Bissell 9200-a Manual

							PROHEAT 2X
®
USER GUIDE
8930, 9200, 9300 SERIES  
						

							ImpoRtant SafEty InStRUctIonS
www.bissell.com
      800.237.76912
W
aRnInG
To reduce The risk of fire, 
elecTric shock, or injury:
»   \fonne\bt to a properly grounded 
outlet only. See grounding   
instru\btions. Do not modify the 
3-prong grounded plug.
»    Do not leave applian\be when it is 
plugged in. Unplug from outlet when 
not in use and before servi\bing.
»    Use indoors only.
»    Do not allow to be used as a toy. 
\flose attention is ne\bessary when 
used by or near \bhildren.
»    Do not use for any purpose other 
than des\bribed in this User’s 
Guide. Use only manufa\bturer’s 
re\bommended atta\bhments.
»    Do not use with damaged \bord   
or plug. If applian\be is not   
working as it should, or has been 
dropped, damaged, left outdoors, 
or dropped into water, have it 
repaired at an authorized   
servi\be \benter.
»    Always install float before any wet   
pi\bk-up operation. »   
Do not pull or \barry by \bord, use 
\bord as a handle, \blose a door on 
\bord, or pull \bord around sharp 
edges or \borners. Do not run 
applian\be over \bord. Keep \bord 
away from heated surfa\bes.
»    Do not unplug by pulling on   
\bord. To unplug, grasp the plug, 
not the \bord. 
»    Do not handle plug or applian\be 
with wet hands.
»    Do not put any obje\bt into open-
ings. Do not use with any opening 
blo\bked; keep openings free of 
dust, lint, hair, and anything that 
may redu\be air flow.
»    Keep hair, loose \blothing, fingers, 
and all parts of body away from 
openings and moving parts.
»    Turn off all \bontrols before plug-
ging or unplugging applian\be.
»    Use extra \bare when \bleaning   
on stairs.
»    Do not use to pi\bk up flammable 
or \bombustible materials (lighter 
fluid, gasoline, kerosene, et\b.)   
or use in areas where they may   
be present. »   
Do not use applian\be in an 
en\blosed spa\be filled with vapors 
given off by oil base paint, paint 
thinner, some moth proofing   
substan\bes, flammable dust,   
or other explosive or toxi\b vapors.
»    Do not use to pi\bk up toxi\b   
material (\bhlorine blea\bh,   
ammonia, drain \bleaner, et\b.).
»    Do not pi\bk up anything that   
is burning or smoking, su\bh as 
\bigarettes, mat\bhes, or hot ashes.
»    Use only BISSELL \bleaning   
produ\bts intended for use   
with this applian\be to prevent   
internal \bomponent damage.   
See the \fleaning Fluid se\btion   
of this guide. 
»    Unplug before \bonne\bting 
TurboBrush Tool.
»    Do not immerse. Use only on dry 
surfa\bes or surfa\bes moistened by 
the \bleaning pro\bess. 
»    Keep applian\be on a level surfa\be.
»    Do not \barry the applian\be while   
in use.
REaD all  InStRUctIonS \fEfoRE  USInG yoUR DEEp clEanER.  
When using an electrical appliance, basic precautions should be observed, including the following: 
This model is for household use only.  Commercial use of this unit voids the manufacturer’s warranty.
Sa VE  tHESE InS tRUctIonS   
foR  fUtURE USE
WaRnInG
Improper connection of the equipment-grounding conductor can 
result in a risk of electrical shock.  Check with a qualified electrician 
or service person if you aren’t sure if the outlet is properly grounded. 
DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper 
outlet installed by a qualified electrician. This appliance is designed 
for use on a nominal 120-volt circuit, and has a grounding attachment 
plug that looks like the plug in the illustration. Make certain that the 
appliance is connected to an outlet having the same configuration as 
the plug. No plug adapter should be used with this appliance.GRoUnDInG InS tRUctIonSThis appliance must be connected to a grounded wiring system. If it 
should malfunction or break down, grounding provides a safe path 
of least resistance for electrical current, reducing the risk of electrical 
shock. The cord for this  
appliance has an equipment-grounding   
conductor and a grounding plug. It must   
only be plugged into an outlet that is   
properly installed and grounded in   
accordance with all local codes and ordinances.
Grounded 
Outlets
Grounding Pin  
						

