Bosch WAE 24360 User Manual

123456
End of programme when ...
... $  Start/Reload flashes and  -0- appears on the display 
panel.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  Rinse /	  Spin.
– Press  $Start/ Reload.
Programmes at lower temperatures: –   Rinse /	 Spin  (deactivate  =Aqua Plus  button) or 
select  >Drain .
– Press  $Start/ Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistake :
– Reselect the programme. 
– Press  $Start/ Reload. The new...

7
Overview of programmes 
a Refer to the table of consumption values on page 8  and notes on page 6.    
Programmes °C max. Type of laundry
Additional functions; informationLFCottons
30, 40, 60, 90 °C
7 kg/ 
4 kg*Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen

	
 SpeedPerfect*,  
 EcoPerfect,  S Reduced Ironing, 
=  Aqua Plus
+ Prewash
40 °C
I Easy-Care
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics

	
 SpeedPerfect,  
...

12
$
 	
$
 	 =
>
$
$
a
$
$
Correct installation according to the  
separate Installation instructions.
Checking the machine
– Never use a damaged machine. 
– Inform customer service.
Connecting the mains plug
Make sure your hands are dry.  
Take hold of the plug only.
Turning the tap on
Compartment II
: Detergent for the main wash, water
softener, bleach, stain remover
a
a
Close the washing machine door. Take care not to tr ap
Pour liquid detergent into the appropriate dispense
Your washing machine...

34
End of programme when ...
... $  Start/Reload flashes and  -0- appears on the display 
panel.
Interrupting the programme
Programmes at high temperatures: 
– Cool washing: Select  Rinse /	  Spin.
– Press  $Start/ Reload.
Programmes at lower temperatures: –   Rinse /	 Spin  (deactivate  =Aqua Plus  button) or 
select  >Drain .
– Press  $Start/ Reload.
Changing the programme, if ...
... you have selected the wrong programme by mistak e:
– Reselect the programme. 
– Press  $Start/ Reload. The new...

56
$ appears on the display 
 	
$
 	 =
>
$
$ Reload. The new programme starts from 
a
$
$
a a
ä

‹
‹‹
‹
‹‹
‹
‹‹
‹
‹‹
‹
‹
LF
LF 

a
a
LF / @ 2 	
=
> : “I
 a
a
$
~
0
‹
‹
‹
Individual settings
‘Ready in  options button
When you select the programme, the relevant program me duration is displayed. You can 
delay the start of the programme before it begins.  The Ready in- time can be set in 
increments of one hour up to a maximum of 24 hours.  Press the Ready in  button 
repeatedly...

7
Overview of programmes a Refer to the table of consumption values on page 8  and notes on page 6.
    
Programmes °C max.Type of laundry
Additional functions; informationLFCottons
30, 40, 60, 90 °C
7 kg/ 
4 kg*Hard-wearing fabrics, heat-resistant fabrics made of  
cotton or linen

	
 SpeedPerfect*,  
 EcoPerfect,  S Reduced Ironing, 
=  Aqua Plus
+ Prewash
40 °C
I Easy-Care
30, 40, 60 °C
3 kgEasy-care fabrics made of cotton, linen, synthetic  
fibres or blended fabrics

	
 SpeedPerfect,  
...

a
LF
	 
S
=
I 
	 

S
=/

	 
 S
=
“c 
	 

S
=
: ä
@ 2	>

	
‘
/
LF 
LF
LF  
LF  /
“c: ü
LF  

9
Care          
Before washing for the first time
Do not load any laundry into the machine. Turn on th e tap. Add the following to compartmentII:
– approx. 1 litre water  
– detergent (dosage according to the manufacturers i nstructions for light soiling and the appropriate degree of water 
hardness)
Set the programme selector to IEasy-Care 60 °C and select$Start /Reload. At the end of the...

a
LF
	 
S
=
I 
	 

S
=/

	 
 S
=
“c 
	 

S
=
: ä
@ 2	>

	
‘
/
LF 
LF
LF  
LF  /
“c: ü
LF  

I $
a
a
a
a
>
2 	>
$
11
What to do if ...
‘Water is leaking out. – Attach/replace the drainage h ose correctly.
– Tighten the screw connection of the supply hose.
‘No water supply.  
Detergent not  
dispensed. –
$ Start /Reload not selected?
– Tap not turned on?
– Filter blocked? Clean the filter  apage 10 .
– Supply hose kinked or trapped?
‘Washing machine door  
cannot be opened. – Safety...