Home > Bissell > Vacuum Cleaner > Bissell 3760-4 User Manual

Bissell 3760-4 User Manual

Here you can view all the pages of manual Bissell 3760-4 User Manual. The Bissell manuals for Vacuum Cleaner are available online for free. You can easily download all the documents as PDF.

Page 11

Use only BISSELL Style 8 Replacement Filters in your 
BISSELL Lift-Off Spinpower.
Unplug the vacuum from electrical outlet.
The Pre-Motor Filter protects the motor from dirt particles. It 
is located in the slide out tray underneath the Dirt Container. 
If the Filter becomes dirty, pull out the tray, lift out the Filter 
and clean. This Filter may be hand washed in cold water 
with mild detergent. Rinse well and air dry thoroughly 
before replacing.
The HEPA Media Post-Motor Filter assists in the...

Page 12

Place one end of the new Drive Belt over Motor Pulley and the 
other end over the Brush in the space between the bristles.
Pull the Brush firmly to stretch the Drive Belt and place ends 
of Brush down into slots on sides as shown. Turn Brush 
several times by hand to center the Drive Belt.
Reposition Brush Cover and screws. Tighten 
screws securely.
Select Models Only
The TurboBrush should be checked regularly for clogs 
or debris wrapping around the Brush Roll.
Unplug vacuum from electrical outlet.
If a...

Page 13

Low suction or poor pickup may be due to a clog 
in the vacuum cleaner. If you notice a change in 
the sound of the motor or a reduction in the 
spinning action, check for clogs.
Unplug cleaner from electrical outlet.
Empty Dirt Container.
Check Upper Tank for build up or clogs.
Remove the Upper Tank and check the suction inlet for 
a clog.
Grasp the Hose Grip and lift to separate from the suction 
opening. Check for a clog in the Base or the Hose.
Release the Twist n Snap hose from the vacuum by...

Page 14

Vacuum cleaner won’t run
Possible Causes Remedies
 Power cord not plugged in    Check electrical plug
  Thermal protector activated    Allow cleaner to cool for 30 minutes,
       see pg. 13
No Power at Rotating Floor Brush
Possible Causes Remedies
 Cylinder is not securely seated   Remove Cylinder and replace, making
      sure that it “clicks” into place
  Brush Switch turned to “Off”    Make sure Brush Switch is in “On” position
  Vacuum is in Upright Position   Recline vacuum to operate brush 
Vacuum...

Page 15

15
Replacement Parts – BISSELL Lift-Off Spinpower Series
BISSELL Consumer Services
1234567
Item  Part No.  Part Name
 1    3200  Style 8 Drive Belt (2-Pack)
 2    203-1063   Crevice Tool
 3    203-1099  Dusting Brush/Upholstery Tool 
 4    203-6624  Stair Cleaning Tool (Select Models) 
 5    203-6830  Metal Telescoping  Extension Wand
 6    203-6831  Deluxe Bare Floor Tool - Bali Blue (Select Models)
 7    203-1227  TurboBrush (Select Models)
 8    203-2082   Bracket Assembly for TurboBrush (Select...

Page 16

Warranty
16
  This warranty gives you specific legal rights, and you may also have other rights which may vary 
from country to country. If you need additional instruction regarding this warranty or have questions 
regarding what it may cover, please contact BISSELL Consumer Services by telephone, or regular post as 
described below, or contact your local in country distributor.
  Limited Two Year Warranty
 Subject to the *EXCEPTIONS AND EXCLUSIONS identified below, BISSELL Homecare, Inc., will replace...
Start reading Bissell 3760-4 User Manual

Related Manuals for Bissell 3760-4 User Manual

All Bissell manuals