							Thanks for buying a BISSELL deep cleaner
We’re glad you pur\bhased a BISSELL 
deep \bleaner. Everything we know 
about floor \bare went into the design 
and \bonstru\btion of this \bomplete, 
high-te\bh home \bleaning system.
Your BISSELL deep \bleaner is well 
made, and we ba\bk it with a limited 
two-year warranty. We also stand 
behind it with a knowledgeable,  
dedi\bated \fonsumer \fare   
department, so, should you ever   
have a problem, you’ll re\beive fast, 
\bonsiderate assistan\be.
My great-grandfather invented 
the floor sweeper in 1876. Today, 
BISSELL is a global leader in the 
design, manufa\bture, and servi\be  
of high quality home\bare produ\bts  
like your BISSELL deep \bleaner.
Thanks again, from all of us  
at BISSELL.
Mark J. Bissell  
\fhairman & \fEOSafety Instru\btions ...........2
Produ\bt View ................ 4
Assembly ..................\». 5
Operations ............... 6-12
Maintenan\be & \fare ...... 13-15
Troubleshooting ............16
Repla\bement Parts ......... 17
A\b\bessories ................ 18
Warranty ..................\». 19
\fonsumer \fare .............19
Produ\bt Registration .......20
»  Deep cleaning stairs and high-traffic areas on a regular 
basis helps prolong carpet life. 
»   Check upholstery stuffing before cleaning. Colored 
stuffing may bleed through the fabric when it 
becomes wet. »  
Before turning off the machine, suction up clean 
water to thoroughly rinse out the interior of the flex 
hose. Then, lift the cleaning tool and point it upwards 
to drain any remaining water into the dirty water/
collection tank.
Ti ps 
						

							1 Extra Long Power Cord
2  Power Switch
3  Heater Switch
4  Flex Hose
5  Upper Handle
6  Easy Carry Handle
7  Heat Indicator Light
8  Tank Carry Handle
9  ReadyTools™ Dial
10  2-in-1 Water Tank 11 
Easy To Remove Nozzle
12  Lower Base
13  EdgeSweep® Brushes
14  Spray Trigger
15  Upper Hose Rack
16  Hose Secure Latch
17  Lower Hose Rack
18  Custom Clean® Dial
19  Detent Pedal
20  Formula Tank
Product View
www. bissell.com
      800.237.76914
2
1
3
4
6
5
7
8
9
1113
10
12
20
19
18
17
16
15
14 
						

							www.bissell.com
      800.237.76915
\four d\b\bp cl\ban\br com\bs in four, \basy to 
ass\bmbl\b compon\bnts: 
  Upp\br Handl\b  
  l ow\br Handl\b  
  Upp\br Hos\b Rack  
  l ow\br Hos\b Rack
Th\b only thing you will n\b\bd to ass\bmbl\b your 
cl\ban\br is a Phillips h\bad scr\bwdriv\br.
1.  slid\b upp\br handl\b onto low\br handl\b. 
2.  scr\bw 3 scr\bws into th\b mark\bd hol\bs.
3.  Plac\b upp\br hos\b rack onto back of upp\br 
handl\b, and s\bcur\b with scr\bw.
4.  Plac\b low\br hos\b rack onto back of upp\br 
handl\b by pushing in and sliding down until it 
snaps into plac\b.
5.  snap tools into th\b tool caddy.
6.  Wrap pow\br cord and fl\bx hos\b.
7.   K\b\bp fl\bx hos\b snugly in plac\b by using   
th\b hos\b s\bcur\b latch.
PROh\bat 2X ass\bmbly is now compl\bt\b.
Assembly
Operations
c\beaning f\buid 
K\b\bp pl\bnty of g\bnuin\b  bissell 2X formula on 
hand so you can cl\ban and prot\bct wh\bn\bv\br it 
fits your sch\bdul\b. Always us\b g\bnuin\b  bissell 
d\b\bp cl\baning formulas. Non-bissell   
cl\baning solutions may harm th\b machin\b and 
will void th\b warranty.
*ONl \f bissell Prot\bcts from futur\b stains with  scotchgard™ Prot\bctor
WaRnInG
To reduce the risk of fire and electric shock 
due to internal component damage, use 
only BISSELL cleaning fluids intended for use 
with the deep cleaner. 
Professional   
Deep Cleaning Pet Stain & Odor Deep Clean 
 
& Protect Allergen Cleansing
Hard Floor Solutions Stain Pretreat
78H6-3 99K5-2 62E5-289Q5-2 56L94001
Best for Out Cleans 
 
all other   
formulas Removes tough pet 
stains and contains  patented odor 
removal technology Deep cleans carpets 
and protects from future stains with 
Scotchgard™ Protector Helps remove pet & 
pollen allergens   For use with 
 
the Bare   
Floor Tool   
(select models)  Pretreat to 
 
penetrate   
and loosen   
tough stains
2X Concentrated XXXXX
Scotchgard™ Protection®XXX
Hos\b s\bcur\b 
latch
1.
3. 2.
4.
7.
W aRnInG
Do not plug in your deep cleaner until you are familiar with 
all instructions and operating procedures.  
						

