Bissell 3760-4 User Manual

							USER’S GUIDE
3760 SERIES 220-240V
Safety Instructions3
Product Diagram4
Assembly Instructions4-6
Operation / Special Tools6-9
Maintenance10-13
Troubleshooting14
Warranty16
Replacement Parts15
Consumer Services15
ug603-5570_3760E_1105.indd   1ug603-5570_3760E_1105.indd   12/2/06   4:12:08 PM2/2/06   4:12:08 PM 
						

							2
Thanks For Buying A BISSELL Lift-Off™ Spinpower
We’re glad you purchased a BISSELL Lift-Off Spinpower vacuum. 
Everything we know about floor care went into the design and construction 
of this powerful, high-tech home vacuuming system.
Your BISSELL Lift-Off Spinpower vacuum is well made, and we back it with 
a limited comprehensive two-year warranty. We also stand behind it with a 
knowledgeable, dedicated Consumer Services department, so, should you 
ever have a problem, you’ll receive fast, considerate assistance.  
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL 
is a global leader in the design, manufacture, and service of high quality 
homecare products like your BISSELL Lift-Off Spinpower vacuum.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
ug603-5570_3760E_1105.indd   2ug603-5570_3760E_1105.indd   22/2/06   4:12:09 PM2/2/06   4:12:09 PM 
						

							3
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, 
basic precautions should be observed, 
including the following:
READ ALL INSTRUCTIONS 
BEFORE USING YOUR 
UPRIGHT VACUUM. 
WARNING: To reduce 
the risk of fire, electric shock, 
or injury:
 
■    
Use indoors only.
■  Do not leave machine when it is plugged in.
■  Do not use with damaged cord or plug.
■  If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped into 
water, return it to a service agent.
■  Do not handle unit with wet hands.
■  Do not pull or carry by cord, use cord as a handle, 
close door on cord, pull cord around sharp 
corners or edges, run appliance over cord, or 
expose cord to heated surfaces.
■  Do not unplug by pulling on cord. Unplug by 
grasping plug.
■  Do not run appliance over cord.
■  Do not handle plug or appliance with wet hands.
■  Do not expose hair, loose clothing, fingers or 
body parts to openings or moving parts.
■  Do not pick up hot or burning objects such as 
cigarettes, matches, or hot ashes.
■  Do not pick up flammable or combustible materials 
(lighter fluid, petrol, kerosene, etc.) or use in the  
presence of explosive liquids or vapour.
■  Do not use appliance in an enclosed space filled 
with vapours given off by oil base paint, paint 
thinner, some moth proofing substances, flam-
mable dust, or other explosive or toxic vapours.
■  Not intended for use by young children or infirm 
persons without supervision.
■
  Young children should be supervised to ensure that 
they do not play with the appliance.
■  Remove plug from electrical outlet before clean-
ing or maintaining the appliance.
■  If the supply cord is damaged, it must be 
replaced by the manufacturer or its service 
agent in order to avoid a hazard.
■  Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, petrol, etc.).
■  Do not allow to be used as a toy.
■  Do not use for any purpose other than 
described in this User’s Guide.
■  Use only manufacturer’s recommended attachments.
■  Do not use with any opening blocked; keep 
free of dust, lint, hair, and anything that may 
reduce air flow.
■  Keep appliance on a level surface.
■  Turn off all controls before unplugging.
■  Be extra careful when cleaning stairs.
■  This appliance is provided with double 
insulation. Use only identical replacement 
parts.
■  Do not use without debris tank and/or filters 
in place.
■  Pay close attention when working 
around children.
SAVE THESE  
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY.
IMPORTANT FOR OPERATION ON A 220-240 VOLT A.C. 50/60 
Hz POWER SUPPLY ONLY. 
FOR RESIDENTS OF THE 
UNITED KINGDOM ONLY
If your appliance is fitted with a nonrewireable 
BS 1363 plug it must not be used unless a 13 
amp (ASTA approved to BS 1362) fuse is fitted in 
the carrier contained in the plug. (Spares may be 
obtained from your BISSELL supplier). If for any 
reason the plug is cut off, it must be disposed 
of, as it is an electric shock hazard should it be 
inserted into a 13 amp socket. 
ug603-5570_3760E_1105.indd   3ug603-5570_3760E_1105.indd   32/2/06   4:12:10 PM2/2/06   4:12:10 PM 
						

