect, S Reduced Ironing,
= Aqua Plus;
No spin between rinse cycles
: / Wool
cold, 30 °C Hand
ä or machine-washable fabrics made of wool or
containing wool Particularly gentle wash programme to avoid shrinkage
of laun-
dry, longer programme breaks (fabrics rest in the de tergent
solution)
@ SuperQuick 15’
30 °C Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics Short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Additional
programmes
2
Rinse/ Spin, > Drain
* Reduced load for additional SpeedPerfect function
‘
As a short programme, /Mixed Load 40 °C, with a maximum spin speed, is ideal.Programmes without pre-wash - add detergent to comp artment II, programmes with pre-wash - distribute the detergen t between compartments Iand II.
0711 / 9000660354
*660354*
WAE24367GB ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
– Read the instruction manual and installation instr uctions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Never insert/disconnect the mains plug with damp ha nds.
Danger to lifeFor worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the p lug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking the ir lives.
Danger of suffocation– Keep packaging, film and packaging parts out of th e reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion– Items of laundry pretreated with cleaning agents co ntaining
solvents, e.g. stain remover / cleaning solvent may lead to an
explosion after being loaded into the washing machi ne.
Rinse items of laundry thoroughly by hand beforehan d.
Risk of injury– The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating .
– Be careful when opening the detergent drawer while t he machine
is in operation.
Consumption values depending on model
Programme Load Electricity***Water***Programme
duration***
LF Cottons 30 °C* 7 kg 0,55 kWh 60 l 02:36 h
LFCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36 h
LFCottons 60 °C* 7 kg 1,33 kWh 60 l 02:41 h
LF Cottons 90 °C 7 kg 2,00 kWh 64 l 02:48 h
Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
/ Mixed Load 40 °C 3 kg 0,48 kWh 32 l 01:03 h
“c Delicate/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
:ü/ Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with vali d standard EN60456.
Note on comparative tests: For testing the test program mes, wash the specified load using the maximum spin speed.
Programme Additional function Load Annual energy
consumption Annual water
consumption
LF
Cottons 40/60 °C EcoPerfect** 7/3,5 kg 197 kWh 10560 l
** Programme setting for testing and energy labelling in accordance with EU directive 2010/30/EU with cold wate r (15 ºC).
*** The values deviate from the indicated values depe nding on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, d etergent used, fluctuations in the power supply and selected additional
functions.
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on t he tap. Add the following to compartmentII:
– approx. 1 litre water
– detergent (dosage according to the manufacturers i nstructions for light soiling and the appropriate degree of water
hardness)
Set the programme selector to IEasy-Care 60 °C and select$Start /Reload. At the end of the programme, turn
the programme selector to Off.
Machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleanin g agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immedi ately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener resid ues.
1. Pull out, press insert down, remove draw completely .
2. To remove the insert: press the insert upwards from b elow with your finger.
3. Clean the detergent dispenser tray and insert with w ater and a brush and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not s teel wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler man ufacturers instructions. This should not be necessary if the
correct dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has be en restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If p ossible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can b e seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10 .
3. Pull the emergency release downwards with a tool an d release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16Close the washing machine door properly; laundry ma y be caught.
F: 17Open the tap completely, supply hose kinked or trap ped;
Clean the filter apage 10 , Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergen t solution pump apage 10 . Drainage hose / waste pipe
blocked; Clean the drainage hose at the siphon apage 10 .
F: 21 Motor fault. Call customer services.
F: 23Water in the base tub, appliance leaking. Call customer services.
–Risk of electric shock. Disconnect the mains plug.
– Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Offand disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the retainer and pul l it
from the housing. Remove the container.
Remove the sealing cap, allow the detergent solution to flow out.
