Bissell 17n4-v Manual

							DEEPCLEAN PROHEAT 2X
®   
PROFESSIONAL PET
 
USER GUIDE
1\fN4 SERIES
COSTCO ITEM# \b99110   
						

							www.BISSELL.com
      2
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, 
ELECTRIC SHOCK, OR INJURY:
»   Connect to a properly grounded 
outlet only. See grounding  instructions. Do not modify the 
3-prong grounded plug.
»    Do not leave appliance when it is 
plugged in. Unplug from outlet when 
not in use and before servicing.
»    Use indoors only.
»    Do not allow to be used as a toy. 
Close attention is necessary when 
used by or near children.
»    Do not use for any purpose other 
than described in this User’s 
Guide. Use only manufacturer’s 
recommended attachments.
»    Do not use with damaged cord 
 or plug. If appliance is not  working as it should, or has been 
dropped, damaged, left outdoors, 
or dropped into water, have it 
repaired at an authorized 
 service center.
»    Always install float before any wet 
 pick-up operation. »   
Do not pull or carry by cord, use 
cord as a handle, close a door on 
cord, or pull cord around sharp 
edges or corners. Do not run 
appliance over cord. Keep cord 
away from heated surfaces.
»    Do not unplug by pulling on 
 cord. To unplug, grasp the plug, 
not the cord. 
»    Do not handle plug or appliance 
with wet hands.
»    Do not put any object into open
-ings. Do not use with any opening 
blocked; keep openings free of 
dust, lint, hair, and anything that 
may reduce air flow.
»    Keep hair, loose clothing, fingers, 
and all parts of body away from 
openings and moving parts.
»    Turn off all controls before plug
-ging or unplugging appliance.
»    Use extra care when cleaning 
 on stairs.
»    Do not use to pick up flammable 
or combustible materials (lighter 
fluid, gasoline, kerosene, etc.) 
 or use in areas where they may  be present. »   
Do not use appliance in an 
enclosed space filled with vapors 
given off by oil base paint, paint 
thinner, some moth proofing 
 substances, flammable dust,  or other explosive or toxic vapors.
»    Do not use to pick up toxic 
 material (chlorine bleach,  ammonia, drain cleaner, etc.).
»    Do not pick up anything that 
 is burning or smoking, such as 
cigarettes, matches, or hot ashes.
»    Use only BISSELL cleaning 
 products intended for use  with this appliance to prevent  internal component damage.  See the Cleaning Fluid section  of this guide. 
»    Unplug before connecting 
TurboBrush Tool.
»    Do not immerse. Use only on 
 surfaces moistened by the  cleaning process.
»    Keep appliance on a level surface.
»    Do not carry the appliance while 
 in use.
READ ALL INSTRUCTIONS \fEFORE USING YOUR DEEP CLEANER.   
When using an electrical appliance, basic precautions should be observed, including the following: 
This model is for household use only.  Commercial use of this unit voids the manufacturer’s warranty.
SAVE THESE INSTRUCTIONS   
FOR FUTURE USE
WARNING
Improper connection of the equipment-grounding conductor can 
result in a risk of electrical shock.  Check with a qualified electrician 
or service person if you aren’t sure if the outlet is properly grounded. 
DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper 
outlet installed by a qualified electrician. This appliance is designed 
for use on a nominal 120-volt circuit, and has a grounding attachment 
plug that looks like the plug in the illustration. Make certain that the 
appliance is connected to an outlet having the same configuration as 
the plug. No plug adapter should be used with this appliance.GROUNDING INSTRUCTIONSThis appliance must be connected to a grounded wiring system. If it 
should malfunction or break down, grounding provides a safe path 
of least resistance for electrical current, reducing the risk of electrical 
shock. The cord for this   
appliance has an equipment-grounding   
conductor and a grounding plug. It must   
only be plugged into an outlet that is   
properly installed and grounded in   
accordance with all local codes and ordinances.
Grounded 
Outlets
Grounding Pin  
						

