Black and Decker 8CUP THERMAL COFFEEMAKER SDC850Q User Manual


USA/Canada	 1-800-231-9786
www.prodprotect.com/applica
Accessories/Parts	(USA/Canada)
Accesorios/Partes	(EE.UU/Canadá)
1-800-738-0245
Please Read and Save this Use and Care Book
Por favor lea este instructivo antes de usar el producto
™
†
8-Cup  THERMAL  
u N D E R - T H E - C A B I N E T 
Coff EEMA kER
CA fETERA   TÉRMICA  
DE  8 TA zA s 
pARA  IN sTALAR DEBAJ o  DEL  GABINETE
Register your product online at www.prodprotect.com/applica, for  a chance to WIN $100,000! for  us  residents only...




IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always 
be followed, including the following:
❑ Read all instructions.
❑ Do not touch hot surfaces. Use handles or knobs.
❑ To protect against fire, electric shock and injury to persons do not 
immerse cord, plugs or appliance in water or other liquid.
❑ Close supervision is necessary when any appliance is used by or near 
children.
❑ Unplug from outlet when not in use and before cleaning. Allow to cool...




GROUNDED PLUG
As a safety feature, this product is equipped with a grounded plug, which will only 
fit into a three-prong outlet. Do not attempt to defeat this safety feature. Improper 
connection of the grounding conductor may result in the risk of electric shock. Consult a 
qualified electrician if you are in doubt as to whether the outlet is properly grounded.
ELECTRICAL CORD
a) A short power-supply cord is to be provided to reduce the risk resulting from 
becoming entangled in or...

6
7

†   .  Mounting Parts     (Part # SDC-MOUNTING KIT)
   A. 6 Spacers            ½"           ¼"           /6"            /6"
   B.   Screws            "           ½"            ¼"
   C.  Washers
   .  Mounting Template (in box)
You will also need:
•  Tape
•  Ruler (or you may cut out the ruler provided on the template)
•  Electric drill with a ¼” drill bit
A
A
C
B...

8
9

Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect 
smaller †SpaceMaker™ appliances such as the mini food processor / grinder or 
can opener. Do not use this outlet for any other appliance!
Caution: When selecting a location for your coffeemaker, make sure you have 
adequate room to reach the receptacle.
Note: If you are connecting another †SpaceMaker™ appliance into the Save-A-
Plug™ outlet, make sure you can easily unplug the appliance after each use.
DETERMINE CABINET...

0


11.  Once the panel is secure, reattach coffeemaker to panel by lifting appliance 
up, aligning it with the track on the panel and then sliding it back into place.
12. Plug into standard electrical outlet. Extra cord can be hung over cord 
management hook behind unit (G).
Caution: This appliance features a Save-A-Plug™ outlet receptacle to connect 
smaller †SpaceMaker™ appliances such as the mini food processor / grinder or 
can opener. Do not use this outlet for any other appliance!...




12. Now, use your ruler or the paper ruler provided to measure the overhang 
molding height, placing your ruler vertically against the underside of the 
cabinet behind the overhang molding. This number determines the number of 
spacers you need, using a number of spacers equal to the overhang molding 
height. For example, a 1” overhang molding would use 2, ½” spacers on each 
of the rear holes (L).
13. Drop one of your screws through each of the washers covering the holes in the...




• To place brew-through lid on carafe, press the side buttons and press the lid into 
place securely on the thermal carafe with the spout facing away from the handle 
(Q).
Note: Once cover is securely in place the side buttons will return to their original 
position on the brew-through cover.
• Insert carafe securely along slots of carafe holder. Make sure carafe is fully inserted.
• Plug power cord into standard electrical outlet. Water reservoir light will be 
illuminated and...

6
7

6.  Insert brew basket into brew basket holder, snapping into place securely.
7. Place brew-through lid on empty carafe. 
Note: Coffee may overflow if brew-through lid is not properly aligned.
8. Insert carafe securely along slots of carafe holder. Make sure carafe is fully inserted 
(U). 
 9.  Plug cord into standard electrical outlet.
 10.  Press ON/OFF button; power light is illuminated. Brewing begins OR – to delay 
    brewing – set the auto function (V). (See DELAYED BREWING). 
 11....

8
9

DELAYED BREWING
1.  Follow steps 1 through 9 under BREWING COFFEE.
2. Make sure clock has been set to correct time of day.
3. Press the PROG button (the word PROGRAM appears above the time on the LCD); 
the AUTO light flashes.  
4. To select the time for delayed brewing: Press HOUR button until the correct time 
appears on the display. Repeat with the MIN button. Press the PROG button again. 
The delayed brewing time is set.
5. Press the AUTO button to activate the delayed brewing. The...