Black and Decker MINI FOOD PROCESSORGRINDER CG700 User Manual


Model 
Modelo
❑	CG700
USA/Canada	 1-800-231-9786
Mexico	 01-800-714-2503
www.prodprotect.com/applica
Accessories/Parts	(USA/Canada)
Accesorios/Partes	(EE.UU/Canadá)
1-800-738-0245
Please	 Read	and	Save	 this	Use	 and	Care	 Book
Por	favor	 lea	este	 instructivo	 antes	de	usar	 el	producto
™
†
U N D E R - T H E - C A B I N E T 
MINI  FOOD  PROCESSOR  / 
GRINDER
MINI  PROCESADOR  /  MOLINO
PARA  INSTALAR DEBAJO  DEL  GABINETE
Register your product online at www.prodprotect.com/applica, for a chance...




IMPORTANT	SAFEGUARDS
 When using electrical appliances, basic safety precautions should 
always be followed, including the following:
❑ Read all instructions.
❑ To protect against risk of electrical shock do not put cord, plugs or 
appliance in water or other liquid.
❑ Close supervision is necessary when any appliance is used by or 
near children.
❑ Unplug from outlet when not in use, before putting on or taking 
off parts, and before cleaning.
❑ Avoid contacting moving parts.
❑ Do not...




Product	may	vary	 slightly	 from	what	 is	illustrated.POLARIZED 	PLUG 	(  0V 	Models 	Only)
This appliance has a polarized plug (one blade is wider than the other). To 
reduce the risk of electric shock, this plug is intended to fit into a polarized 
outlet only one way. If the plug does not fit fully into the outlet, reverse the 
plug. If it still does not fit, contact a qualified electrician. Do not attempt to 
modify the plug in any way.
TAMPER-RESISTANT	 SCREW
Warning:	This...

6
7

GETTING	STARTED	
• Remove all packing material, labels and any stickers.
• Remove and save literature.
• Unpack mounting parts and set them aside in a safe place where they will not 
roll away or get lost.
Important:	 Do	not	 attempt	 to	operate	 appliance	 until	it	is	 properly	 installed.
CHOOSE	 A	LOCATION
When choosing your location, consider the following:
• DO make sure to mount within reach of an electrical outlet.
• DO consider your normal work patterns in the kitchen when choosing...

8
9

5. Drilling from under the cabinet up, drill holes through the 4 places marked on 
the template, using a ¼-inch drill bit (E).
Important:	 Always	ensure	you	are	drilling	 straight	 up	through	 the	marked	
mounting	 holes	on	the	 template.	 Drilling	at	an	 angle	 may	prevent	 proper	
installation	 and	may	 damage	 cabinets	 if	the	 drill	 bit	pierces	 the	partition.
  6. Once holes are drilled, remove tape and mounting template.
  7. Wipe dust and debris off the topside and underside of the cabinet...

0


Important:	Do	not	 align	 screw	 holes	on	template	 directly	under	the	partition	
between	 cabinets,	 as	this	 will	 prevent	 you	from	 installing	 the	appliance	 properly.	
Pay	close	 attention	 to	where	 the	drill	 holes	 will	be	set	 so	as	not	 to	damage	 your	
cabinets	 during	mounting.	 Drilling	through	 your	cabinet’s	 partition	may	cause	
damage	 to	cabinets	 and	prevent	 proper	installation.
  7. Making sure to keep the fold line straight against the back edge of the 
overhang...




L
14. Place the appropriate number of spacers determined in step 12 on both of the 
rear screws to ensure the appliance will be even (L).
Note:	If the height of your overhang molding is too tall to be accommodated by 
the number of spacers provided, you may call, toll-free, at 1-800-231-9786 to 
order additional spacers at no charge.
Note: For spacer installation, you may require assistance in mounting in order to 
hold spacers in place while securing the appliance at the same...




 4. Holding the grinding bowl from the bottom, securely insert it up into the center of 
the bottom of the motor housing with the arrow ▲ symbol on the bowl directly 
under the UNLOCK  symbol on the bottom of the motor housing (N).
 5.  Turn the grinding bowl clockwise until it locks into position.  The LOCK  symbol 
on the housing should be aligned with the arrow on the grinding bowl.
Note: There is a safety feature on this appliance that will not allow the grinder to 
operate...

6
7

 1. Place the chopping blade on the spindle in the center of the workbowl. With your 
fingers on the top of the stem of the chopping blade, give it a twisting motion 
while pushing down to make sure it is securely seated on the spindle (Q). 
Important:	 Handle	grinding	 blade	carefully.		 It	is	 very	 sharp.
 2. Place up to 1¼ cups (135 g) of food to be processed into the workbowl. 
 3. With your fingers on the top of the stem of the chopping blade, give it a twisting 
motion to make sure...

8
9

TROUBLESHOOTING
PROBLEM	 POSSIBLE	CAUSE	SOLUTION
Grinder stops  The ground coffee bowl  Make sure the grinding bowl  
working. has disengaged.  is correctly inserted into  
 There are too many beans  the motor housing. Unplug  
 in the grinding bowl.  the appliance and remove  
   some of the beans from the  
   grinding bowl. 
Coffee tastes Grinder has buildup of  Oil in the coffee beans  
rancid. coffee grounds.  will become rancid if left  
   in the grinder. Makes sure  
   there are...