Bissell 17n4-v Manual

							5.
   www.
BISSELL.com
   11
Operations
Clean-u\b
1. Remove the ta\fk from the base of the   
machi\fe b\b lifti\fg up o\f the ta\fk carr\b ha\fdle. 
Carr\b like a bucket to a utilit\b si\fk or outside 
where \bou will dispose of the dirt\b water.
2.  U\flatch the top of the ta\fk from the   
bottom b\b lifti\fg up o\f the ta\fk latches o\f 
either side of the ta\fk.
3.  Remove the top of the ta\fk b\b lifti\fg up   
o\f the ha\fdle. 
4.  Empt\b the Pet Hair Basket b\b slidi\fg it   
toward the fro\ft of the ta\fk a\fd lifti\fg up. 
Replace the Pet Hair Basket before stori\fg/  
co\fti\fui\fg to clea\f.
5.  Lift the bottom portio\f of the ta\fk; pour out 
dirt\b water i\f the si\fk through the recta\fgular 
shaped ope\fi\fg i\f the cor\fer of the ta\fk.
NOTE: You may notice hair & debris de\bosits 
on the car\bet or in the tank that were loosened 
by the cleaning action. This debris should be 
\bicked u\b and thrown away. Check the red lint 
filter near the duct on the back of the machine 
base for debris and remove before continuing.
6.  Fill the heav\b dut\b bladder with clea\f   
hot (140°F/60°C MAX) tap water, followi\fg 
i\fstructio\fs o\f page 6.
NOTE: Remember to secure the tank latches 
and test to make sure it is secure before   
\bicking u\b the tank. 
7.   Water ri\fse (recomme\fded). Ri\fsi\fg   
is a\f optio\fal step that ca\f be do\fe duri\fg the 
clea\fi\fg process or after the carpeted area has 
bee\f completed. Empt\b the heav\b-dut\b bladder 
if \fecessar\b, a\fd refill with hot tap water o\fl\b.  
Replace the ta\fk o\f the machi\fe. Take care to 
do a forward (wet) stroke b\b depressi\fg the   
trigger, a\fd a backward (wet) stroke, followed b\b 
a forward a\fd backward (dr\b) stroke, releasi\fg 
the trigger. Co\fti\fue this u\ftil the water \bou see 
comi\fg up the \fozzle is clear. (See page 13 for 
more machi\fe care tips.) 1.
3.
2.
4.
Filter  
						

							www.BISSELL.com
      12
Operations
Stain removal
Do Not Delay! Atte\fdi\fg to a\f accide\ft soo\f 
after it occurs e\fsures the most optimal clea\f. 
Leavi\fg it for a\f exte\fded period of time ma\b 
cause it to set a\fd become perma\fe\ft.
1. Blot up liquids with a\f absorbe\ft cloth or 
paper towels. White materials are recomme\fded 
because certai\f d\bes ma\b bleed a\fd make the 
stai\f worse.
2.  Ge\ftl\b scrape up a\f\b semi-solids with a spoo\f 
or spatula. Do \fot use a k\fife or other ute\fsil 
with sharp edges because it could damage the 
carpet or upholster\b.
3.  If the area has alread\b dried, separate a\fd 
remove from the carpet whatever semi-solids 
a\fd residue that ca\f be accessed before deep 
clea\fi\fg. 
4.  Be sure to test a\f\b spot removal formulas i\f 
a\f i\fco\fspicuous area first. This is importa\ft as 
some d\bes a\fd materials could be damaged or 
discolored b\b clea\fi\fg solve\fts. If such a cha\fge   
should occur, tr\b a differe\ft solutio\f or call a 
professio\fal.
5.  If clea\fi\fg o\f Berber carpeti\fg, ge\ftl\b ru\f 
\bour machi\fe over a hidde\f area. If \fo fuzzi\fg 
occurs, co\fti\fue clea\fi\fg i\f soiled area.
6.  Usi\fg the BISSELL Stai\f Pretreat, spra\b eve\fl\b 
over soiled area. Do \fot overwet. Wait 3-5   
mi\futes. Ge\ftl\b work the solutio\f b\b blotti\fg 
area with a clea\f, damp, color safe cloth.
7.   Clea\f large areas with the machi\fe or use   
the hose to clea\f spots, stai\fs a\fd hard-to-
reach areas.
Machine storage
O\fce \bour clea\fi\fg is complete, make sure the 
2-i\f-1 water ta\fk is emptied, ri\fsed out, a\fd 
dried before the \fext use. 
NOTE: Store cleaner in a \brotected, dry area. 
Since this \broduct uses water, it must not be 
stored where there is a danger of freezing. 
Freezing will damage internal com\bonents   
and void the warranty.
»   Let all parts 
dry completely 
before storing
Ti p  
						

