Bissell 89q94 Manual

							USER’S GUIDE89Q9/18Z6 SERIES
3Safety Instructions
4Product View
5-6 Assembly
6-9
Operations 
10-15 Maintenance and Care
16-17Troubleshooting
18Consumer Services
18
19Additional Accessories
Replacement Parts
20Warranty 
						

							2
Thank you for buying a BISSELL Multi Cyclonic vacuum 
 2www.bissell.com 800.237.7691
We’re glad you purchased a BISSELL vacuum. Everything we know about floor 
care went into the design and construction of this complete, high-tech home 
cleaning system.  By purchasing this product you are helping BISSELL with our 
commitment to reducing our impact on the environment through an expanding 
range of sustainable design efforts.
Your carpet cleaner is well made, and we back it with a limited one-year warranty. 
We also stand behind it with a knowledgeable, dedicated Consumer Services depart-
ment, so, should you ever have a problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a 
global leader in the design, manufacture, and service of high quality homecare 
products like your carpet cleaner.
Thanks again, from all of us at BISSELL. 
Mark J. Bissell
President and Chief Executive Officer 
						

							 3
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic  
precautions should be observed, including   
the following: 
R EAD  ALL  In STRUCTIO nS 
BEfORE  USInG yOUR  
UPRIGhT VACUUM. 
Always connect to a polarized outlet (left slot is wider 
than right). Unplug from outlet when not in use and 
before conducting maintenance. 
   WARnInG: To reduce the 
risk of fire, electric shock,   
or injury:
 ■   Do not  modify the polarized plug to fit a   
non-polarized outlet or extension cord.
■   Do not leave vacuum cleaner unattended   
when it is plugged in.
■     Unplug from outlet when not in use and   
before servicing.
■   Do not use outdoors or on wet surfaces.
■  Do not allow children to operate vacuum   
cleaner or use as a toy.
■   Close attention is necessary when used by or near 
children.
■  Do not use for any purpose other than described in 
this User’s Guide.
■  Use only manufacturer’s recommended   
attachments.
■   Do not use with damaged cord or plug.
■  If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped into 
water, have it repaired at an authorized   
service center.
■   Do not pull or carry by cord, use cord as a handle, 
close a door on cord, or pull cord around sharp 
edges or corners. Do not run appliance over cord. 
Keep cord away from heated surfaces.
■  Do not unplug by pulling on cord. To unplug, grasp 
the plug, not the cord.
■  Do not handle vacuum cleaner or plug with  wet hands.
■
  Do not put any object into openings. Do not use with 
any opening blocked; keep openings free of dust, 
lint, hair, and anything that may reduce air flow.
■  Keep hair, loose clothing, fingers, and all parts of 
body away from openings and moving parts.
■  Turn off all controls before plugging or unplugging 
vacuum cleaner.
■  Use extra care when cleaning stairs.
■  Unplug before attaching the TurboBrush.
■  Do not pick up flammable materials (lighter fluid, 
gasoline, kerosene, etc.) or use in the presence of 
explosive liquids or vapors.
■  Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, etc.).
■  Do not use vacuum cleaner in an enclosed space 
filled with vapors given off by oil base paint, paint 
thinner, some moth proofing substances,   
flammable dust, or other explosive or toxic vapors.
■   Do not pick up hard or sharp objects such as 
glass, nails, screws, coins, etc.
■  Do not pick up anything that is burning or smoking, 
such as cigarettes, matches, or hot ashes.
■  Do not use without filters in place.
■  Use only on dry, indoor surfaces.
■  Keep appliance on a level surface.
SAVE T hESE   
InSTRUCTIOnS  fOR 
fUTURE USE
ThIS APPLIAnCE  hAS 
A POLARIZED PLUG.
To reduce the risk of electric shock, this appliance has a 
polarized plug (one blade is wider than the other). This plug 
will fit in a polarized outlet only one way. If the plug does 
not fit fully in the outlet, reverse the plug. If it still does not 
fit, contact a qualified electrician to install a proper outlet. 
Do not change the plug in any way.
This model is for household use only.
www.bissell.com  800.237.7691 
						

