Bosch Dhi 655 F Manual

DHI 645 F / DHI 655 F
a
Internet: http://www.bosch-hausgeraete.de
Bosch Info-Team: de Tel. 01 80/5 30 40 50 (E0,12/Min. DTAG)
de Gebrauchs- und
Montageanleitung
en Operating and
installation instructions
fr Mode d’emploi et
notice de montage
nl Gebruiksaanwijzing en
montagevoorschrift
it Istruzioni d’uso
e per il montaggio
esInstrucciones de uso
y de montaje
pt Instruções de serviçio
e de montagem 

2
Abb. 1
GAS ELEKTRO
GAZ ELECTR.
KAASU ELETT.
GASS EL.
deSeite03–15
enpage 16 – 28
frpage 29 – 41
nlpagina 42 – 54
itpagina 55 – 67
espágina 68 – 80
ptpágina 81 – 93 

16
Operating modes
This can be achieved if the combustion air
is able to flow through non-lockable 
openings, e.g. in doors, windows and in
conjunction with an air supply/air-intake wall
box or by other technical procedures such
as reciprocal interlocking.
If the air intake is inadequate, there is a
risk of poisoning from combustion gases
which are drawn back into the room.
An air-intake/exhaust-air wall box by itself is
no guarantee that the limiting value will not
be exceeded.
Note: When assessing the...

17
Before using for the first time
Important notes:
❑The Instructions for Use apply to several
versions of this appliance. Accordingly,
you may find descriptions of individual
features that do not apply to your 
specific appliance.
❑This extractor hood complies with all 
relevant safety regulations.
Repairsshould be carried out by 
qualified technicians only.
Improper repairs may put the user at
considerable risk.

Do not flambé food directly under the
extractor hood.
Risk of grease filter catching fire due
!to...

18
Operating the extractor hood

Cooking vapours are best eliminated
by:
❑
Switching on the extractor hood when
you start cooking.
❑
Only switching off the extractor hood
a few minutes after you have finished
cooking.
Fan on / offLight 
on  /  off
Intensive setting
Fan settings
Fan on / off
Intensive settingReset button with
saturation display
for grease filter
Fan settings
Light 
on  /  off
Switching off:
The extractor hood can be switched off in
various ways.
Switch-off 1:
❑
Sliding switch to 0 – switch...

19
4.Clean the filters.
5.Insert the clean filters back into the hood.
6. Cancel the  in the display.
❑Press the  button.
Grease filters:
Metal-mesh filters are used to trap the
grease particles in the cooking vapours.
The filter mats are made from non-
combustible metal.
Caution:
As the filter becomes more and more 
saturated with grease, there is an increased
risk of fire and the function of the extractor
hood may be impaired.
Important:
Clean the metal-mesh grease filters at 
regular intervals to prevent the...

20
3.Engage the catches at both sides.
4.Insert the metal-mesh grease filters (see
”Removing and inserting the metal-mesh
grease filters”).
Removing the filter:
Warning: The halogen bulbs must be 
switched off and cool.
1.Remove the metal-mesh filters.
2.Depress the catches on both sides of
the filter and remove the activated 
carbon filter.
3. Replacing the activated carbon filter:
❑A replacement filter can be obtained
from any authorized dealer 
(see optional accessories).
❑Use original filters only.
This will...

21
Cleaning and care
Isolate the extractor hood by pulling out
the mains plug or switching off the fuse.
❑When cleaning the grease filters, remove
grease deposits from accessible parts of
the housing. This prevents the risk of fire
and ensures that the extractor hood
continues operating at maximum 
efficiency.
❑Clean the extractor hood with a hot soap
solution or a mild window cleaner.
❑Do not scrape off dried-on dirt but wipe
off with a damp cloth.
❑Do not use scouring agents or abrasive
sponges.
❑Note:...

22
Important information Installation Instructions:

The installation of the extractor hood
above gas cooking devices, at a
minimum height of650 mm – Fig. 1 – is
permitted provided that the following 
nominal heat loads (Hs) are not exceeded:
❑
Gas cookers
Load of one hotplatemax. 03.0 kW
Load of all hotplates          max. 08.3 kW
Load of the oven               max. 03.9 kW
❑
Gas hobs
Load of one hotplatemax. 03.9 kW
Load of all hotplates          max. 11.3 kW
❑
Gas ceramic hotplate
The nominal heat...

23
Prior to installation
Exhaust-air mode
The exhaust air is discharged upwards
through a ventilation shaft or directly
through the outside wall into the open.
DExhaust air must not be discharged via
a smoke or exhaust gas flue which is 
already in use or via a shaft which is used
for ventilating rooms in which fireplaces are
located.
Discharge exhaust air in accordance
with official and statutory regulations
(e.g. national building regulations).
Discharge of air into smoke or exhaust air
flues which are...