Replace the sealing cap and place the drainage hose i n the retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the
detergent solution begins to flow out. When the ser vice flap is half full, close the pump cover
and empty the service flap. Repeat the above steps unt il all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housin g (the impeller in the detergent
solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight int o the drain during the next wash: Pour 1 litre of water into
compartment II and start the >Drain programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainag e hose (residual water).
2. Clean the drainage hose and siphon connecting piece .
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for 2Rinse/ Spin // >Drain ).
3. Choose $Start /Reload. Let the programme run for approximately 40 seco nds.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
–Risk of scalding.
Allow the detergent solution to cool down.
– Turn off the tap.
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.
Detergent not
dispensed. –
$ Start /Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10 .
– Supply hose kinked or trapped?
‘Washing machine door
cannot be opened. – Safety function active. Programme stopped?
apage 4 .
– Is Rinse Hold (without final spin) selected? a page 3, 4.
– Can be opened by emergency release only? a page 9.
‘Programme does not
start. –
$ Start/ Reload or Ready in time selected?
– Washing machine door closed?
– Childproof lock active? Deactivate apage 5 .
‘Detergent solution is
not drained. – Is
Rinse Hold (without final spin) selected? a page 3, 4.
– Clean the detergent solution pump apage 10 .
– Clean the waste pipe and/or drainage hose.
‘Water not visible in the
drum. – Not a fault - water below the visible area.
‘Unsatisfactory spin
result.
Laundry wet/too damp.– Not a fault - the unbalanced-load detection system
has cancelled the
spin cycle because of uneven distribution of the la undry.
Distribute small and large items of laundry evenly in side the drum.
– S Reduced Ironing selected? a page 5.
– Selected speed too low? a page 5 .
‘The programme
duration changes
during the wash cycle. – Not a fault – the programme sequence is optimised
for the particular
wash process. This may result in changes to the pro gramme duration
in the display field.
‘Spin cycle performed
several times. – Not a fault - unbalanced load detection system adj
usts the
imbalance.
‘Residual water in the
compartment for care
products. – Not a fault - the action of the care product is no
t affected.
– Clean the insert if necessary apage 9 .
‘Odour formation in the
washing machine. – Run programme
LFCottons 90 °C without laundry. Use standard
detergent.
‘Status display ³1
flashes. Foam may be
coming out of the
detergent drawer. – Too much detergent used? Mix 1 tablespoon of fabri
c softener with
½ litre of water and pour into dispenser II(not for outdoor and down-
filled textiles!).
– Reduce the detergent dosage for the next wash cycl e.
‘Intense noise
formation, vibrations
and “wandering”
during the spin cycle.– Are the appliance feet fixed?
Secure the appliance feet a Installation instructions .
– Transportation safety devices removed? Remove the transportation
safety devices a Installation instructions .
‘Noises during spin and
drain cycles. – Clean detergent-solution pump
apage 10.
‘Display panel/indicator
lamps do not function
during operation. – Power cut?
– Fuses triggered? Reset/change the fuse.
– If the fault occurs repeatedly, call customer serv
ices.
‘Programme sequence
longer than usual.– Not a fault - unbalanced load detection system adj
usts imbalance by
repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds an additional rinse
cycle.
‘Detergent residues
on the laundry. – Occasionally, phosphate-free detergents contain wa
ter-insoluble
residues.
– Select the 2Rinse / Spin cycle or brush out the laundry after
washing.
If you cannot correct a fault yourself (switching o n/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call customer servic esa Installation instructions.
Washing machine
en Instruction manual
12
$
$
=
>
$
$
a
$
$
Correct installation according to the
separate Installation instructions.
Checking the machine
– Never use a damaged machine.
– Inform customer service.
Connecting the mains plug
Make sure your hands are dry.
Take hold of the plug only.
Turning the tap on
Compartment II
: Detergent for the main wash, water
softener, bleach, stain remover
a
a
Close the washing machine door. Take care not to tr ap
Pour liquid detergent into the appropriate dispense
Your washing machine
Congratulations ä You have opted for a modern, high-quality
domestic appliance manufactured by Bosch. This wash ing machine
is distinguished by its economical water and energy consumption.