							Machine care
For best results, a few simple steps ca\f assure 
\bour machi\fe is well mai\ftai\fed after \bour  
clea\fi\fg is complete.
1.  Flush \bour machi\fe of a\f\b remai\fi\fg   
residual solutio\f.
    a. Fill the 2-i\f-1 water ta\fk with clea\f hot 
tap water.
   b .   Recli\fe the ha\fdle a\fd press the spra\b 
trigger for 15 seco\fds while maki\fg forward 
a\fd backward passes o\f carpet. Release the 
trigger to suctio\f. Repeat for a\fother 15 sec-
o\fds. Co\fti\fue without pressi\fg the trigger 
u\ftil there is \fo more water bei\fg suctio\fed.
2.  Push the power butto\f to tur\f the machi\fe 
off. U\fplug the machi\fe a\fd wrap the power 
cord. Empt\b a\f\b dirt\b water or remai\fi\fg   
solutio\f a\fd clea\f water from the 2-i\f-1 ta\fk. 
3.  Ri\fse out 2-i\f-1 water ta\fk with hot tap water, 
taki\fg care to clea\f u\fder\feath the heav\b dut\b 
bladder a\fd all arou\fd it.  
4.  The top half of the ta\fk ca\f be ri\fsed clea\f 
through the \fozzle area. Clear the red filter of 
a\f\b debris that ma\b have accumulated. 
5.  Keepi\fg the 2-i\f-1 water ta\fk off the base of 
the machi\fe, simpl\b remove the floor \fozzle b\b 
tur\fi\fg the locki\fg ke\bs (see image for locatio\f) 
to the “u\flock” positio\f a\fd lift up. Ri\fse the 
floor \fozzle at the faucet. 
6.  A\f\b loose hair or debris ca\f be pulled from 
the brush rolls a\fd throw\f awa\b. For the most 
thorough clea\f before storage, follow directio\fs 
below for removal a\fd replaceme\ft of the brush 
rolls a\fd belts o\f pages 14 a\fd 15.
7.   Replace \fozzle b\b li\fi\fg up the locki\fg ke\bs 
with their slots a\fd placi\fg the \fozzle a\fd e\fd 
caps back o\fto the foot of the machi\fe. Secure 
i\fto place b\b tur\fi\fg the locki\fg ke\bs to the 
“lock” positio\f.
8.  To clea\f attachme\fts that ma\b have bee\f 
used, remove from hose a\fd ri\fse u\fder clea\f, 
ru\f\fi\fg water. Dr\b a\fd replace attachme\ft i\f the 
hose rack. Clea\f the hose b\b suctio\fi\fg clea\f 
water from the tap. Before replaci\fg, lift e\fd 
of hose a\fd stretch out to e\fsure all water is 
cleared from hose. Refer to page 8.
9.  To clea\f the suctio\f diverter, remove the two 
screws o\f the back of the diverter housi\fg. Take 
the diverter housi\fg to a si\fk a\fd ri\fse it with 
water. Take care to remove a\f\b debris that ma\b 
build up a\fd cause a clog. Replace the diverter 
housi\fg a\fd the two screws.
10.  After carpet is dr\b, vacuum agai\f to remove 
hair a\fd fuzz.
Maintenance & Care
4.
Filter
Diverter
5.6.
9.
    www.
BISSELL.com
   13
WARNING
To reduce the risk of electric shock, turn power switch 
off and disconnect plug from electrical outlet before 
performing maintenance or troubleshooting checks. 
						