							   www.
BISSELL.com
   3
Thanks for buying a BISSELL deep cleaner
We’re glad you purchased a BISSELL 
deep cleaner. Everything we know 
about floor care went into the design 
and construction of this complete, 
high-tech home cleaning system.
Your BISSELL deep cleaner is well 
made, and we back it with a limited 
three-year warranty. We also stand 
behind it with a knowledgeable,   
dedicated Consumer Care   
department, so, should you ever   
have a problem, you’ll receive fast, 
considerate assistance.
My great-grandfather invented 
the floor sweeper in 1\b\f6. Today, 
BISSELL is a global leader in the 
design, manufacture, and service  
of high quality homecare products  
like your BISSELL deep cleaner.
Thanks again, from all of us  
at BISSELL.
Mark J. Bissell  
Chairman & CEOSafety Instructions ...........2
Product View ................ 4
Assembly ..................\1. 5
Operations ............... 5-12
Maintenance & Care ...... 13-15
Troubleshooting ............16
Replacement Parts ......... 1\f
Accessories ................ 1\b
Warranty ..................\1. 19
Consumer Care .............19
Product Registration .......20 
						

							1 Spray Trigger
2  Extra Long Power Cord
3  Upper Handle
4  Flex Hose
5  Power Switch
6  Easy Carry Handle
7  Tank Carry Handle
8  Large Capacity 2-in-1 Water Tank 9 
Easy To Remove Nozzle
10  EdgeSweep® Brushes
11  Lower Base
12  Upper Hose Rack
13  Lower Hose Rack
14  Handle Recline Pedal
Product View
1
2
43
5
6
7
8
9
10
11
12
13
14
www. BISSELL.com
   
   4 
						

							   www.
BISSELL.com
   5
Your deep clea\fer comes i\f four   
eas\b-to-assemble compo\fe\fts: 
  U\b\ber Handle with Screws   
    (screws ta\bed to handle)  
  Lower \fase  
  U\b\ber Hose Rack  
  U\b\ber Tool Holder
The o\fl\b thi\fg \bou will \feed to assemble   
\bour clea\fer is a Phillips head screwdriver.
1.  Slide upper ha\fdle o\fto lower base. 
2.  Screw 2 screws i\fto the marked holes.
3.  Attach the upper tool holder to the upper 
ha\fdle b\b s\fappi\fg the bottom half i\f first,   
the\f s\fappi\fg i\f the top half.
4.  Place upper hose rack o\fto back of   
upper ha\fdle, a\fd secure with screw.
5.  S\fap tools o\fto the Upper Tool Holder.
6.  Wrap power cord a\fd flex hose. S\fap hose 
wa\fd i\fto hose clip o\f upper hose wrap.
NOTE: Take care to wra\b the hose in the   
right direction in order to make use of the   
hose cli\b.  Make sure the hose is wra\b\bed 
beginning from the back of the machine   
and wra\b\bing toward the front.
Your deep clea\fer assembl\b is \fow complete!
Assembly
OperationsWARNING
Do not plug in your deep cleaner until   
you are familiar with all instructions and 
operating procedures.
6.
Cleaning fluid 
Keep ple\ft\b of ge\fui\fe BISSELL 2X formula o\f 
ha\fd so \bou ca\f clea\f a\fd protect whe\fever it 
fits \bour schedule. Alwa\bs use ge\fui\fe BISSELL 
deep clea\fi\fg formulas. No\f-BISSELL   
clea\fi\fg solutio\fs ma\b harm the machi\fe a\fd 
will void the warra\ft\b.
Professional   
Deep Cleaning Pet Stain & Odor Deep Clean 
 
& Protect Allergen Cleansing
DeepClean + Refresh Stain Pretreat
Best for Out Cleans 
 
all other   
formulas Removes tough pet 
stains and contains  patented odor 
removal technology Deep cleans carpets 
and protects from future stains with 
Scotchgard™ Protector Helps remove pet & 
pollen allergens  Powerful 
 
cleaning with a   
refreshing scent  Pretreat to 
 
penetrate   
and loosen   
tough stains
2X Concentrated XXXXX
Scotchgard™ Protection®XXX
*ONLY BISSELL Protects from future stai\fs with Scotchgard™ Protector 5. 4a. 3.
4b.
1.
2.
WARNING
To reduce the risk of fire and electric shock 
due to internal component damage, use 
only BISSELL cleaning fluids intended for use 
with the deep cleaner.   
						

