Bosch Rotak 32 R Manual

Robert Bosch GmbH
Power Tools Division
70764 Leinfelden-Echterdingen
GERMANY
www.bosch-garden.com
F 016 L81 164 (2014.11) O / 12 XXX  
Rotak 32enOriginal instructions
OBJ_DOKU-24112-005.fm  Page 1  Wednesday, November 19, 2014  2:32 PM 

2 | English 
F 016 L81 164 | (19.11.14)Bosch Power Tools
English
Safety Notes
Warning! Read these instructions 
carefully, be familiar with the con-
trols and the proper use of the ma-
chine. Please keep the instructions 
safe for later use!
Explanation of symbols
General hazard safety alert.
Read instruction manual.
Pay attention that bystanders 
are not injured through foreign 
objects thrown from the ma-
chine.
Warning: Keep a safe distance 
from the machine when operat-
ing.
Caution: Do not touch...

 English | 3
Bosch Power ToolsF 016 L81 164 | (19.11.14)
Do not operate the machine when 
barefoot or wearing open sandals, al-
ways wear substantial footwear and 
long trousers.
Thoroughly inspect the area where 
the machine is to be used and remove 
all stones, sticks, wires, bones and 
other foreign objects.
Before using, always visually inspect 
to see that the blades, blade bolts 
and cutter assembly are not worn or 
damaged. Replace worn or damaged 
blades and bolts in sets to preserve...

4 | English 
F 016 L81 164 | (19.11.14)Bosch Power Tools
Remove the plug from the socket:
– Whenever you leave the machine.
– before clearing a blockage,
– before checking, cleaning or working 
on the machine,
– after striking a foreign object. Inspect 
the machine for damage and make re-
pairs as necessary,
– if the machine starts to vibrate abnor-
mally (check immediately).
Connecting to the mains
The voltage indicated on the rating 
plate must correspond to the voltage 
of the power source.
We...

 English | 5
Bosch Power ToolsF 016 L81 164 | (19.11.14)
If in doubt contact a qualified electri-
cian or the nearest Bosch Service Cen-
tre.
WARNING! Inadequate extension 
cables can be dangerous. Exten-
sion cable, plug and socket must be 
of watertight construction and in-
tended for outdoor use.
Cable connections should be kept dry 
and off the ground.
It is recommended for increased elec-
trical safety to use a Residual Current 
Device (RCD) with a tripping current of 
not more than 30 mA. Always...

6 | English 
F 016 L81 164 | (19.11.14)Bosch Power Tools
Intended Use
The garden product is intended for domestic lawnmowing.
Technical Data
Noise/Vibration Information
Sound emission values determined according to 
EN 60335-2-77.
Typically the A-weighted noise levels of the product are: 
Sound pressure level 79 dB(A); sound power level 93 dB (A). 
Uncertainty K = 1 dB.
Vibration total values a
h (triax vector sum) and uncertainty K 
determined according to EN 60335:
a
h

 English | 7
Bosch Power ToolsF 016 L81 164 | (19.11.14)
Troubleshooting
After-sales Service and Application 
Service
www.bosch-garden.com
In all correspondence and spare parts orders, please always 
include the 10-digit article number given on the type plate of 
the garden product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange 
the collection of a product in need of servicing or...

8 | English 
F 016 L81 164 | (19.11.14)Bosch Power Tools
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Gauteng – BSC Service Centre
35 Roper Street, New Centre...

  | 9
Bosch Power ToolsF 016 L81 164 | (19.11.14)
STOP
CLICK!
1
2
3
7,0 kg
1x
1x
1x 2x 2x 2x
OBJ_BUCH-1349-005.book  Page 9  Wednesday, November 19, 2014  2:33 PM 

F 016 L81 164 | (19.11.14)Bosch Power Tools
10 |  
1 2
460 
mm
40  mm
20  mm
5
OBJ_BUCH-1349-005.book  Page 10  Wednesday, November 19, 2014  2:33 PM