Each machine that leaves our factory has been inspe cted thoroughly
to ensure that it functions properly and is in perf ect condition.
Further information: www.bosch-home.com
You can find the contact details for your nearest a fter-sales service
here or in the after-sales service directory (depen ding on model).
GB 0844 8928979
Calls from a BT landline will be charged at u p to 3 pence per
minute. A call set-up fee of up to 6 pence ma y apply.
IE 01450 2655
Environmentally friendly waste disposal
All packaging must be disposed of in accordance wit h
environmental guidelines.
This appliance is certified in accordance with Euro pean Directive
2002/96/EEC on waste electrical and electronic equi pment
(WEEE).
This directive provides the framework for the EU-wi de collection and
reuse of used appliances.
Intended use
ContentsPage
‹Intended use ...................................... ................................................. 1
‹Programmes ......................................... ............................................... 1‹Setting and adjusting the programme ............... ............................ 3
‹Washing ........................................................................................... 3/4
‹After washing ..................................... ................................................. 4‹Individual settings ............................... ........................................... 5/6
‹Important information ............................. .......................................... 6
‹Overview of programmes ............................ .................................... 7‹Safety instructions ............................................................................. 8
‹Consumption values ................................ ......................................... 8
‹Care ..................................................................................................... 9‹Information on the display panel .................. .................................. 9
‹Maintenance .................................................................................... 10
‹What to do if... .................................................................................. 11
Protection of the environment/Conservation tips– Always fill the washing machine with a maximum amo unt of
laundry for the relevant programme.
– Wash normally soiled laundry without a pre-wash.
– Instead of LFCottons 90 °C , choose the programme
LF Cottons 60 °C with the additional function EcoPerfect .
Comparable cleaning result with significantly lower energy
consumption.
– Measure the detergent according to the manufacturer s
instructions and water hardness.
– If the laundry is then dried in the tumble dryer, select the spin
speed according to the instructions of the dryer ma nufacturer.
Preparationa
Spin
speed*Programme selectorStart/
Reload
Programmes
Detailed overview of programmes apage 7 .
Spin speed can be selected individually, irrespecti ve of the
selected programme and programme progress.
LF CottonsHard-wearing fabrics
+ PrewashHard-wearing fabrics, pre-wash at
30 °C
/Mixed LoadDifferent types of laundry
@SuperQuick 15’Short programme
2 Rinse/ SpinLaundry washed by hand, = Aqua Plus button activated; if only
using the spin cycle, deactivate the
button
> DrainDrain rinsing water for Rinse Hold
(without final spin)
: / WoolHand/machine-washable wool
“ Delicate/SilkDelicate washable fabrics
I Easy-CareEasy-care fabrics
a
a
$
~
Compartment 0: Fabric softener, starch
Compartment I : Detergent for pre-wash
‹for domestic use only,
‹for washing machine-washable fabrics and hand-wash-
able wool in detergent solution,
‹to be operated with cold drinking water and commer-
cially available detergents and care products which ar e
suitable for use in washing machines.
.
– Do not leave children unattended near the washing machine.
– The washing machine is not to be used by children or persons not familiar with the
operating instructions.
– Keep pets away from the washing machine.
Read these instructions and the separate
installation instructions before operating the
washing machine.
‘
$
‘ c
‘a
a
S =
‘ $
$
$
‘$
‘
LF $
$ $
~
Additional
functions
Programme sequence displays:
ü ü1 üü2 üü Childproof lock, washing, rinsing, spinning
1 - 24h Programme end after
Ready in
Display panel/
Options button
>
$
a
(*depending on the model)
34
End of programme when ...
... $ Start/Reload flashes and -0- appears on the display
panel.
Interrupting the programme
Programmes at high temperatures:
– Cool washing: Select Rinse / Spin.
