Bosch Pll 5 Manual

 English | 25
Bosch Power Tools1 609 929 W57 | (14.7.10)
Assembly
Inserting/Replacing the Battery 
(see figure A)
Alkali-manganese batteries are recommended for the 
measuring tool.
To open the battery lid  11, press the latch 10 in the di-
rection of the arrow and remove the battery lid.
Place the battery-recovery ribbon under the first bat-
tery being inserted. Insert  the supplied batteries in the 
sequence shown in the figure , paying attention to the 
correct polarity.
Always replace all batteries...

1 609 929 W57 | (14.7.10)Bosch Power Tools
26 | English 
Operation
Initial Operation
f Protect the measuring tool  against moisture and 
direct sun light.
f Do not subject the measuring tool to extreme tem-
peratures or variations in temperature.  As an ex-
ample, do not leave it in vehicles for longer periods. 
In case of large variations in temperature, allow the 
measuring tool to adjust  to the ambient tempera-
ture before putting it into operation.
f Avoid heavy impact to or falling down of the...

 English | 27
Bosch Power Tools1 609 929 W57 | (14.7.10)
Measuring Functions
Note: The specified levelling accuracy applies for the 
alignment of the laser beam wi th reference to the spirit 
levels  6 and 7.
Positioning the Measuring Tool (see figure B)
For precise alignment with the  spirit levels, the posi-
tion of the measuring tool is important.
The specified levelling accuracy  is only achieved when 
the measuring tool is  correctly positioned:
– For horizontal alignment with the spirit level  7,...

1 609 929 W57 | (14.7.10)Bosch Power Tools
28 | English 
Vertical Alignment  (see figure D): Position the meas-
uring tool with the three supporting points  12 against 
the wall or with help of the magnets  14, fasten it to the 
wall holder  1 or to another magnetic surface. The exit 
opening for the laser beam  9 must face upward. Align 
the measuring tool vertically  with help of the spirit level 
6 . Top and bottom cabinets, as an example, can be 
aligned alongside the vertical laser line.
Alignment...

 English | 29
Bosch Power Tools1 609 929 W57 | (14.7.10)
Working Advice
fKeep the adhesive tape stri ps 4 out of the reach of 
small children.  Children could mistake the strips 
with chewing gum.
Mounting to a Wall
Four fastening methods are  available for fastening the 
wall holder to different surfaces:
– Fastening with Adhesive Tape Strips  
(see figure G): With the re movable adhesive tape 
strips  4, the wall holder can be fastened to sensitive 
or delicate sturctural  materials without causing...

1 609 929 W57 | (14.7.10)Bosch Power Tools
30 | English 
– Fastening with a Screw : Place the wall holder 1 via 
the opening on the back side onto a screw that 
projects lightly out of the wall.
– Fastening with Adhesive Tape  (see figure I): The 
wall holder can also be fa stened with commercially 
available adhesive tape (not included in the delivery 
scope) as shown in the figure.
For all four fastening metho ds, pay attention that the 
wall holder  1 is fastened securely to the structural sur-
face....

 English | 31
Bosch Power Tools1 609 929 W57 | (14.7.10)
If the measuring tool should fail despite the care taken 
in manufacturing and testing  procedures, repair should 
be carried out by an author ised after-sales service cen-
tre for Bosch power tools. Do  not open the measuring 
tool yourself.
In all correspondence and  spare parts orders, please 
always include the 10-digit article number given on the 
type plate of the measuring tool.
After-sales Service and Customer Assistance
Our after-sales...

1 609 929 W57 | (14.7.10)Bosch Power Tools
32 | English 
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:...

 English | 33
Bosch Power Tools1 609 929 W57 | (14.7.10)
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park...

1 609 929 W57 | (14.7.10)Bosch Power Tools
34 | English 
People’s Republic of China
Website: www.bosch-pt.com.cn
China Mainland
Bosch Power Tools (China) Co., Ltd.
567, Bin Kang Road
Bin Jiang District 310052
Hangzhou, P. R. China
Service Hotline: 800 8 20 84 84
Tel.: +86 (571) 87 77 43 38
Fax: +86 (571) 87 77 45 02
HK and Macau Special Administrative Regions
Robert Bosch Hong Kong Co. Ltd.
21st Floor, 625 King’s Road
North Point, Hong Kong
Customer Service Hotline: +852 (21) 02 02 35
Fax: +852 (25) 90...