							Maintenance & Care
Drive belt removal & re\blacement
Occasio\fal replaceme\ft of o\fe or both belts 
ma\b become \fecessar\b. If that is \feeded, please 
follow the i\fstructio\fs below.
1. Tur\f off the machi\fe, a\fd u\fplug it from   
the outlet.
2.  Remove the 2-i\f-1 water ta\fk. Set aside.
3.  Remove the \fozzle a\fd e\fd caps b\b   
followi\fg the i\fstructio\fs i\f Step 5 o\f   
page 13.
4.  Tur\f the machi\fe o\f its side.   
\bMPORTANT: cord side up.
5.  Remove 1 silver screw from the pivot arm.
6.  Remove pivot arm b\b ge\ftl\b lifti\fg up.
7.   Remove the drive belt a\fd replace it b\b   
first attachi\fg it to the small drive wheel, the\f 
attach it to the e\fd of the i\fside brush.
Fluid Connection Point Filter Maintenance
Periodic clea\fi\fg of the fluid co\f\fectio\f   
poi\ft i\f the spra\b \fozzle ma\b be required. 
1.  To clea\f the fluid co\f\fectio\f poi\ft,   
remove the \fozzle a\fd tur\f it over. 
2.  Clea\f the filter o\f the e\fd of the fluid   
co\f\fectio\f poi\ft with a small paperclip   
a\fd re-attach the \fozzle to the machi\fe.
3.
1. 2.4.
5. 7.
www.BISSELL.com
     14 
						

							2.5.
7.
Maintenance & Care
\frush removal and brush belt re\blacement 
Brushes ca\f be removed for clea\fi\fg or   
replaceme\ft as \feeded. 
1.  Follow drive belt removal I\fstructio\fs o\f   
page 14.
2.  Remove brush rolls b\b pulli\fg them off of 
the metal rods. Be careful \fot to lose the small 
washer at each e\fd of the brush rolls.
3.  Replace the brush belt if \fecessar\b.
4.  Place clea\fed or \few brush rolls back o\fto 
the rods. Make sure o\fe washer is o\f each e\fd 
of the rollers prior to slidi\fg o\fto the rod. Be 
sure to let the rod slide through the bushi\fg to 
i\fsure proper fit.
5.  Re-attach the brush belt o\f the bottom   
to the cogs of the small roller brushes.
6.  Replace the drive belt b\b followi\fg step 8   
o\f page 14.
7.   Place pivot arm i\f place a\fd screw i\f place 
usi\fg the silver screw.
8.  Replace \fozzle b\b li\fi\fg up the locki\fg ke\bs 
with their slots a\fd placi\fg the \fozzle back o\fto 
the foot of the machi\fe. Secure i\fto place b\b 
tur\fi\fg the locki\fg ke\bs to the “lock” positio\f.
If \bou have a\f\b questio\fs or are havi\fg trouble 
i\fstalli\fg or replaci\fg \bour belt(s) or brushes, 
please call BISSELL Co\fsumer Care.
    www.
BISSELL.com
   15  
						

							TroubleshootingWARNING
To reduce the risk of electric shock, turn power switch 
off and disconnect plug from electrical outlet before 
performing maintenance or troubleshooting checks.
ProblemPossible causes Remedies
Reduced 
s\bray or  
no s\bray Water ta\fk ma\b be empt\b
Fill heav\b dut\b bladder with hot  
tap water
Ta\fk ma\b \fot be seated   
completel\b Tur\f power OFF. Remove a\fd 
 
reseat ta\fk
Pump ma\b have lost prime. Tur\f power OFF a\fd the\f back ON. 
Wait o\fe mi\fute, the\f depress trigger
DirtLifter® 
Power\frush 
does not turn The belt is off or broke\f
Tur\f power OFF a\fd u\fplug u\fit 
from outlet. Follow i\fstructio\fs o\f 
page 15
Circuit breaker o\f machi\fe ma\b 
have tripped Tur\f the machi\fe OFF a\fd u\fplug 
from outlet. Check to see if foreig\f 
object is caught i\f brush roll. 
 
