Bosch Gcm 10 J Manual

							 English | 39
Bosch Power Tools 1 609 929 W04 | (11/2/10)
In case the angle indicator 41 is not in a line with 
the 0 °  mark of the scale  44 after the adjust-
ment, loosen the screw  45 using a commercial 
Phillips screwdriver and align the angle indica-
tor along the 0 °  mark.
Setting the Standard Bevel Angle 45 °  
(Vertical)
– Bring the power tool into the working posi- tion.
– Turn the saw table  6 until it engages at 0 ° .
– Loosen the clamping lever 19 and tilt the tool  arm leftward to the stop (45 ° ) by the handle 
2.
Checking:  (see figure R1)
– Set an angle gauge to 45 °  and place it on the  saw table 6 .
The leg of the angle gauge must be flush with 
the saw blade  36 over the complete length.
Adjusting:  (see figure R2)
– Loosen the lock nut of the stop screw  18 us-
ing a commercial box-end or open-end span-
ner (size 13 mm).
– Screw the stop screw in or out until the leg  of the angle gauge is flush with the saw blade 
over the complete length.
– Retighten the clamping lever  19 again.
– Afterwards, retighten the lock nut of the stop  screw  18 again.
In case the angle indicator  41 is not in a line with 
the 45 °  mark of the scale  44, firstly check the 0 °  
setting for the bevel angle and the angle indica-
tor again. Then repeat the adjustment of the 45 °  
bevel angle.Transport
Before transporting the power tool, the follow-
ing steps must be carried out:
– Bring the machine into the transport posi- tion.
– Remove all accessories that cannot be  mounted firmly to the power tool.
If possible, place unused saw blades in an 
enclosed container for transport.
– Carry the machine by the transport handle  23 
or hold it by the recessed grips  15 on the 
sides of the saw table.
f When transporting the power tool, use only 
the transport devices and never use the 
protective devices.
Maintenance and Service
Maintenance and Cleaning
fBefore any work on the machine itself, pull 
the mains plug.
If the machine should fail despite the care taken 
in manufacturing and testing procedures, repair 
should be carried out by an after-sales service 
centre for Bosch power tools.
In all correspondence and spare parts order, 
please always include the 10-digit article 
number given on the type plate of the machine.
Cleaning
For safe and proper working, always keep the 
power tool and its ventilation slots clean.
The retracting blade guard must always be able 
to move freely and retr act automatically. There-
fore, always keep the area around the retracting 
blade guard clean.
Remove dust and chips  after each working pro-
cedure by blowing out with compressed air or 
with a brush.
Clean the roller 20 regularly.
OBJ_BUCH-1156-001.book  Page 39  Thur sday, February 11, 2010  12:08 PM 
						

							40 | English 
1 609 929 W04 | (11/2/10)Bosch Power Tools
Accessories
Extension bars . . . . . . . . . . . . . .  2 607 001 978
Extraction adapter . . . . . . . . . . .  1 609 203 V36
Saw blades for wood and plate materials, pan-
els and strips/mouldings
Saw blade 254 x 30 mm, 
40 teeth . . . . . . . . . . . . . . . . . . . 2 608 640 438
Saw blades for hardwood, composite materi-
als, plastic and non-ferrous metals
Saw blade 254 x 30 mm, 
96 teeth . . . . . . . . . . . . . . . . . . . 2 608 640 451
After-sales Service and Customer As-
sistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your 
product as well as spare parts. Exploded views 
and information on spare parts can also be 
found under:
www.bosch-pt.com
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
sories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: [email protected]
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: +27 (011) 6 51 96 00
Gauteng – BSC Service Centre
35 Roper Street, New Centre
Johannesburg
Tel.: +27 (011) 4 93 93 75
Fax: +27 (011) 4 93 01 26
E-Mail: [email protected]
KZN – BSC Service Centre
Unit E, Almar Centre
143 Crompton Street
Pinetown
Tel.: +27 (031) 7 01 21 20
Fax: +27 (031) 7 01 24 46
E-Mail: [email protected]
Western Cape – BSC Service Centre
Democracy Way, Prosperity Park
Milnerton
Tel.: +27 (021) 5 51 25 77
Fax: +27 (021) 5 51 32 23
E-Mail: [email protected]
Bosch Headquarters
Midrand, Gauteng
Tel.: +27 (011) 6 51 96 00
Fax: +27 (011) 6 51 98 80
E-Mail: [email protected]
OBJ_BUCH-1156-001.book  Page 40  Thur
sday, February 11, 2010  12:08 PM 
						

							 English | 41
Bosch Power Tools 1 609 929 W04 | (11/2/10)
Disposal
The machine, accessories and packaging should 
be sorted for environmental-friendly recycling.
The plastic components are labelled for catego-
rized recycling.
Only for EC countries:
Do not dispose of power tools in-
to household waste!
According the European Guideline 
2002/96/EC for Waste Electrical 
and Electronic Equipment and its 
implementation into national 
right, power tools that are no longer usable 
must be collected separately and disposed of in 
an environmentally correct manner.
Subject to change without notice.
OBJ_BUCH-1156-001.book  Page 41  Thur sday, February 11, 2010  12:08 PM