							Specia\b features 
\four  bissell PROh\bat 2X d\b\bp cl\ban\br is a 
hom\b cl\baning syst\bm that us\bs th\b pow\br of 
h\bat, brush\bs and cl\baning formula to g\bt th\b 
d\b\bp down dirt for a maximum cl\ban. Not only 
do\bs it com\b with s\bv\bral uniqu\b f\batur\bs, it has 
b\b\bn d\bsign\bd with you, th\b custom\br, in mind.
\fui\bt-in-Heater feature bissell PROh\bat 2X mod\bls all f\batur\b a   
pat\bnt\bd built-in h\bat\br which will h\bat th\b 
hot tap wat\br you put in up to 25 d\bgr\b\bs hot-
t\br to saf\bly optimiz\b cl\baning \bff\bctiv\bn\bss. 
Th\b h\bat\br will n\bv\br allow th\b t\bmp\bratur\b to 
\bxc\b\bd 190°F. Th\b h\bat\br switch on th\b front of 
th\b machin\b controls th\b h\bat\br so you hav\b th\b 
option to turn off th\b h\bat if you ar\b cl\baning 
d\blicat\b wool or ori\bntal rugs. 
2-in-1 Water  tankOur 2-in-1 wat\br tank full capacity syst\bm is 
d\bsign\bd with a h\bavy duty bladd\br insid\b for 
cl\ban wat\br. As you cl\ban, th\b cl\ban wat\br in th\b 
bladd\br will \bmpty and mix with th\b cl\baning 
formula. Dirty wat\br pull\bd out of your carp\bts 
will coll\bct around th\b outsid\b of th\b bladd\br so 
that cl\ban and dirty wat\br ar\b always k\bpt s\bpa-
rat\b. This allows th\b us\br to only carry on\b tank 
to and from th\b sink for \bmptying and filling.
Readyt oo\bs™ Dia\bThis provid\bs \bith\br floor cl\baning or abov\b 
floor cl\baning with th\b turn of a knob. Choos\b 
“TOOls” s\btting for stairs, upholst\bry and   
hard to r\bach ar\bas and “Fl OOR CleANiNG”  
for carp\bts, ar\ba rugs and bar\b floors.
\fefore you c\bean
1.  Mov\b furnitur\b to anoth\br ar\ba if cl\baning an 
\bntir\b room (optional).
2.  Pick up all loos\b dirt, d\bbris, and p\bt hair 
b\bfor\b d\b\bp cl\baning.  if you’r\b cl\baning just a 
small ar\ba of carp\bting or l\bss than a whol\b 
room, th\b ProH\bat 2X D\b\bp Cl\ban\br may b\b 
us\bd to vacuum th\b ar\ba b\bfor\b d\b\bp cl\baning. 
if so, b\b sur\b to k\b\bp th\b r\bd filt\br scr\b\bn (in th\b 
2-in-1 tank lid) cl\ban\bd of lint so that suction 
is maintain\bd. Wh\bn you’r\b don\b, cl\bar th\b r\bd 
filt\br scr\b\bn and th\bn rins\b both th\b dirty wat\br 
and th\b cl\ban solution tank (insid\b th\b fl\bxibl\b 
bladd\br) with warm wat\br b\bfor\b starting th\b 
d\b\bp cl\baning proc\bss.
3.  Plan your cl\baning rout\b to l\bav\b an \bxit path. 
it is b\bst to b\bgin cl\baning in th\b corn\br farth\bst 
from your \bxit.  
Operations
www. bissell.com
      800.237.7691
W
aRnInG
Do not plug in your cleaner until you have 
completely assembled it per the above   
instructions and are familiar with all   
nstructions and operating procedures.
6
123
456
789
a ttEntIonSome Berber carpets have a tendency to fuzz 
with wear. Repeated strokes in the same area 
with an ordinary vacuum or deep cleaner 
may aggravate this condition. Please see Stain 
Removal instructions on page 10.  
						

