Bissell 25a3c Manual

							USER’S GUIDE
25A3/64D9 SERIES
3Safety Instructions
Product View
Special Features Assembly
Operation
Maintenance and Care
Troubleshooting
Consumer Services
 Additional Accessories Replacement Parts
4-5
7-8 6
9-14
15
16-17
18
19
18
Warranty
20
PROheat
® 
ug120-4078_25A3_908.indd   110/14/08   1:20:49 PM 
						

							2
Thank you for buying a BISSELL ProHeat deep cleaner 
 2www.bissell.com 800.237.7691
We’re glad you purchased a BISSELL ProHeat deep cleaner. Everything we  
know about floor care went into the design and construction of this complete, 
high-tech home cleaning system.  By purchasing this product you are helping 
BISSELL with our commitment to reducing our impact on the environment through 
an expanding range of sustainable design efforts.
Your ProHeat deep cleaner is well made, and we back it with a limited one-year   
warranty. We also stand behind it with a knowledgeable, dedicated Consumer 
Services department, so, should you ever have a problem, you’ll receive fast,   
considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a 
global leader in the design, manufacture, and service of high quality homecare 
products like your deep cleaner.
Thanks again, from all of us at BISSELL. 
Mark J. Bissell
President and Chief Executive Officer
ug120-4078_25A3_908.indd   210/14/08   1:20:50 PM 
						

							 3www.bissell.com 800.237.7691
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions 
should be observed, including the following: 
Read  all instructions  before using your  ProHeat
®
    
  WARNING:
 To reduce the risk 
of fire, electric shock, or injury:
■  Do not immerse. 
■  Use only on surfaces moistened by cleaning process. 
■  Always connect to a properly grounded outlet.
■  See Grounding Instructions.
■  Unplug from outlet when not in use and before   
conducting maintenance or troubleshooting. 
■  Do not leave machine when it is plugged in.
■   Do not service machine when it is plugged in.
■  Do not use with damaged cord or plug.
■  If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped into 
water, have it repaired at an authorized Service Center.
■  Use indoors only. 
■    Do not pull or carry by cord, use cord as a handle, close 
door on cord, pull cord around sharp corners or edges, run 
appliance over cord, or expose cord to heated surfaces.
■  Unplug by grasping the plug, not the cord.
■   Do not handle plug or appliance with wet hands.
■   Do not put any object into appliance openings, use with 
blocked opening, or restrict air flow.
■ 	
  Do not expose hair, loose clothing, fingers or body 
parts to openings or moving parts.
■  Do not pick up hot or burning objects.
■   
Do not pick up flammable or combustible materials 
(lighter fluid, gasoline, kerosene, etc.) or use in the   
presence of explosive liquids or vapor.
■    Do not use appliance in an enclosed space filled with vapors  
given off by oil base paint, paint thinner, some moth proofing  
substances, flammable dust, or other explosive or toxic vapors.
■    Do not pick up toxic material (chlorine bleach,   
ammonia, drain cleaner, gasoline, etc.).
■   
Do not modify the 3-prong grounded plug.
■  Do not allow to be used as a toy.
■   
Do not use for any purpose other than described in 
this User’s Guide.
■   Do not operate the appliance unless the belt door is 
securely assembled in the location provided.
■  Do not unplug by pulling on the cord.
■  Use only manufacturer’s recommended attachments.
■   Use only cleaning products formulated by BISSELL for 
use in this appliance to prevent internal component 
damage. See the cleaning fluid section of this guide.
■  Keep openings free of dust, lint, hair, etc.
■  Do not point attachment nozzle at people or animals
■  Keep appliance on a level surface. ■
 Turn off all controls before unplugging.
■  Be extra careful when cleaning stairs.
■  Close attention is necessary when used by or   
near children.
■  Unplug before attaching the TurboBrush
®
SAVE THESE 
INSTRUCTIONS.
  THIS moDEL  IS foR HoUSEHoLD  USE onLy. 
  Commercial use of this unit voids the   
  manufacturer’s warranty.
GROUNDING INSTRUCTIONS
This appliance must be connected to a grounded 
wiring system. If it should malfunction or break 
down, grounding provides a safe path of least 
resistance for electrical current, reducing the risk of 
electrical shock. The cord for this appliance has an 
equipment-grounding conductor and a grounding 
plug. It must only be plugged into an outlet that is 
properly installed and grounded in accordance with 
all local codes and ordinances.
 