							 4www.bissell.com 800.237.7691
 CAUTIOn:  Do not plug in your vacuum 
cleaner until  you are familiar 
with  all instructions  and  
operating procedures.
Product view
Power Switch Pet TurboBrush
®
Handle
Release Switch
Dirt Container Pre-Motor 
Filter
Headlight
Height 
Adjustment 
Knob PowerfootBrush On/Off Switch
Lock 'n 
Seal
® Lever
Furniture 
Protection 
Guard Dusting Brush/ 
Upholstery Tool
Hose Clip
Twist n' 
Snap Hose 
Connection
Crevice Tool
HEPA Media 
Post-Motor Filter
Handle Release 
Pedal Hose Grip 
Base
Cord Clip
Stretch Hose
Quick Release 
Cord Wrap
Telescoping 
Extension 
Wand
Hose Grip 
						

							 5www.bissell.com 800.237.7691
How to use this guide
Assembly
 
WARnInG:   Plastic film can be   
dangerous. To avoid   
danger of suffocation, 
keep away from babies 
and children.
This user’s guide has been designed to help you 
get the utmost satisfaction from your BISSELL   
vacuum.  you’ll find assembly and operating 
instructions, safety precautions, as well as   
maintenance and troubleshooting instructions. 
Please read this guide thoroughly before   
assembling your vacuum cleaner. 
Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate 
and organize all parts before assembly.  following 
this user’s guide will greatly enhance your ability 
to get the most performance from your BISSELL 
vacuum for many years.
The only tool you’ll need to assemble your   
vacuum cleaner is a Philips head screwdriver.
Attach handle to vacuum
1.  Locate the vacuum handle and remove the 
screw packet taped to the base of the handle.
2. 
Stand the vacuum upright and slide the base of   
the handle firmly into the grooves at the top of 
the vacuum body.
3. Check to be sure the handle is fitted to the 
vacuum body. If there is a gap in front, continue 
to push firmly until the handle is flush.
4. Insert the two screws from the screw packet into the 
existing holes. Tighten securely with a screwdriver.
Attach vacuum hose and tools
1.  Position the Twist ‘n Snap Hose™ assembly on 
the vacuum and line up the tabs on the base of 
the hose with the corresponding notches. Turn the 
Twist ‘n Snap Hose to the right to lock into place.
2. 
Slide the end of the hose grip onto the hose grip 
base. Place the hose into the hose clip. nOTE: The powerfoot will not operate effectively 
unless the hose is firmly attached to the base.
2.
4.
1. 2. 
						

							16www.bissell.com 800.237.7691
Attach vacuum hose and tools continued
3. Snap the telescoping extension wand,   
crevice tool, and combination tool into   
storage clips as shown.
4.  The Pet TurboBrush snaps on to the holder 
on the front of the handle.
  Place the Pet TurboBrush in the holder by 
hooking the bottom onto the tab and pushing 
the top of the TurboBrush into place.
Power switch/brush switch
The power switch is located just below the handle 
on the front of the detachable canister. Push the 
rocker switch “O n” (I) to vacuum, and “O ff” (O) 
when cleaning is complete.
The brush switch is located just below the 
handle on the front of the detachable canister 
next to the power switch. This switch turns the 
rotating brush on and off. The brush switch 
should be in the “On” (I) position for normal 
carpet cleaning.   you may want to turn the brush 
switch “Off” (O) for bare floor cleaning or other 
delicate surfaces.
n ote:  your BISSELL Lift-Off Multi Cyclonic Pet 
vacuum is equipped with a special internal 
switch that turns the rotating brush off   
whenever the unit is in the Upright position.
Handle position
1.  Upright- For storage and above floor clean-
ing with special tools.
2.  normal Cleaning- Press handle release 
pedal once. Use for most household floor 
cleaning tasks.
Assembly
 6www.bissell.com  800.237.7691
Combination 
Tool
Telescoping 
Wand
Crevice Tool
Pet TurboBrush®
CAUTIOn:  Before using your vacuum, make 
sure that both filters (Pre-Motor 
and Post-Motor) are in place. Do 
not operate your vacuum without 
these filters.
Operation
Tip:
Your vacuum features a Quick-Release 
Cord Wrap. To remove the Power Cord 
quickly and easily, rotate the Upper 
Cord Wrap towards floor, and slip Power 
Cord from Upper and Cord Wraps..
Brush
Power
3.
1. 2. 
						