							4
 CAUTION: Do not plug in your vacuum 
cleaner until you are familiar 
with all instructions and 
operating procedures.
Power Switch
Crevice ToolHandle
Quick Release 
Cord Wrap
Handle Release 
Pedal
PowerfootStretch Hose 
Power Cord
Furniture 
Protection 
Guard Height 
Adjustment 
KnobUpper Tank
Dirt 
Container
Pre-Motor 
FilterLock ’n Seal™ 
 
Lever
Metal 
Telescoping 
Extension Wand Upper Tank Knob
Cord Clip
HEPA Media  
Post-Motor Filter
Hose Grip BaseLouvers/Filter 
Frame
Upper Tank Filter 
(Inside Louvers)
Dusting Brush/ 
Upholstery Tool
Comfort Grip
Hose Clip
Hose Grip Brush On/Off  
Switch Release Button
Detachable Cylinder
Clean Filter 
Indicator (Select 
Models Only) Twist n Snap
™ 
Hose Connection
Dust Chamber 
with Screens
ug603-5570_3760E_1105.indd   4ug603-5570_3760E_1105.indd   42/2/06   4:12:10 PM2/2/06   4:12:10 PM 
						

							How To Use This Guide
This User’s Guide has been designed to help 
you get the most satisfaction from your BISSELL 
Lift-Off Spinpower vacuum. You’ll find assembly and 
operating instructions, safety precautions, as well as 
maintenance and troubleshooting instructions. Please 
read this Users Guide thoroughly before assembling 
your vacuum cleaner. 
Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate and 
organize all parts before assembly. Familiarize yourself 
with the parts and where they fit. Following this User’s 
Guide will greatly enhance your ability to get the most 
performance from your BISSELL Lift-Off Spinpower 
vacuum for many years.
The only tool you’ll need to assemble your vacuum 
cleaner is a screwdriver.
Locate the vacuum Handle and remove the screw 
packet taped to the base of the Handle.
Stand the vacuum upright and slide the base of 
the Handle firmly into the grooves at the top of the 
vacuum body.
Check to be sure the Handle is fitted to the vacuum 
body. If there is a gap in front, continue to push firmly 
until the Handle is flush.
Insert the two screws from the screw packet into the 
existing holes. Tighten securely with a screwdriver.
Position the Twist ‘n Snap
™ Hose assembly on the 
vacuum and line up the tabs on the base of the hose 
with the corresponding notches. Turn the Twist ‘n Snap 
Hose to the right to lock into place.
Slide the end of the Hose Grip onto the Hose Grip Base. 
Place the Hose into the Hose Clip.
NOTE: The Powerfoot will not operate effectively 
unless the Hose is firmly attached to the base.
1.
Attach Handle To Vacuum
5
How To Put It Together
2.
3.
4.
Attach Vacuum Hose and Tools
1.
 WARNING: Plastic film can be 
dangerous. To avoid danger 
of suffocation, keep away 
from babies and children.
2.
ug603-5570_3760E_1105.indd   5ug603-5570_3760E_1105.indd   52/2/06   4:12:11 PM2/2/06   4:12:11 PM 
						