– Press $Start/ Reload.
Programmes at lower temperatures: – Rinse / Spin (deactivate =Aqua Plus button) or
select >Drain .
– Press $Start/ Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistak e:
– Reselect the programme.
– Press $Start/ Reload. The new programme starts from
the beginning.
Reloading laundry, if ... a page 5
... $ Start/ Reload selected and then YES is lit in the
display panel. If NO is lit, the washing machine door
cannot be opened.
– Press $Start/ Reload.
Sorting and loading laundry
Follow the manufacturers care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load apage 7 .
Observe the important information a page 6.
Insert large and small items of laundry.
Close the washing machine door. Take care not to tr ap items of laundry
between the washing machine door and the rubber sea l.
Add detergent and care products
Measure accordingly:
Amount of laundry, soiling, water hardness (ask you r water supply
company) and manufacturers instructions.
Pour liquid detergent into the appropriate dispense r and place in the drum.
ä
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹
LF
LF
Before washing for the first time
Wash once without any laundry a page 9.
Setting** and adjusting programmes
Programme selector
Programme selector for
switching the machine on
and off and for selecting
the programme. Can be
turned in either direction.
a
LF / @ 2
=
> : “I
**If the symbol flashes in the
display panel, the childproof lock
is active a deactivate, page 5.
Additional functions, the options
button and spin speeds a
Individual settings, page 5.
$ Start/Reload
Washing
1
2 Washing
Detergent drawer with
compartments
I, II, ~
Washing machine
door
0
‹
‹
‹
Dilute viscous fabric softener and fabric condition er with water.
This prevents blockages.
‘
$
‘ c
‘a
a
S =
‘ $
$
$
‘$
‘
LF $
$ $
~
All buttons are sensitive and need
only to be touched lightly. Press
and hold the options and spin
speed buttons to run through the
setting options automatically.3
Drum
Control panel
Service flap
Programme sequence displays:
ü ü1 üü2 üü
Childproof lock, washing, rinsing, spinning
Programme end after
Removing the washing
Open the washing machine door and remove the washin g.
If Rinse Hold (without final spin) is active: Turn the
programme selector to >Drain or select the spin speed.
Press $Start/ Reload.
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can
evaporate.
Turning the tap off
Not required for Aqua-Stop models a Refer to installation
instructions.
Switching off
Turn the programme selector to Off.
56
$ appears on the display
$
=
>
$
$ Reload. The new programme starts from
a
$
$
a a
ä
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹
LF
LF
a
a
LF / @ 2
=
> : “I
a
a
$
~
0
‹
‹
‹
Individual settings
‘Ready in options button
When you select the programme, the relevant program me duration is displayed. You can
delay the start of the programme before it begins. The Ready in- time can be set in
increments of one hour up to a maximum of 24 hours. Press the Ready in button
repeatedly until the required number of hours is di splayed (h = hour). Choose $Start /
Reload. It is not possible to make adjustments once the programme has started.
‘Spin c/ without final spin
Before and while the selected programme is running, you can set the spin speed or Rinse
Hold (without final spin, laundry soaks in the last rin sing water, display - - -). The effects
depend on the programme progress. The maximum selec table spin speed depends on the
model and on which programme is currently selected.
‘Additional functions a and overview of programmes, see page 7
SpeedPerfect For washing in a shorter time with a washing outcom e comparable to
that of the standard programme. Maximum load a Overview of
programmes, page 7.
EcoPerfect For saving energy with a washing performance compar able to that of
the standard programme.
S Reduced Ironing Special spin sequence with subsequent fluffing. Mor e gentle final spin
- residual moisture in the laundry slightly increas ed.
= Aqua Plus Increased water level and additional rinse cycle, e xtended washing
time. For areas with very soft water or for further enhancing the spin
result.
‘Childproof lock and reloading
Childproof lock/
Appliance lock You can lock the washing machine to prevent the fun
ctions you have
set from being changed inadvertently.