							 7www.bissell.com 800.237.7691
Power height adjustment
The powerfoot on your vacuum can be  
adjusted to clean several floor surfaces.
nOTE:  for optimal cleaning performance, 
adjust to the lowest practical setting. If 
your cleaner is difficult to push, adjust to 
the next higher setting.
1.  Place handle in upright position.
2.  Turn height adjustment knob to desired setting. 
Lowest Setting  – For bare floors.
Medium Settings  – For short and medium  
   pile carpets.
highest Setting  – For plush pile carpet.
nOTE:  you may also adjust the setting while 
in the normal cleaning position.
Special tools
y our vacuum is not only a powerful floor vacuum 
cleaner, it’s also a versatile stairs and above floor 
vacuum when you select one of the special tools.
note: The tools can be used with the   
vacuum in the Upright Position or with the 
Detachable Canister.
1.  Detach the vacuum hose by grasping the 
hose grip and lifting to separate from the 
hose grip base.
2.  Attach tools by firmly pushing onto vacuum 
hose or telescoping extension wand.
Combination dusting brush/upholstery tool:
Two types of cleaning tools are included in one 
attachment. Rotate for desired tool.
■ Use brush side to dust furniture, blinds, books, 
lamps, shelves, and baseboards.
■ Use upholstery side for curtains, draperies, 
cushions, fabrics.
Crevice tool:
Use in tight narrow spaces.
Telescoping extension wand:
Use with desired attachment for a longer reach. To 
extend the wand, twist the collar to “Unlock” posi-
tion and push away from you. Twist the collar to the 
“Lock” position to lock into place. To retract, twist to 
unlock, pull toward you and twist to relock.
Operation
Tip:
Before cleaning under 
low furniture, check 
area first for objects 
that might harm the 
unit or block the 
Vacuum Hose.
 CAUTIOn:   Always place vacuum cleaner on 
floor in its fully Upright Position 
and make sure it is locked into 
place before removing Canister 
or when using tools.  Placing the 
Lift-Off in its full Upright Position 
automatically stops the   
rotating brush.
1. 
						

							Buckle
Special tools continued
Pet TurboBrush®:
Use for removing dirt and pet hair from stairs, 
upholstery, area rugs, and other small areas. Pull 
towards you in a raking motion. 
note: Pet TurboBrush is designed to remove pet 
hair from upholstered or carpeted surfaces. It 
should not be used on pets.
Stair cleaning tool (
select models only):
Use for stairs, area rugs, and other small carpeted 
areas. This tool can also be used for  bare floors.
note: The stair cleaning tool does not   
store on board.
Deluxe bare floor tool (select models):
Use for bare floors. Swivel head turns to get 
into tight spaces and fits under cabinets.
note: The deluxe bare floor tool does not store 
on board.
All items may not be included with your model. 
More tools may be available; to order please 
refer to page 18  .
Shoulder Strap (select models only)  
The Shoulder Strap may be used while cleaning 
with the Detachable Canister.
1.  To attach the shoulder strap, wrap the Velcro 
ends attached to the bottom of the strap 
securely around the canister handle as shown. 
To obtain maximum strength, overlap the loose 
ends completely and press securely in place.
2.  The plastic buckle must be positioned on top of 
the canister handle.
3.  The length of the strap may be adjusted as 
required for comfort.
 8www.bissell.com  800.237.7691
Operation
 nOTICE: While vacuuming, certain  
carpets and low humidity   
conditions may generate small   
static discharges. The  discharges 
are entirely harmless and are not 
associated in any way with the 
main power supply.
CAUTIOn:   Do not press the Release Button 
while using the Carrying  handle to 
transport the vacuum cleaner. The 
Canister could detach causing   
the rest of the vacuum to fall.
1.
2.
CAUTIOn:  To reduce the risk of the shoulder 
strap coming loose in operation 
follow these instructions. 
						