							Snap the Metal Telescoping Extension Wand, Crevice 
Tool, and Combination Tool into storage clips as shown.
On Board TurboBrush
™ (Select Models Only)
The TurboBrush Bracket slides onto the Hanger on 
the front of the Handle.  Attach the Bracket by 
aligning the slots with the rectangular part on the 
Hanger as shown and pulling down until it is locked 
into place.
Note: If you do not wish to store the TurboBrush 
on your Lift-Off vacuum, the Bracket may be 
hung on a wall for storage and the Hanger may 
be removed from the vacuum.
Place the TurboBrush in the Bracket by aligning 
the small holes near the brush roll with the tabs 
at the bottom of the Bracket and snap the TurboBrush 
into place.
The Power Switch is located just below the handle 
on the front of the Detachable Cylinder. Push the 
rocker switch “ON” (I) to vacuum, and “OFF” (O) 
when cleaning is complete.
The Brush Switch is located just below the handle 
on the front of the Detachable Cylinder next to 
the Power Switch. This switch turns the Rotating 
Brush on and off.  The Brush Switch should be in 
the “ON” (I) position for normal carpet cleaning.  
You may want to turn the Brush Switch “OFF” (O) 
for bare floor cleaning or other delicate surfaces.
Note: Your BISSELL Lift-Off Spinpower vacuum 
is equipped with a special internal switch that 
turns the Rotating Brush off whenever the unit is 
in the Upright Position.
Upright – For storage and above floor cleaning with tools.
Normal Cleaning – Press the Handle Release Pedal 
with your foot to recline.
3.
Attach Vacuum Hose and Tools Continued
6
4.
Power Switch/Brush Switch
1.
2.
Combination 
Tool
Metal 
Telescoping 
Extension 
Wand
Crevice Tool
 CAUTION: Before using your vacuum, make 
sure that the Dirt Container and 
Upper Tank are in locked position 
and that all Filters (Upper Tank, 
Pre-Motor and Post-Motor) are 
in place. Do not operate your 
vacuum without these Filters.
Handle Positions
Brush
Power
Tip:
Your vacuum features a Quick-Release 
Cord Wrap. To remove the Power Cord 
quickly and easily, rotate the Upper Cord 
Wrap towards floor, and slip Power Cord 
from Upper and Lower Cord Wraps.
How To Use Your Lift-Off Spinpower
TurboBrush™
ug603-5570_3760E_1105.indd   6ug603-5570_3760E_1105.indd   62/2/06   4:12:12 PM2/2/06   4:12:12 PM 
						

							The Powerfoot on your BISSELL Lift-Off Spinpower 
vacuum can be adjusted to clean several floor surfaces.
NOTE: For optimal cleaning performance, adjust to 
the lowest practical setting.  If your cleaner is 
difficult to push, adjust to the next higher setting.
Place Handle in Upright Position.
Turn Height Adjustment Knob to desired setting. 
Lowest Setting  – For bare floors.
Medium Settings  – For short and medium
  pile carpets.
Highest Setting  – For plush pile carpet.
NOTE: You may also adjust the setting while in the Normal 
Cleaning Position.
Your BISSELL Lift-Off Spinpower vacuum is not only 
a powerful floor vacuum cleaner, it’s also a versatile 
stairs and above floor vacuum when you select one of 
the special tools.
Note: The tools can be used with the 
vacuum in the Upright Position or with the 
Detachable Cylinder.
Detach the Vacuum Hose by grasping the Hose Grip and 
lifting to separate from the Hose Grip Base.
Attach tools by firmly pushing onto Vacuum Hose or Metal 
Telescoping Extension Wand.
Combination Dusting Brush/Upholstery Tool:
Two types of cleaning tools are included in one attachment; 
rotate for desired tool.
■ Use Brush side to dust furniture, blinds, books, lamps, 
shelves, and baseboards.
■ Use Upholstery side for curtains, draperies, cushions, 
and fabrics.
Crevice Tool:
Use in tight narrow spaces.
Metal Telescoping Extension Wand:
Use with desired attachment for a longer reach. 
To extend the Wand, grasp the collar and push away 
from you. The collar will automatically lock into place. To 
retract, pull the collar toward you. The collar will 
automatically relock.
Stair Cleaning Tool (Select Models):
Use for stairs, area rugs, and other small carpeted areas.
This tool can also be used for bare floors.
Note: The Stair Cleaning Tool does not store on board.
1.
Power Height Adjustment
7
Tip:
Before cleaning under 
low furniture, check 
area first for objects 
that might harm the 
unit or block the 
Vacuum Hose.
Special Tools
2.
1.
2.
 CAUTION: Always place vacuum cleaner on 
floor in its fully Upright Position 
and make sure it is locked into 
place before removing Cylinder 
or when using tools.  Placing 
the Lift-Off Spinpower in its full 
Upright Position automatically 
stops the rotating brush.
 ATTENTION  BERBER 
CARPET OWNERS:
 Some Berber Carpets have a tendency 
to fuzz with wear. Repeated passes 
with your vacuum over the same area 
may aggravate this condition. Consider 
using the highest height setting or 
turning off the Rotating Brush for this 
type of carpet.
ug603-5570_3760E_1105.indd   7ug603-5570_3760E_1105.indd   72/2/06   4:12:13 PM2/2/06   4:12:13 PM 
						