    WARNING:
 Improper   
connection of the equipment-grounding   
conductor can result in a risk of electrical 
shock. Check with a qualified electrician 
or service person if you aren’t sure if the 
outlet is properly grounded. DO NOT MODIFY 
THE PLUG. If it will not fit the outlet, have a 
proper outlet installed by a qualified electri-
cian. This appliance is designed for use on a 
nominal 120-volt circuit, and has a ground-
ing attachment plug that looks like the plug 
in the drawing above. Make certain that the 
appliance is connected to an outlet having 
the same configuration as the plug. No plug 
adapter should be used with this appliance.
Grounded Outlets
Grounding Pin
ug120-4078_25A3_908.indd   310/14/08   1:20:50 PM 
						

							 4www.bissell.com 800.237.7691
Product view
Dirtlifter® PowerBrush
Belt Access Door
Ready Tools
™ Dial
Removable Nozzle
Ergonomically 
Designed Handle
Handle Assembly
Lower Body Assembly
Heater Switch:
 
turn heat on or off   
as needed
Edge Sweep® Brushes Integrated Carry Handle
Heat Indicator 
 
Light/Built-in   
Hot Water Heater Tough Stain Tool 
Made from 100% 
 
Post Consumer Recycled 
Materials
Mesh Tool Bag 
(bag only)
Optional Accessories:
Spraying Crevice Tool 2 in 1 Crevice Tool
3” Tough Stain Brush
4” Upholstery Tool 6”
 Stair ToolTurboBrush®Hard Floor Attachment
These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 18-19.
ug120-4078_25A3_908.indd   410/14/08   1:20:52 PM 
						

							5www.bissell.com 800.237.7691
Product view
48 oz. BISSELL 
Fiber Cleansing Formula™ with 
Scotchgard™ 
Protector 
item # 0710
48 oz. BISSELL 
Multi- Allergen 
Removal
™ Formula™ with 
Scotchgard™ 
Protector
item # 0720
48 oz. BISSELL 
Pet Odor and   
Soil Removal
™ 
Formula with 
Scotchgard™ 
Protector
item # 0730
48  oz.  BISSELL 
Natural Orange 
Extract Formula  
with Scotchgard
™   
Protector
item # 0740
32 oz.   
BISSELL 
Hard Floor 
Solutions
™
Formula
item #   
0482 22 oz. 
 
BISSELL 
Tough Stain 
PreCleaner
™
item # 
0400
48 oz. BISSELL 
Lavender Essence 
Formula
 
with 
Scotchgard
™ 
Protector
item # 0750
42.67 oz. BISSELL   
3X Concentrated 
Fiber Cleansing 
Formula with 
Scotchgard
™ 
Protector
item # 0716
Quick Release™ Cord Wrap
Extra Long Power Cord
Spray Trigger
Keep plenty of genuine BISSELL Fiber Cleansing Formula
™ on hand so you can clean and protect 
whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas.  Non-BISSELL 
cleaning solutions may harm the machine and will void the warranty.
WARNING:   To reduce the risk of fire 
and electric shock due  
to internal component 
damage,  use only BISSELL 
cleaning fluids intended 
for use with the deep 
cleaner.  Non-BISSELL 
cleaning solutions may 
harm the machine and 
void the warranty.
Large, Easy-To-Maneuver   
Wheels
Ready-to-use Hose
Hose Secure Latch
Spraying Crevice Tool 
Made from 100% Post 
Consumer Recycled Materials 
(select models only)
Handle Release Power Switch
2-in-1 Tank
™ includes built in 
formula measuring cup
Cord Clip
Cleaning fluid:
ug120-4078_25A3_908.indd   510/14/08   1:20:56 PM 
						