ON /OFF : Press and hold the $ Start/Reload button for approx. 5
seconds after the start/end of the programme.
Note: The childproof lock can remain activated unti l you wish to start
the next programme, even after switching off the ma chine.
Then you can deactivate the childproof lock before the start of the
programme and activate it again as necessary once t he programme
has started.
YES
Reload If you want to add additional items of laundry afte
r the programme has
started, choose $ Start/ Reload . The machine checks whether
reloading is possible.
YES is lit: Reloading is possible.
NO flashes: wait until YES lights up.
Note: do not open the door until YES is lit.
NO : It is not possible to reload.
Note: For safety reasons, the washing machine door remains locked
when the water level and/or temperature is high, or during spinning.
To continue the programme, press the $Start/ Reload.
‘$ Start/Reload
To start the programme or to subsequently load addi tional laundry, and to activate/deactivate
the childproof lock.
Individual settings
‘Signal
Important information
Protecting the laundry and the machine
– When determining the dosage of all washing powders , additives and cleaning agents, you
must follow the manufacturers instructions.
– Empty pockets.
– Look out for metal items (paperclips, etc.).
– Wash delicates in a laundry bag (tights, curtains, underwired bras).
– Fasten zips, do up any buttons.
– Brush sand out of pockets and collars.
– Remove curtain fittings or place in the laundry ba g.
Laundry with varying degrees of soiling
Wash new items of clothing separately.
light Do not pre-wash. If required, choose the addit ional function
SpeedPerfect .
Pre-treat any stains as necessary.
intense Do not load as much laundry. Choose a programme with pre-wash.
Soaking Load laundry of the same colour
Pour soaking agent/detergent into compartment II in accordance with the manufacturers
instructions. Turn the programme selector to LFCottons 30 °C and press $Start/ Reload.
After approx. 10 minutes, press $Start/ Reload to pause the programme. Once the required
soaking time has elapsed, press $Start/ Reload again to continue the programme, or select
a different programme.
Starching Laundry must not be treated with fabric softener
Starching is possible in all wash programmes if liq uid starch is used. Pour the starch in
accordance with the manufacturers instructions int o fabric softener compartment ~ (rinse first
if necessary).
Dyeing/Bleaching
Dye should only be used in normal household quantit ies. Salt may damage stainless steel.
Always follow the dye manufacturers instructions! Do not use the washing machine for
bleaching clothes!
2. Setting the volume
for ...
1.Activating the mode
for setting the signal
volume
Set to
•1 step, the
display panel
lights uppress and hold+1 step, release
Button signals Information signals
Set to
•Setting the
volume*
Setting the
volume*
1 step
direct
* you may need to select
the function several times.
1200
1000
800
600
Rinse Hold
ü ü1 üü2 üü
g.
> or select the spin speed.
$
– Leave the washing machine door and detergent
a Refer to installation
7
Overview of programmes a Refer to the table of consumption values on page 8 and notes on page 6.
Programmes °C max.Type of laundry
Additional functions; informationLFCottons
30, 40, 60, 90 °C
7 kg/
4 kg*Hard-wearing fabrics, heat-resistant fabrics made of
cotton or linen
SpeedPerfect*, EcoPerfect, S Reduced Ironing,
= Aqua Plus
+ Prewash
40 °C
I Easy-Care
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics
SpeedPerfect, EcoPerfect, S Reduced Ironing,
= Aqua Plus
/
Mixed Load
40 °C Fabrics made of cotton or easy-care fabrics
SpeedPerfect, EcoPerfect, S Reduced Ironing,
= Aqua Plus;
different types of laundry can be washed together
“c Delicate/Silk
30 °C
2 kgFor delicate, washable fabrics, e.g. made of silk, sa
tin,
synthetic fibres or blended fabrics (e.g. curtains)
SpeedPerfect, EcoPerfect, S Reduced Ironing,
= Aqua Plus;
No spin between rinse cycles
: / Wool
cold, 30 °C Hand
ä or machine-washable fabrics made of wool or
containing wool Particularly gentle wash programme to avoid shrinkage of
laun-
dry, longer programme breaks (fabrics rest in the de tergent
solution)
@ SuperQuick 15’
30 °C Easy-care fabrics made of cotton, linen, synthetic
fibres or blended fabrics Short programme, approx. 15 minutes,
suitable for lightly soiled laundry
Additional
programmes
2
Rinse/ Spin, > Drain
* Reduced load for additional SpeedPerfect function
‘
As a short programme, /Mixed Load 40 °C, with a maximum spin speed, is ideal.Programmes without pre-wash - add detergent to comp artment II, programmes with pre-wash - distribute the detergen t between compartments Iand II.