							TurboBrush™ (Select Models):
Use rotating brush action for small areas such as stairs 
and upholstery. 
Note: Press gently when using TurboBrush to gain 
maximum cleaning. Too much pressure could cause 
the brush to stop rotating.
Deluxe Bare Floor Tool (Select Models):
Use for bare floors. Swivel head turns to get into tight 
spaces and fits under cabinets.
Note: The Deluxe Bare Floor Tool does not store 
on board.
All items may not be included with your model. More 
tools are available; to order please refer to page 15 .
The Detachable Cylinder feature makes it possible 
to easily take the powerful cleaning action of your 
BISSELL Lift-Off Spinpower to stairways, auto interiors, 
and other hard-to-reach areas of your home.
Before detaching the Cylinder, your vacuum must be 
in its fully Upright Position. You do not need to turn 
off the power first. 
Press the Release Button at the top of the Cylinder 
Handle and lift the Cylinder to remove.
Detach the Vacuum Hose from the Hose Grip Base at 
the back of the Cylinder.
Attach the desired tool(s) to the Hose Grip at the end of 
the Vacuum Hose.  
When you’re done, remove the tool(s) and reconnect the 
Hose to the Hose Grip Base.  
Return the Cylinder to the Powerfoot by aligning the 
“feet” on the front with the bumps on the foot of the 
upright vacuum. Push the Cylinder toward the vacuum 
frame until it “clicks” into place.
Select Models Only
The Clean Filter Indicator tells you when airflow in 
the vacuum is reduced due to dirty Filters or a clog 
in the hose. The Clean Filter Indicator will remain 
green until the airflow is reduced. At that time, it 
begins to change to red. When it is fully red, the 
airflow is significantly reduced or blocked. Follow 
the steps on pages 10 -11 to clean your Filters. 
All Filters in the vacuum should be cleaned or 
replaced when the Clean Filter Indicator turns red.
If the indicator remains red after all Filters have 
been cleaned, follow the steps on page 13 to 
check for and clear clogs. 
1.
Cleaning With The Detachable Cylinder
8
2.
3.
4.
Release 
Button
NOTICE: While vacuuming, certain 
carpets and low humidity 
conditions may generate small 
static discharges. The discharges 
are entirely harmless and are not 
associated in any way with the 
main power supply.
5.
Special Tools Continued
Clean Filter Indicator
ug603-5570_3760E_1105.indd   8ug603-5570_3760E_1105.indd   82/2/06   4:12:15 PM2/2/06   4:12:15 PM 
						