Remove object. Plug machi\fe i\f to 
reset circuit breaker
Cleaner   
not \bicking 
u\b solution Ta\fk ma\b \fot be seated properl\b
Pick up the 2-i\f-1 water ta\fk a\fd  
re-seat it so it sits s\fugl\b o\f the u\fit.
Ta\fk ma\b \fot be assembled   
properl\b Make sure the ta\fk latches o\f both 
sides of the ta\fk are latched properl\b.  
To make sure the\b are both latched 
properl\b, pick the ta\fk up b\b its ha\fdle.
2-i\f-1 water ta\fk is empt\b  Check fluid levels i\f heav\b-dut\b  
bladder. 
2-i\f-1 water ta\fk has picked up 
maximum dirt\b water a\fd red 
float door has closed. Empt\b 2-i\f-1 water ta\fk. Refill heav\b 
dut\b bladder with clea\f hot tap water 
a\fd replace. 
Red float "door" i\f the ta\fk ma\b 
have closed as a result of bumpi\fg 
object or movi\fg machi\fe back 
a\fd forth too quickl\b Tur\f the machi\fe OFF , allowi\fg red 
float door to release a\f i\fto the ope\f 
positio\f. Tur\f u\fit back ON to 
 
co\fti\fue clea\fi\fg. Be sure \bour   
forward a\fd backward strokes are 
do\fe at a slower pace.
Red li\ft scree\f \fear air duct   
is dirt\b Follow clea\fi\fg i\fstructio\fs i\f 
 
Step 4 o\f Page 13.
Other mai\fte\fa\fce or service \fot i\fcluded i\f the ma\fual should   
be performed b\b a\f authorized service represe\ftative.
Tha\fk \bou for selecti\fg a BISSELL product.
For any questions or concerns, \fISSELL is ha\b\by to 
be of service. Contact us directly at 1-800-237-7691.
Please do 
not return 
this \broduct 
t o   t h e   s t o r e .              
www. BISSELL.com
      16  
						

							Replacement Parts
These items are available for your BI\f\fELL dee\b cleaner.  
Call 1-800-237-7691 or visit www.BI\f\fELL.com
PART # PART NAME PART #PART NAME
160-0087 Tank Lid (Blackberry Purple)
160-0092 Tank Bottom
160-0097Tank Cap & Insert Assembly160-0098 Floor Nozzle with End Cap 
Assembly
203-6845Float Door160-0209 Measuring Cup
160-0104Brush Roll – 6 row (includes 1 
Brush, Axle, 2 Swivel Arms)160-2669 Small Brush Belt (right side)
203-6804Large Brush Belt (left side)160-0079 Upper Hose & Cord Wrap
*Not all parts are included with every model.
   www.
BISSELL.com
   1\f 
						

							Accessories
NOT ALL TOOLS ARE \bNCLUDED. 
These items are available for your BI\f\fELL dee\b cleaner.  
Call 1-800-237-7691 or visit www.BI\f\fELL.com
www. BISSELL.com
   
   
PART #PART NAME PART #PART NAME
203-6651 3” Tough Stain Tool
203-6652 Powered TurboBrush®   
Hand Tool
203-6653 4” Upholstery Tool203-6654 6” Stair Tool
203-6655Spraying Crevice Tool 1603650 3-N-1 Stair Tool
203-7412Deep Reach Pet Tool160-0057  Stain Trapper Tool
62E5-22X Deep Clean and Protect 
Formula with Scotchgard™ 
Protection 60 oz. 99K5-2 2X Pet Stain and Odor   
Formula with Scotchgard™ 
Protection 60 oz. 
89Q5-2 2X Allergen Cleansing   
Formula 60 oz. 1052  DeepClean + Refresh   
Formula 60 oz. 
78H6-3 2X Professional Deep Cleaning 
Formula with Scotchgard™ 
Protection 48 oz. 4001 Stain PreTreat 22 oz.
1\b
*Not all parts are included with every model. 
						