							6www.bissell.com 800.237.7691
This user’s guide has been designed to help 
you get the maximum satisfaction from your 
BISSELL deep cleaner. You’ll find assembly 
and operating instructions, safety precautions, 
as well as maintenance and troubleshooting 
instructions. Please read this user’s guide 
thoroughly before assembling your deep 
cleaner. 
Your deep cleaner comes in four easy to  
assemble components:
•	 Handle	 assembly
•	 Upper	 hose	rack
•	 Lower	 body	assembly
•	 Lower	 hose	rack
Four Phillips      head screws are included, 2 long 
and 2 short. They can be found taped to the 
handle assembly.
The only tool you will need to assemble your 
cleaner is a Phillips head screwdriver.
1.  Slide handle assembly onto lower body 
and secure with two long screws.
2.  Attach upper hose rack to back of handle 
assembly by pushing into open slots and 
sliding down until it snaps into place.
3.  Attach lower hose rack by sliding in place 
on lower body assembly and securing with 
2 short screws.  
4.  Attach Tough Stain tool to end of hose.
5.  Wrap flex hose around hose rack and secure 
it into notched out holder as shown.  
6.  Keep flex hose locked in place with hose 
secure latch.
How to use this guide
Assembly
WARNING:   
Do not plug in your cleaner 
until you have completely 
assembled it per the   
instructions and are familiar 
with all instructions and 
operating procedures.
Tip: Deep cleaning carpeting 
regularly can reduce dust and allergens 
in your home.
1.
2. 3. 4.
5. 6.
Hose  
Secure 
Latch
ug120-4078_25A3_908.indd   610/14/08   1:20:59 PM 
						

							7www.bissell.com 800.237.7691
Your BISSELL deep cleaner is a home cleaning 
system that uses a combination of heat, BISSELL 
advanced cleaning formula, brush agitation and 
suction to safely clean carpets.
Built-In-Heater
BISSELL ProHeat models all feature a patented 
built-in heater which will heat the hot tap water 
you put in up to 25 degrees hotter to safely  
optimize cleaning effectiveness. The heater 
will never allow the temperature to exceed 180 
degrees. The heater switch, which is located on 
the side of the machine, controls the heater so 
you have the option to turn off the heat if you are 
cleaning delicate wool or oriental rugs. 
DirtLifter® PowerBrush
The DirtLifter PowerBrush is designed to   
enhance cleaning performance. The bristle   
pattern safely lifts out the deep down dirt while 
gently grooming carpet fibers. The floating 
suspension self-adjusts to all carpet heights. 
When the power is ON and the machine is in 
the upright position, your carpet is protected 
because the brushes are lifted up off the carpet.
Ready Tools™ Dial
The Ready Tools feature allows you to choose 
between FLOOR CLEANING or cleaning with 
TOOLS simply by turning the dial. The TOOLS   
setting allows for above floor cleaning of   
upholstery, stairs, along baseboards, and other 
hard to reach areas. Simply choose the tool that 
is appropriate for the job, attach to flex hose and 
you are ready to go.
Special features of your BISSELL  ProHeat deep cleaner
W ARNING:
To reduce the risk of fire, use only BISSELL advanced deep  
cleaning formula for full size machines in your deep cleaner. 
Use of cleaning formulas that contain lemon or pine oil may 
damage this appliance and void the warranty. Chemical spot  
cleaners or solvent-based soil removers should not be used. 
These products may react with the plastic materials used in 
your deep cleaner  causing cracking or pitting. 
ReadyTools™ Dial
Heater 
Switch
ug120-4078_25A3_908.indd   710/14/08   1:21:00 PM 
						