							9
Select Models Only
The Shoulder Strap may be used while cleaning with the 
Detachable Cylinder.
To attach the Shoulder Strap, wrap the Velcro ends attached to the 
bottom of the strap securely around the Cylinder handle as shown. 
To obtain maximum strength, overlap the loose ends completely 
and press securely in place.
The plastic Buckle must be positioned on top of the Cylinder 
Handle as shown in the illustration.
The length of the strap may be adjusted as required for comfort.
When you are done using your BISSELL Lift-Off 
Spinpower vacuum, return it to the Upright Position 
and store the Power Cord.
Turn vacuum cleaner off (O).
Unplug Power Cord by grasping the plug 
(NOT the cord) and disconnect from outlet.
Loop Power Cord around Cord Wraps on side of 
the Cylinder.
To move your vacuum cleaner from room to room, put the 
Handle in the Upright Position, tilt the vacuum back on its 
rear wheels and push forward.
The vacuum can also be moved by using the Carrying 
Handle on the Detachable Cylinder.
Transporting Cleaner
Carrying Handle
 CAUTION: Do not press the Release Button 
while using the Carrying Handle to 
transport the vacuum cleaner. The 
Cylinder could detach causing 
the rest of the vacuum to fall.
Power Cord Storage
1.
2.
2.
3.
1.
 CAUTION: While the vacuum is in 
use, warm air is emitted 
through the Post-Motor 
Filter on the back of the 
Cylinder. The bottom of the 
Cylinder may also become 
warm. When using the 
Shoulder Strap, to avoid 
discomfort, position the 
Cylinder so that these 
parts are not directed 
towards or touching 
your body.
Shoulder Strap
2.
1.
3.
 CAUTION: To reduce the risk of the Shoulder 
Strap coming loose in operation, 
follow these instructions.
Buckle
ug603-5570_3760E_1105.indd   9ug603-5570_3760E_1105.indd   92/2/06   4:12:16 PM2/2/06   4:12:16 PM 
						

							Upper 
Tank 
Knob
To maintain maximum cleaning performance, the 
following maintenance steps must be performed:
Empty the Dirt Container when the dirt reaches the “Full” line 
on the front.
Check the Upper Tank and Pre-Motor Filters at least once a 
month and clean and replace as needed.
Replace the HEPA Media Post-Motor Filter every six months.
NOTE: More frequent Filter cleaning may be necessary 
if you are vacuuming new carpet, fine dust, or have 
allergy concerns. 
Follow the instructions on the following pages to 
perform these simple maintenance steps.
The Dirt Container needs to be emptied when the dirt 
reaches the “Full” line on the front of the Container.
Unplug cleaner from electrical outlet.
Slide the Lock ‘n Seal Lever to the “Unlock” position.
Grasp handle and pull the Dirt Container straight out to 
remove from vacuum.
Empty dirt into garbage container.
Put the Dirt Container back in the vacuum and slide the lever 
to the “Lock” position.
Note: The Screens may also be removed from the side Dust 
Chambers when you empty or clean the Dirt Container. The 
Screens are made to fit each Dust Chamber. If they do not 
slide down completely, try in the opposite Dust Chamber. 
The Screens will also not fit if there is debris in the track. 
The Dirt Container and Screens may be washed in warm 
water with a mild detergent. Make sure they are completely 
dry before replacing.
Use only BISSELL Style 8 Replacement Filters in your 
BISSELL Lift-Off Spinpower.
Unplug the cleaner from electrical outlet.
The Upper Tank Filter can be reached by removing the Dirt 
Container, reaching underneath the Upper Tank and turning the 
rim of the Filter Frame to unlock. Pull straight down to remove. 
Brush the dirt off the Louvers and Upper Tank Filter.
The foam Upper Tank Filter may be removed and hand washed 
in cold water with mild detergent. Rinse well then air dry 
thoroughly before replacing.
The Upper Tank and Louvers may also be wiped clean with a damp cloth.
Note: For easier access, the entire Upper Tank may be 
removed by turning the knob on the back of the cleaner to 
unlock and pulling the entire tank straight out
.
Full Line
Lock 
Position Unlock 
Position
5.
1.
2.
3.
4.
Cleaning The Upper Tank & Filter
1.
2.
3.
10
4.
Screen
Empty Dirt Container
How to Maintain Your BISSELL Lift-Off Spinpower
Tip:
For maximum cleaning 
performance, check and 
clean or replace all Filters 
as suggested.
 WARNING: To reduce the risk of electric 
shock, turn Power Switch 
OFF and disconnect plug 
from electrical outlet before 
performing maintenance or 
troubleshooting checks.1.
2.
3.
ug603-5570_3760E_1105.indd   10ug603-5570_3760E_1105.indd   102/2/06   4:12:17 PM2/2/06   4:12:17 PM