							This warranty gives you specific legal rights, and you may also  
have other rights which may vary from state to state. If you need   
additional instruction regarding this warranty or have questions   
regarding what it may cover, please contact BISSELL Consumer   
Care by E-mail, telephone, or regular mail as described below.
Limited Three-Year WarrantySubject to the *EXCEPTIONS AND EXCLUSIONS identified below, upon 
receipt of the product BISSELL will repair or replace (with new or 
remanufactured components or products), at BISSELL’s option, free   
of charge from the date of purchase by the original purchaser, for 
three years any defective or malfunctioning part.
See information below on "If your BISSELL product should   
require service".
This warranty applies to product used for personal, and not commercial 
or rental service. This warranty does not apply to fans or routine 
maintenance components such as filters, belts, or brushes. Damage or 
malfunction caused by negligence, abuse, neglect, unauthorized repair, 
or any other use not in accordance with the User's Guide is not covered. 
BISSELL IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES 
OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S 
LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. 
Some states do not allow the exclusion or limitation 
of incidental or consequential damages, so the 
above limitation or exclusion may not apply to you. 
*EXCEPTIONS AND EXCLUSIONS FROM 
THE TERMS OF THE LIM\LITED WARRANTY
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ANY OTHER 
WARRANTIES EITHER ORAL OR WRITTEN. ANY IMPLIED WARRANTIES 
WHICH MAY ARISE BY OPERATION OF LAW, INCLUDING THE IMPLIED 
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE, ARE LIMITED TO THE THREE YEAR DURATION FROM THE   
DATE OF PURCHASE AS DESCRIBED ABOVE.
Some states do not allow limitations on  how long an implied   
warranty last so the above limitation may not apply to you.
NOTE: Please kee\b your original sales  
recei\bt. It \brovides \broof of date of \burchase 
in the event of a warranty claim.
If your \fISSELL \broduct should 
require service:
Contact BISSELL Consumer Care to locate a BISSELL Authorized Service 
Center in your area. 
If you need information about repairs or replacement parts, or if you 
have questions about your warranty, contact BISSELL Consumer Care.
Website or E-mail:www.BISSELL.com
Call:BISSELL Co\fsumer Care
1-800-237-7691
Mo\fda\b – Frida\b 8am - 10pm ET
Saturda\b 9am - 8pm ET 
Su\fda\b 10am - 7pm ET
Warranty Service
   www.
BISSELL.com
   19  
						

							©2014 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in China
Part Number 160-5266  Rev 09/14
Visit our website at: www.BISSELL.com
Scotchgard is a trademark of 3M 
For i\fformatio\f about repairs or replaceme\ft parts, or questio\fs about \bour warra\ft\b:Registeri\fg is quick, eas\b a\fd offers \bou be\fefits over the lifetime of \bour product.  
You’ll recei\fe:
Visit www.\fISSELL.com/registration now!
Visit the \fISSELL website: www.\fISSELL.com
Whe\f co\ftacti\fg BISSELL, have model \fumber of clea\fer available.
Please record \bour Model Number: __________________\a_
Please record \bour Purchase Date:  __________________\a_
NOTE: Please keep your original sales \Dreceipt. \bt pro\fides proof of purchase 
date in the e\fent of a warranty claim. See Warranty on page 15 for details.  
Call:
BI\f\fELL Consumer Care1-800-237-7691
Mo\fda\b - Frida\b 8 am - 10 pm ET 
Saturda\b  9 am - 8 pm ET 
Su\fda\b  10am - 7pm ET
Email:
BI\f\fELL.com/email-us
BISSELL Consumer Care Register your product today!
\fISSELL Rewards PointsAutomaticall\b ear\f poi\fts for   
discou\fts a\fd free shippi\fg o\f 
future purchases.
Faster ServiceSuppl\bi\fg \bour i\fformatio\f \fow 
saves \bou time should \bou \feed to 
co\ftact us with questio\fs regardi\fg 
\bour product.
Product Su\b\bort Reminders 
and Alerts
We’ll co\ftact \bou with a\f\b   
importa\ft product mai\fte\fa\fce 
remi\fders a\fd alerts.
S\becial PromotionsOptio\fal: Register \bour email  
to receive \fotice of offers,  
co\ftests, clea\fi\fg tips a\fd more!
We can’t wait to hear from you!
Rate this product a\fd let us (a\fd millio\fs  
of \bour closest frie\fds) k\fow what \bou thi\fk! 
www.\fISSELL.com
20