Bissell 7700 E Manual

USER’S GUIDE
7700 SERIES 220-240V
3
Safety Instructions
Product View
Assembly
Special Features
Operation
Maintenance and Care
Troubleshooting
Consumer Services
4-5
6
7-8
8-13
14-15
16
17
Replacement Parts
18-19
Warranty20
PROheat™ All-Rounder
ug120-4005_7700_607.indd   1ug120-4005_7700_607.indd   16/28/07   10:05:17 AM6/28/07   10:05:17 AM 

2
Thanks for buying a BISSELL PROheat™ All-Rounder
 2www.bissell.com
We’re glad you purchased a BISSELL PROheat All-Rounder cleaning system. 
Everything we know about floor care went into the design and construction 
of this complete, high-tech home cleaning system.
Your PROheat All-Rounder is well made, and we back it with a limited 
two-year warranty. We also stand behind it with a knowledgeable, 
dedicated Consumer Services department, so, should you ever have a 
problem, you’ll receive fast,...

 3www.bissell.com
When using an electrical appliance, basic 
precautions should be observed, including 
the following: 
READ ALL INSTRUCTIONS 
BEFORE USING YOUR 
CLEANING SYSTEM. 
Always connect to a properly Earthed 
outlet. Unplug from outlet when not in 
use and before conducting 
maintenance or troubleshooting. 
     WARNING: To reduce the 
risk of fire, electric shock, or injury:
■
   Use indoors only
■
   Do not immerse
■
   Use only on surfaces moistened by 
cleaning process
■
   Do not leave...

 4www.bissell.com
Optional Accessories:
Air Powered Floor 
TurboBrushMulti-Surface Floor Tool5” Brush Crevice Tool- (works 
for wet cleaning too) Upholstery Dusting Brush
Grip
Some or all of these may have come with your unit. These items are available for purchase. To order replacement parts, additional tools or formulas, 
please refer to page 17-18.
Product view - water  ltrated vacuum mode
4” Upholstery ToolQuick Dry Hard Floor 
Tool (Shown with 
Microfibre Pad)Drain Cleaner
Wand
Air Powered Floor...

 5www.bissell.com
Product view - wet cleaning mode
BISSELL Formulas:
Keep plenty of genuine BISSELL 
deep cleaning formulas on hand 
so you can clean whenever it 
fits your schedule. Always use 
genuine BISSELL deep cleaning 
formulas. Non-BISSELL cleaning 
solutions may harm the machine 
and void the warranty.
These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 17-18.
1.42 L 
Fibre Cleansing Formula™ with 
Scotchgard™ 
protector
1.42 L...

This user’s guide has been designed to help you 
get the utmost satisfaction from your BISSELL 
PROheat All-Rounder. You’ll find assembly and 
operating instructions, safety precautions, 
as well as maintenance and troubleshooting 
instructions. Please read this users guide 
thoroughly before assembling your product. 
Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate 
and organize all parts before assembly. Familiarize 
yourself with the parts and where they...

Your BISSELL PROheat All-Rounder is a 
complete home cleaning system. Not only does 
it come with a lot of unique features, it has been 
designed with you, the customer, in mind.  
Built-in heater
PROheat All-Rounder models all feature a patented 
built-in heater which heats the hot tap water 
you put in it up to 25 degrees hotter to safely 
optimize cleaning effectiveness. The heater will 
never allow the cleaning solution temperature 
to exceed 190 degrees. The heater switch on the 
back of the machine...

Special features of your BISSELL PROheat All-Rounder
Cleaning tools (continued)
Multi-surface floor tool: 
May be used on both carpet/rugs or hard floor 
surfaces. For use on carpets, make sure the tab 
is in the down position               . This will hide 
the soft outer brushes. For hard floor surfaces, 
press the opposite tab in the down position
              . This will engage the soft outer brushes. 
Crevice tool: May be used for both dry 
vacuuming or wet cleaning. 
NOTE: In wet cleaning mode the...

Getting Ready (continued)
3. Remove the collection tank from the unit by 
opening the Quick Release Hose Door and 
lifting the tank straight up by the handle.
4. Remove the top lid from the collection tank 
and set aside.
5. Fill the collection tank to the fill line (located 
on side of tank) with clean, cold water.
6. Replace the top lid back onto the top of the 
collection tank
7. Set the collection tank back in the machine 
8. Select WATER FILTER VACUUM with the 
mode selector. 
9. Close the Quick...

 10www.bissell.com
Getting ready to wet clean
NOTE: Remove tool caddy if in place.
1.  Attach the desired wet cleaning tool to end 
of wand or grip.
2.  Open the Quick Release™ Hose Door and 
select “WET CLEAN” with the mode selector.
3.  Place the clean solution tank on a 
flat surface.
4.  Fill the solution tank by first unscrewing the 
measuring cap. Always use genuine BISSELL 
formulas to maximize cleaning and for the 
safety of your machine. Fill tank to fill line with 
hot tap water. Add two full...