							4. Pretreating (optional) 
Pr\btr\bating is r\bcomm\bnd\bd to improv\b cl\baning 
\bff\bctiv\bn\bss for h\bavily soil\bd carp\bt in high   
traffic ar\bas such as \bntryways and hallways. 
  BI\f\fELL \ftain PreTreat
   a. spray th\b  bissell stain Pr\bTr\bat   
formula onto h\bavy traffic ar\bas, soil\bd 
ar\bas, or stains.
   \b. Allow to p\bn\btrat\b for at l\bast 3 minut\bs.
   c. Cl\ban as normal, using th\b  bissell 
PROh\bat 2X machin\b on th\b high traffic   
s\btting, following th\b instructions b\blow.
carpet c\beaning
1.  Fill th\b 2-in-1 Wat\br Tank. R\bmov\b th\b tank from 
th\b bas\b of th\b machin\b by lifting up th\b tank 
carry handl\b. Carry lik\b a buck\bt to th\b sink.
    a. Unlatch th\b top of th\b tank from th\b   
bottom by lifting up on th\b tank latch   
locat\bd on th\b back of th\b tank.
   \b .   R\bmov\b th\b top of th\b tank by lifting   
up on th\b handl\b. 
    Not\b how th\b lip on th\b top tank s\bparat\bs 
from th\b groov\b in th\b bottom tank. This 
plac\bm\bnt is important wh\bn putting th\b 
tank back tog\bth\br.
    c. Fill th\b h\bavy duty bladd\br with cl\ban   
hot (140°F/60°C MAX) tap wat\br.  Do not 
\boil or microwave water as it can destroy 
the \bladder.  
    d. l\baving th\b fill\bd bottom of th\b tank on 
a flat surfac\b, only man\buv\br th\b top of th\b 
tank. To attach th\b top part of th\b tank to 
th\b bottom, car\bfully hook th\b lip on th\b top 
tank into th\b groov\b on th\b bottom tank. 
   e .   Fast\bn tanks tog\bth\br by s\bcuring th\b 
latch in th\b back.
notE:  Remember to secure the tank \batch in 
the  back and test to make sure it is secure 
before picking up the tank.
2.  R\bmov\b formula tank from back of machin\b. 
3.  Fill th\b formula tank by first unscr\bwing th\b 
cap and ins\brt. Always us\b g\bnuin\b  bissell 2X 
formulas to maximiz\b cl\baning and for th\b saf\bty 
of your machin\b. Fill with wat\br to WATeR lin\b 
and th\bn fill up to FORMUlA lin\b with  bissell 
2X Conc\bntrat\bd formula. R\bplac\b formula tank.
Operations
www. bissell.com
      800.237.76917
1.
1b. 1a.
1c.
1d. 1e.
3.2.
W
aRnInG
To reduce the risk of fire and electric shock due to internal 
component damage, use only BISSELL cleaning fluids 
intended for use with the deep cleaner.  
						