							8www.bissell.com 800.237.7691
Scotchgard™ Protector
Carpet protection applied at the mill typically 
wears down over time from heavy foot traffic  
and everyday cleaning, including deep cleaning.   
To help restore this important protection, only 
BISSELL offers deep cleaning formulas with 
Scotchgard protector. This offers extra protection 
against dirt and tough stains to keep your carpets 
looking good longer. 
To maintain your Scotchgard 5-year limited stain 
warranty, you no longer are required to hire a   
professional. By using your BISSELL ProHeat 
machine with BISSELL formulas containing 
Scotchgard protector every 12 months, your carpet 
warranty from 3M remains in effect. No other home 
deep cleaning system can do this for you.
Measuring cup
Your deep cleaner is equipped with a measuring 
cup for adding the proper amount of formula to 
the 2-in-1 tank.  For convenience the measuring 
cup is built into the lid of the 2-in-1 tank.
2-in-1 water tank
Our 2-in-1 water tank system is designed with a 
heavy duty bladder inside for clean water. As you 
clean, the clean water and formula in the bladder 
will empty. Dirty water pulled out of your carpet 
will collect around the outside of the bladder so 
clean and dirty water are always kept separate. 
This allows the user to maximize tank space, yet 
only carry one tank to and from the sink for emp-
tying and filling.
Removable Nozzle
Cleaning up your machine after you're done has 
never been easier! Nozzle pops off for rinsing in 
the sink.
Special features of your BISSELL  ProHeat deep cleaner
Measuring Cup
Carry Handle
ug120-4078_25A3_908.indd   810/14/08   1:21:02 PM 
						

							16www.bissell.com 800.237.76919www.bissell.com 800.237.7691
ATTENTION:  Some Berber carpets have a tendency to fuzz with wear. 
Repeated strokes in the same area with an ordinary 
vacuum or deep cleaner may aggravate this condition. 
Before you clean
1. Plan activities to give your carpet time to dry.
2.  Move furniture to another area if cleaning 
an entire room (optional).
3.  Vacuum area with a dry vacuum cleaner 
before deep cleaning.
4.  Plan your cleaning route to leave an exit path. It 
is best to begin cleaning in the corner farthest 
from your exit.  
5.  Pretreating (optional)
Pretreating is recommended to improve cleaning 
effectiveness for heavily soiled carpet in high traffic 
areas such as entry ways and hallways.
To pretreat:
A. Using the BISSELL Tough Stain   
Pre-cleaner, generously spray evenly 
over soiled area, do not overwet.
B.  Wait 3-5 minutes before deep cleaning.
C.  Clean as normal using your BISSELL deep 
cleaner.
2
4313
4
567
9101112EXIT
ST AR T
HERE
Operation
ug120-4078_25A3_908.indd   910/14/08   1:21:02 PM 
						

							10www.bissell.com 800.237.7691
Operation
Fill the 2-in-1 water tank
1. Remove the tank from the base of the 
machine by lifting the tank carry handle.
2.  Carry like a bucket to the sink. Rotate the 
handle forward to unlatch the lid. Remove lid, 
turn over and locate built in measuring cup.
3.  Fill formula to the indicated fill line on the 
built in measuring cup and pour into mouth 
of the bladder.
    If using BISSELL 3X Concentrate   
formulas: add one capful of formula   
directly into the mouth of the bladder.
4.  Fill the bladder with clean hot tap water.   
*Do not boil or microwave water as it 
can destroy the bladder.
5.  Replace the top of the tank by matching 
the lid and tank edges. Handle must be in 
the forward position in order to replace lid. 
Rotate the handle to the carrying position to 
latch the lid. 
Note: Remember to secure the lid and test 
to make sure it is secure before picking up 
the tank.
6.  Place tank into machine base, seating firmly 
in place. Rotate tank handle back into latched 
position. 
5.
1.2.
4.
3.
6.
ug120-4078_25A3_908.indd   1010/14/08   1:21:04 PM