							\fefore you clean
1. Move fur\fiture to a\fother area if clea\fi\fg   
a\f e\ftire room (optio\fal).
2.  Pick up all loose dirt, debris, a\fd pet hair 
before deep clea\fi\fg. It is recomme\fded that 
\bou vacuum the area prior to deep clea\fi\fg.
3.  Pla\f \bour clea\fi\fg route to leave a\f exit   
path. It is best to begi\f clea\fi\fg i\f the cor\fer 
farthest from \bour exit.  
4.  Pretreati\fg (optio\fal) is recomme\fded to 
improve clea\fi\fg effective\fess for heavil\b soiled 
carpet i\f high traffic areas such as e\ftr\bwa\bs 
a\fd hallwa\bs. 
\fISSELL Stain Pretreat    a. Spra\b the BISSELL Stai\f Pretreat  
formula o\fto heav\b traffic areas, soiled  
areas, or stai\fs.
   b .   Allow to pe\fetrate for at least 3 mi\futes.
    c. Clea\f as \formal followi\fg the i\fstructio\fs   
o\f the \fext page.
Machine Pre\b
Fill the 2-in-1 Water Tank 1.  Remove the ta\fk from the base of the machi\fe 
b\b lifti\fg up the ta\fk carr\b ha\fdle. Carr\b like a 
bucket to the si\fk.
2.  U\flatch the top of the ta\fk from the bottom 
b\b lifti\fg up o\f the ta\fk latches o\f either   
side of the ta\fk.
3.  Usi\fg the measuri\fg cup provided, pour   
5 oz of BISSELL 2X formula i\fto the heav\b   
dut\b bladder. Fill the rest of the heav\b dut\b   
bladder with hot (140°F/60°C MAX) tap water. 
DO NOT BOIL OR MICROWAVE WATER.       
NOTE: Always use genuine \fISSELL 2X   
formulas to maximize cleaning and for the 
safety of your machine.
4.  Place the top of the ta\fk back o\f the   
bottom a\fd secure the latches o\f both sides.
NOTE: Remember to secure the tank latches   
on either side of the tank and test to make sure 
they are secure before \bicking u\b the tank.
Operations
www. BISSELL.com
      
WARNING
To reduce the risk of fire and electric shock 
due to internal component damage, use 
only BISSELL cleaning fluids intended for use 
with the deep cleaner.
ATTENTIONSome Berber carpets have a tendency to fuzz 
with wear. Repeated strokes in the same area 
with an ordinary vacuum or deep cleaner 
may aggravate this condition. Please see Stain 
Removal instructions on page 12.
6
123
456
789
1. 2.
3. 4.  
						

							   www.
BISSELL.com
   \f
Operations
Car\bet cleaning 
1. Plug i\fto a proper outlet a\fd push the o\f/off 
butto\f located o\f the fro\ft of   
the ha\fdle.
2.  Recli\fe the ha\fdle b\b pressi\fg o\f the lever   
at the back of the machi\fe behi\fd the 2-i\f-1 
water ta\fk.
3.  Clea\fi\fg Strokes. While pressi\fg the trigger, 
make o\fe slow forward wet pass a\fd a\fother 
o\fe back.  Caution: Do not o\ferwet. Take care 
\fot to ru\f over loose objects or edges of area 
rugs. Stalli\fg brush ma\b result i\f premature   
belt failure.  
NOTE: Your machine is equi\b\bed with a circuit 
breaker that will automatically shut off the 
brush if a large or loose object is caught in the 
brush roll. If that ha\b\bens, be sure to un\blug 
your machine, remove the foreign object, and 
then \blug the machine back in to reset the   
circuit breaker. 
4.  Release the trigger a\fd make o\fe slow   
forward a\fd backward pass over the same area 
to remove a\f\b residual dirt\b water a\fd aid i\f 
dr\bi\fg. Repeat clea\fi\fg passes u\ftil solutio\f 
bei\fg pulled up appears clea\f. Co\fti\fue   
passes without pressi\fg the trigger u\ftil \bou 
ca\f’t see a\f\b more water bei\fg pulled up. 
1. 2. 
						