							Operations
4. s\bt Custom Cl\ban Dial.  simply choos\b on\b of 
th\b 4 s\bttings (h\bavy traffic, normal cl\ban, light 
cl\ban, or wat\br rins\b).
5.  s\bt R\badyTools Dial to th\b floor cl\baning   
s\btting.
6.  Plug into a prop\br outl\bt and turn th\b pow\br 
and h\bat\br switch\bs to th\b ON (  i ) position. 
Allow 1 minut\b for th\b built-in h\bat\br to warm-up 
b\bfor\b cl\baning. Th\b PROh\bat 2X will b\b fully 
warm\bd and will provid\b optimal p\brformanc\b 
aft\br a minut\b of continuous h\bat\bd cl\baning.
7.   Cl\baning  strok\bs. Whil\b pr\bssing th\b trigg\br, 
mak\b on\b slow forward w\bt pass and anoth\br 
on\b back.  Caution: Do not overwet. Tak\b car\b not 
to run ov\br loos\b obj\bcts or \bdg\bs of ar\ba rugs. 
s talling brush may r\bsult in pr\bmatur\b b\blt failur\b.  
notE:  your machine is equipped with a circuit 
breaker that wi\b\b automatica\b\by shut off the 
brush if a \barge or \boose object is caught in the 
brush ro\b\b. If that happens, be sure to unp\bug 
your machine, remove the foreign object, and 
then p\bug the machine back in to reset the   
circuit breaker. 
R\bl\bas\b th\b trigg\br and mak\b on\b slow   
forward and backward pass ov\br th\b sam\b ar\ba 
to r\bmov\b any r\bsidual dirty wat\br and aid in 
drying. R\bp\bat cl\baning pass\bs until solution 
b\bing pull\bd up app\bars cl\ban. Continu\b pass\bs 
without pr\bssing th\b trigg\br until you can’t s\b\b 
any mor\b wat\br b\bing pull\bd up. 
8.  R\bmov\b th\b tank from th\b bas\b of th\b 
machin\b by lifting up on th\b tank carry handl\b. 
Carry lik\b a buck\bt to a utility sink or outsid\b 
wh\br\b you will dispos\b of th\b dirty wat\br.
    a. Unlatch th\b top of th\b tank from th\b   
bottom by lifting up on th\b tank latch   
locat\bd on th\b back of th\b tank.
   \b .   R\bmov\b th\b top of th\b tank by lifting up 
on th\b handl\b. 
    Not\b how th\b lip on th\b top tank s\bparat\bs 
from th\b groov\b in th\b bottom tank. This 
plac\bm\bnt is important wh\bn putting th\b 
tank back tog\bth\br.
    c. lift th\b bottom portion of th\b tank;   
pour out dirty wat\br in th\b sink through   
th\b triangular shap\bd op\bning in th\b corn\br 
of th\b tank.
notE:  you may notice hair & debris deposits on 
the carpet or in the tank that were \boosened by 
the c\beaning action.  this debris shou\bd be picked 
up and thrown away.  check the red \bint fi\bter 
inside the tank for debris and remove before 
continuing.
    d. Fill th\b h\bavy duty bladd\br with cl\ban hot 
tap wat\br, following instructions 1c through 
1\b on pag\b 7.
www. bissell.com
   
   800.237.76918
4.
5.
6.
Pow\br  switch H\bat\br 
switch
8.
8b.
8d. 8c.
8a. 
						

							notE: Remember to secure the tank \batch in 
the back and test to make sure it is secure 
before picking up the tank. a\bways check the 
\beve\b of c\beaning formu\ba in the formu\ba tank at 
the same time, and refi\b\b as needed.
9.  Wat\br rins\b (r\bcomm\bnd\bd). Rinsing   
is an optional st\bp that can b\b don\b during th\b 
cl\baning proc\bss or aft\br th\b carp\bt\bd ar\ba has 
b\b\bn compl\bt\bd.  switch to th\b wat\br rins\b s\bt-
ting, on th\b Custom Cl\ban dial and follow th\b 
sam\b path as you did for cl\baning. Tak\b car\b to 
do a forward (w\bt) strok\b by d\bpr\bssing th\b   
trigg\br, and a backward (w\bt) strok\b, follow\bd by 
a forward and backward (dry) strok\b, r\bl\basing 
th\b trigg\br. Continu\b this until th\b wat\br you s\b\b 
coming up th\b nozzl\b is cl\bar. (s\b\b pag\b 13 for 
mor\b machin\b car\b tips.)
c\beaning with attachments
\four PROh\bat 2X machin\b com\bs \bquipp\bd with 
a hos\b and at l\bast on\b attachm\bnt for cl\baning 
stairs, upholst\bry, and mor\b.
1. Important!  if using to cl\ban upholst\bry, ch\bck 
upholst\bry tags. 
    a. Ch\bck manufactur\br’s tag b\bfor\b cl\baning. 
“W” or “W s” on th\b tag m\bans you can us\b 
your PROh\bat 2X.  if th\b tag is cod\bd with an 
“X” or an “s” (with a diagonal strip\b through 
it), or says “Dry Cl\ban Only”, do not proc\b\bd 
with any d\b\bp cl\baning machin\b. Do not   
us\b on v\blv\bt or silk.  if manufactur\br’s tag   
is missing or not cod\bd, ch\bck with your   
furnitur\b d\bal\br.
   \b .   Ch\bck for colorfastn\bss in an   
inconspicuous plac\b.
    c. if possibl\b, ch\bck upholst\bry stuffing. 
Color\bd stuffing may bl\b\bd through fabric 
wh\bn w\bt.
    d. Plan activiti\bs to allow upholst\bry tim\b   
to dry.
   e .   Pick up any loos\b dirt, d\bbris and p\bt hair 
b\bfor\b d\b\bp cl\baning.
2.  Follow th\b instructions on pag\b 7 for filling   
th\b 2-in-1 wat\br tank and th\b formula tank.
3.  s\bt R\badyTools dial to th\b “TOOls” s\btting. 
This will allow spray and suction from th\b hos\b. 
4.  s\bt Custom Cl\ban dial for h\bavy traffic, nor-
mal cl\ban, light cl\ban, or wat\br rins\b as d\bsir\bd.
5.  Attach th\b cl\baning tool to th\b \bnd of th\b hos\b.  
6.  Plug in and turn on th\b pow\br switch and 
h\bat\br (if d\bsir\bd).
Operations
W aRnInG
To reduce the risk of injury, be extra careful when cleaning 
stairs. Make sure machine is secure and level.
www. bissell.com
      800.237.76919
9.
5.
Adsdfdd  ghg bvh
cvbbj  jkn hnbj  jkvh
gcghh jj  jhffhl kl lgh
Manufactur\br’s tag  
						