0711 / 9000660354*660354*
WAE24367GB ...
Robert Bosch Hausgeräte GmbH
Carl-Wery-Str. 34
81739 München / Deutschland
8
Safety instructions
– Read the instruction manual and installation instr uctions and all other information enclosed
with the washing machine and act accordingly.
– Retain the documents for subsequent use.
Risk of electric shock – Never pull the cable to disconnect the mains plug.
– Never insert/disconnect the mains plug with damp h ands.
Danger to lifeFor worn-out appliances:
– Disconnect the mains plug.
– Sever the mains cable and discard along with the p lug.
– Destroy the lock on the washing machine door. This will prevent
children from locking themselves in and risking the ir lives.
Danger of suffocation– Keep packaging, film and packaging parts out of th e reach of
children.
Risk of poisoning – Keep detergents and care products out of the reach of children.
Risk of explosion– Items of laundry pretreated with cleaning agents c ontaining
solvents, e.g. stain remover / cleaning solvent may lead to an
explosion after being loaded into the washing machi ne.
Rinse items of laundry thoroughly by hand beforehan d.
Risk of injury– The washing machine door can become very hot.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine.
– Do not lean on the open washing machine door.
– Do not reach into the drum if it is still rotating .
– Be careful when opening the detergent drawer while the machine
is in operation.
Consumption values depending on model
Programme Load Electricity***Water***Programme
duration***
LF Cottons 30 °C* 7 kg 0,55 kWh 60 l 02:36 h
LFCottons 40 °C* 7 kg 0,69 kWh 60 l 02:36 h
LFCottons 60 °C* 7 kg 1,33 kWh 60 l 02:41 h
LF Cottons 90 °C 7 kg 2,00 kWh 64 l 02:48 h
Easy-Care 40 °C* 3 kg 0,55 kWh 55 l 01:37 h
/ Mixed Load 40 °C 3 kg 0,48 kWh 32 l 01:03 h
“c Delicate/Silk 30 °C 2 kg 0,21 kWh 31 l 00:41 h
:ü/ Wool 30 °C 2 kg 0,19 kWh 39 l 00:40 h
* Programme setting for testing in accordance with va lid standard EN60456.
Note on comparative tests: For testing the test programm es, wash the specified load using the maximum spin speed.
Programme Additional function Load Annual energy
consumption Annual water
consumption
LF
Cottons 40/60 °C EcoPerfect** 7/3,5 kg 197 kWh 10560 l
** Programme setting for testing and energy labelling in a ccordance with EU directive 2010/30/EU with cold water ( 15 ºC).
*** The values deviate from the indicated values depe nding on water pressure, hardness, and inlet temperature, ambient tem-
perature, type, amount and soiling of the laundry, de tergent used, fluctuations in the power supply and se lected additional
functions.