							16www.bissell.com 800.237.7691
Cleaning with the detachable canister
The detachable canister feature makes it 
possible to easily take the powerful cleaning 
action of your BISSELL Lift-Off Multi Cyclonic 
Pet to stairways, auto interiors, and other 
hard-to-reach areas of your home.
Before detaching the canister, your vacuum must 
be in its fully upright position. you do not need to 
turn off the power first. 
1.  Press the release button at the top of the   
canister handle and lift the canister to remove.
2.  Detach the vacuum hose from the hose grip 
base at the back of the canister.
3.  Attach the desired tool(s) to the hose grip at 
the end of the Vacuum Hose.  
4.  When you’re done, remove the tool(s) and   
reconnect the hose to the hose grip base.  
5.  Return the canister to the powerfoot by 
aligning the “feet” on the front with the 
bumps on the foot of the upright vacuum. 
Push the canister toward the vacuum frame 
until it “clicks” into place.
Power cord storage
When you are done using your vacuum, return it to 
the Upright position and store the power cord.
1. Turn vacuum cleaner off (O).
2.  Unplug power cord by grasping the polarized 
plug (NOT the cord) and disconnect from outlet.
3.  Loop power cord around cord wraps on side 
of the canister.
4.  Clip molded plug to power cord to secure.
Transporting Cleaner
1. To move your vacuum cleaner from room to room, 
put the Handle in the Upright Position, tilt the 
cleaner back on its rear wheels and push forward.
2.  The cleaner can also be moved by using   
the Carrying Handle on the Detachable 
Canister.
Operation
 9
CAUTIOn:   While the vacuum is in use, warm air 
is emitted through the Post-Motor 
filter on the back of the Canister. 
The bottom of the Canister may 
also become warm. When using the 
shoulder strap, to avoid discomfort, 
position the Canister so that these 
parts are not directed towards or 
touching your body.
Carrying Handle
1.
1. 2. 
						

							To maintain maximum cleaning performance, the  
following maintenance steps must be performed:
1.  Empty the dirt container when the dirt 
reaches the “Full” line on the front.
2.  Check the pre-motor filter at least once a 
month and clean and replace as needed.
3.  Replace the HEPA media post-motor filter 
every six months.
nOTE: More frequent filter cleaning may be   
necessary if you are vacuuming new carpet, 
fine dust, or have allergy concerns. 
follow the instructions on the following pages 
to perform these simple maintenance steps.
4.  Allow parts to dry completely before   
returning them back into the vacuum.
Empty dirt container
The dirt container needs to be emptied when the 
dirt reaches the “ full” line on the front of the 
container.
1.  Unplug cleaner from electrical outlet.
2.  Slide the Lock ‘n Seal Lever to the “Unlock” 
position.
3.  Grasp handle and pull the dirt container 
straight out to remove from vacuum.
4.  Empty dirt into garbage container.
5.  Put the dirt container back in the vacuum 
and slide the lever to the “Lock” position.
The dirt container may be washed in warm 
water with a mild detergent. Make sure it is 
completely dry before replacing.
10www.bissell.com  800.237.7691
Maintenance and care
Full Line
Lock 
Position
Unlock 
Position
Tip:
For maximum cleaning 
 
performance, check and 
clean or replace all filters   
as suggested.
 
WAR nIn G:   To reduce the risk of electric 
shock, turn Power Switch Off 
and disconnect polarized plug 
from electrical outlet before 
performing maintenance or 
troubleshooting checks.