							notE: If your deep c\beaner came with a  
Deep Reach  too\b or Stain  trapper  too\b,   
do not fo\b\bow c\beaning instructions be\bow. 
Instead, fo\b\bow instructions in next section.
7.   Cl\ban by pr\bssing th\b trigg\br to spray solution 
onto th\b ar\ba to b\b cl\ban\bd.  slowly mov\b th\b tool 
back and forth ov\br th\b soil\bd surfac\b. R\bl\bas\b 
th\b trigg\br to suction soil\bd wat\br. Continu\b to 
cl\ban in th\b ar\ba, working in small s\bctions, until 
no mor\b dirt can b\b r\bmov\bd. Rins\b (optional) 
and suction as n\b\bd\bd.  Caution: Do no overwet.
8.  R\bmov\b and rins\b tools in cl\ban, running 
wat\br. Dry and r\bplac\b in th\b tool caddy.
9.  it is r\bcomm\bnd\bd that you suction cl\ban 
wat\br from a bowl to rins\b out th\b hos\b. 
10.  b\bfor\b r\bplacing lift \bnd of hos\b and str\btch 
out to \bnsur\b all wat\br is cl\bar\bd from hos\b.
11.  Wrap fl\bx hos\b around th\b tool caddy.
12.  empty 2-in-1 wat\br tank and rins\b out,   
following th\b instructions on pag\b 8.  
13.  R\bturn R\badyTools dial to floor s\btting.
Deep Reach  too\b attachment
(Se\bect mode\bs on\by) 1.  Follow th\b instructions on pag\b 7 for filling th\b 
2-in-1 wat\br tank and th\b formula tank.
2.  Follow instructions 3-6  on pag\b 9 und\br 
“Cl\baning with attachm\bnts”.
3.  s\bt tool on stain and pr\bss th\b trigg\br to spray 
solution onto th\b ar\ba to b\b cl\ban\bd.
4.  slowly mov\b th\b tool back and forth ov\br th\b 
soil\bd surfac\b, k\b\bping th\b tool in contact with 
th\b carp\bt.
5.  R\bl\bas\b trigg\br and mov\b tool slowly ov\br th\b 
soil\bd ar\ba to suction up wat\br and dirt.
6.  Continu\b to cl\ban th\b ar\ba, working in small 
s\bctions, until no mor\b dirt can b\b r\bmov\bd. 
7.   R\bmov\b tool from hos\b wh\bn finish\bd. Cl\ban 
und\br warm wat\br b\bfor\b storing.
Stain remova\b
Do Not Delay!  Att\bnding to an accid\bnt soon 
aft\br it occurs \bnsur\bs th\b most optimal cl\ban. 
l \baving it for an \bxt\bnd\bd p\briod of tim\b may 
caus\b it to s\bt and b\bcom\b p\brman\bnt.
1.  blot up liquids with an absorb\bnt cloth or 
pap\br tow\bls. Whit\b mat\brials ar\b r\bcomm\bnd\bd 
b\bcaus\b c\brtain dy\bs may bl\b\bd and mak\b th\b 
stain wors\b.
2.  G\bntly scrap\b up any s\bmi-solids with a spoon 
or spatula. Do not us\b a knif\b or oth\br ut\bnsil 
with sharp \bdg\bs b\bcaus\b it could damag\b th\b 
carp\bt or upholst\bry.
Operations
www. bissell.com
      800.237.769110
10.
3.
5.
7.