I $
a
a
a
a
>
2 >
$
‘
‘$
a
‘a
a a
‘$
a
‘a
a
‘
‘
S a
a
‘
‘
‘a
‘LF
‘³ 1
‘a
a
‘a
‘
‘
‘2
a
a
LF S
=
I
S
=/
S
=
“c
S
=
: ä
@ 2 >
‘
/
LF
LF
LF
LF /
“c: ü
LF
9
Care
Before washing for the first time
Do not load any laundry into the machine. Turn on th e tap. Add the following to compartmentII:
– approx. 1 litre water
– detergent (dosage according to the manufacturers i nstructions for light soiling and the appropriate degree of water
hardness)
Set the programme selector to IEasy-Care 60 °C and select$Start /Reload. At the end of the programme, turn
the programme selector to Off.
Machine housing, control panel
– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
– Remove detergent and cleaning agent residue immedi ately.
– Do not clean with a jet of water.
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener resid ues.
1. Pull out, press insert down, remove draw completely .
2. To remove the insert: press the insert upwards from b elow with your finger.
3. Clean the detergent dispenser tray and insert with wa ter and a brush and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer.
Leave the detergent drawer open so that any residual water can evaporate.
Drum
Leave the washing machine door open so that the drum can dry out.
Rust stains - use chlorine-free cleaning agent, not ste el wool.
Descaling Ensure there is no laundry in the machine
Descale the appliance according to the descaler manuf acturers instructions. This should not be necessary if the
correct dosage of detergent is used.
Emergency release, e.g. in the event of a power cut
The programme continues to run when the power has be en restored. However, if the laundry has to be removed, the
washing machine door can be opened as follows:
Risk of scalding.
The detergent solution and laundry may be hot. If p ossible, leave it to cool down.
Do not reach into the drum if it is still rotating.
Do not open the washing machine door if water can b e seen through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
2. Drain the detergent solution apage 10 .
3. Pull the emergency release downwards with a tool and release.
Washing machine door can then be opened.
Information on the display panel depending on model
F: 16Close the washing machine door properly; laundry ma y be caught.
F: 17Open the tap completely, supply hose kinked or trap ped;
Clean the filter apage 10 , Water pressure too low.
F: 18 Detergent solution pump blocked; Clean the detergent solution pump apage 10 . Drainage hose / waste pipe
blocked; Clean the drainage hose at the siphon apage 10 .
F: 21 Motor fault. Call customer services.
F: 23Water in the base tub, appliance leaking. Call customer ser vices.
–Risk of electric shock. Disconnect the mains plug.
– Risk of explosion. No solvents.
10
Maintenance
Detergent solution pump
Turn the programme selector to Offand disconnect the mains plug.
1. Open and remove the service flap.
2. For models with a drainage hose: Remove the drainage hose from the retainer and pul l it
from the housing. Remove the container.
Remove the sealing cap, allow the detergent solutio n to flow out.
Replace the sealing cap and place the drainage hose in th e retainer.
2* For models without a drainage hose: Carefully unscrew the pump cover until the
detergent solution begins to flow out. When the serv ice flap is half full, close the pump cover
and empty the service flap. Repeat the above steps unt il all the detergent solution has
completely drained out.
3. Carefully unscrew the pump cover (residual water).
4. Clean the interior, pump cover thread and pump housing (the impeller in the detergent
solution pump must rotate).
5. Replace the pump cover and screw it tightly.
6. Place the service flap back on and close.
To prevent unused detergent from flowing straight into the drain during the next wash: Pour 1 litre of water into
compartment II and start the >Drain programme.
Drainage hose at the siphon
Turn the programme selector to Off and disconnect the mains plug.
1. Loosen the hose clamp, carefully remove the drainage hose (residual water).
2. Clean the drainage hose and siphon connecting piece.
3. Reattach the drainage hose and secure the connection with the hose clamp.
Filter in the water supply
Risk of electric shock!
Do not immerse the HydroSafe safety device in water (contains an electric valve).
Reduce the water pressure in the supply hose:
1. Turn off the tap.
2. Select any programme (except for 2Rinse/ Spin // >Drain ).
3. Choose $Start /Reload. Let the programme run for approximately 40 second s.
4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
1. Depending on model:
Disconnect the hose from the tap.
Clean the filter using a small brush.
and/or for Standard and Aqua-Secure models:
Remove the hose on the rear of the appliance,
Remove the filter with pliers and clean.
2. Connect the hose and check for leaks.
–Risk of scalding.
Allow the detergent solution to cool down.
– Turn off the tap.
‘
‘$
a
‘a
a a
‘$
a
‘a
a
‘
‘
S a
a
‘
‘
‘a
‘LF
‘³ 1
‘a
a
‘a
‘
‘
‘2
a
a
LF S
=
I
S
=/
S
=
“c
S
=
: ä
@ 2 >
‘
/
LF
LF
LF
LF /
“c: ü
LF
I $
a
a
a
a
>
2 >
$
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.
Detergent not
dispensed. –
$ Start /Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter apage 10 .
– Supply hose kinked or trapped?
‘Washing machine door
cannot be opened. – Safety function active. Programme stopped?
apage 4 .
– Is Rinse Hold (without final spin) selected? a page 3, 4.
– Can be opened by emergency release only? a page 9.
‘Programme does not
start. –
$ Start/ Reload or Ready in time selected?
– Washing machine door closed?
– Childproof lock active? Deactivate apage 5 .
‘Detergent solution is
not drained. – Is
Rinse Hold (without final spin) selected? a page 3, 4.
– Clean the detergent solution pump apage 10 .
– Clean the waste pipe and/or drainage hose.
‘Water not visible in the
drum. – Not a fault - water below the visible area.
‘Unsatisfactory spin
result.
Laundry wet/too damp.– Not a fault - the unbalanced-load detection system
has cancelled the
spin cycle because of uneven distribution of the la undry.
Distribute small and large items of laundry evenly inside the drum.
– S Reduced Ironing selected? a page 5.
– Selected speed too low? a page 5 .
‘The programme
duration changes
during the wash cycle. – Not a fault – the programme sequence is optimised
for the particular
wash process. This may result in changes to the pro gramme duration
in the display field.
‘Spin cycle performed
several times. – Not a fault - unbalanced load detection system adj
usts the
imbalance.
‘Residual water in the
compartment for care
products. – Not a fault - the action of the care product is no
t affected.
– Clean the insert if necessary apage 9 .
‘Odour formation in the
washing machine. – Run programme
LFCottons 90 °C without laundry. Use standard
detergent.
‘Status display ³1
flashes. Foam may be
coming out of the
detergent drawer. – Too much detergent used? Mix 1 tablespoon of fabri
c softener with
½ litre of water and pour into dispenser II(not for outdoor and down-
filled textiles!).
– Reduce the detergent dosage for the next wash cycl e.
‘Intense noise
formation, vibrations
and “wandering”
during the spin cycle.– Are the appliance feet fixed?
Secure the appliance feet a Installation instructions .
– Transportation safety devices removed? Remove the transportation
safety devices a Installation instructions .
‘Noises during spin and
drain cycles. – Clean detergent-solution pump
apage 10.
‘Display panel/indicator
lamps do not function
during operation. – Power cut?
– Fuses triggered? Reset/change the fuse.
– If the fault occurs repeatedly, call customer serv
ices.
‘Programme sequence
longer than usual.– Not a fault - unbalanced load detection system adj
usts imbalance by
repeatedly distributing the laundry.
– Not a fault - foam detection system active - adds an additional rinse
cycle.
‘Detergent residues
on the laundry. – Occasionally, phosphate-free detergents contain wa
ter-insoluble
residues.
– Select the 2Rinse / Spin cycle or brush out the laundry after
washing.
If you cannot correct a fault yourself (switching o n/off) or a repair is required:
– Turn the programme selector to Off and remove the mains plug from the socket.
– Turn off the water supply and call customer servic esa Installation instructions.
Washing machine
en Instruction manual