							Cleaning with attachments
Your deep clea\fer comes equipped with  
a hose a\fd at least o\fe attachme\ft for   
clea\fi\fg stairs, upholster\b, a\fd more.
1. \bmportant! If usi\fg to clea\f upholster\b,   
check upholster\b tags before clea\fi\fg. 
1.  Check ma\fufacturer’s tag before clea\fi\fg. 
“W” or “WS” o\f the tag mea\fs \bou ca\f use \bour 
deep clea\fer. If the tag is coded with a\f “X” or 
a\f “S” (with a diago\fal stripe through it), or sa\bs 
“Dr\b Clea\f O\fl\b”, do \fot proceed with a\f\b deep 
clea\fi\fg machi\fe. Do \fot use o\f velvet or silk. 
If ma\fufacturer’s tag is missi\fg or \fot coded, 
check with \bour fur\fiture dealer.
    a. Check for colorfast\fess i\f a\f   
i\fco\fspicuous place.
   b .   If possible, check upholster\b stuffi\fg. 
Colored stuffi\fg ma\b bleed through   
fabric whe\f wet.
    c. Pla\f activities to allow upholster\b   
time to dr\b.
    d. Pick up a\f\b loose dirt, debris a\fd   
pet hair before deep clea\fi\fg.
2.  Follow the i\fstructio\fs o\f page 6 for   
filli\fg the 2-i\f-1 water ta\fk.
3.  The machi\fe is desig\fed with a\f automatic 
diverter. Simpl\b lock the u\fit upright i\f order to 
clea\f with the hose.
4.  Attach the clea\fi\fg tool to the e\fd of the hose.  
5.  Plug i\f a\fd tur\f o\f the power switch.
NOTE: Instructions for Stain Tra\b\ber Tool and 
3-N-1 Tool are on \bages 9 & 10.
6.  Clea\f b\b pressi\fg the trigger to spra\b   
solutio\f o\fto the area to be clea\fed. Slowl\b 
move the tool back a\fd forth over the soiled   
surface. Release the trigger to suctio\f soiled 
water. Co\fti\fue to clea\f i\f the area, worki\fg 
i\f small sectio\fs, u\ftil \fo more dirt ca\f be 
removed. Ri\fse (optio\fal) a\fd suctio\f as   
\feeded.  Caution: Do not o\ferwet.
7.   Remove a\fd ri\fse tools i\f clea\f, ru\f\fi\fg   
water. Dr\b a\fd replace o\f the e\fd of the hose.
8.  It is recomme\fded that \bou suctio\f clea\f 
water from a bowl to ri\fse out the hose. 
9.  Before replaci\fg lift e\fd of hose a\fd stretch 
out to e\fsure all water is cleared from hose.
10.  Wrap flex hose arou\fd the hose rack.
11.  Empt\b 2-i\f-1 water ta\fk a\fd ri\fse out,   
followi\fg the i\fstructio\fs o\f page 11.
Operations
4.
9.
WARNING
To reduce the risk of injury, be extra careful when cleaning 
stairs. Make sure machine is secure and level.
Adsdfdd ghg bvh
cvbbj jkn hnbj jkv\
h
gcghhjj  jhf fhl kllgh
Ma\fufacturer’s tag
www.BISSELL.com
      \b 
						

							   www.
BISSELL.com
   9
Cleaning with tools
Stain Tra\b\ber Tool
The Stai\f Trapper Tool is great for keepi\fg   
messes out of the machi\fe’s hose s\bstem. 
1.  Attach the Stai\f Trapper tool to the e\fd   
of the hose.
2.  Ge\ftl\b scrape up a\f\b semi-solids with a spoo\f 
or spatula. Do \fot use a k\fife or other ute\fsil 
with sharp edges because it could damage the 
carpet or upholster\b.
3.  Press the trigger o\f the hose to spra\b solutio\f 
o\fto the mess. Use the brushes to ge\ftl\b   
scrub the mess a\fd the\f suctio\f the mess   
awa\b. Be careful \fot to move the tool back   
a\fd forth too quickl\b or soiled water will flow 
back i\fto the hose. 
NOTE: Do not fill the Stain Tra\b\ber tank   
above the FULL line.
4.  To empt\b the tool co\ftai\fer, rotate to the 
u\flock s\bmbol.  
NOTE: \fe careful to kee\b the to\b of the tool 
facing u\bward or soiled water will s\bill out of 
the tank.
5.  Empt\b the dirt\b water i\fto a si\fk a\fd ri\fse 
with clea\f water. Replace the co\ftai\fer b\b li\fi\fg 
up a\fd rotati\fg to the lock s\bmbol. 
6.  The fro\ft faceplate of the tool ca\f also be 
removed a\fd ri\fsed for eas\b clea\fi\fg. Simpl\b 
pull dow\f o\f the face plate to remove it.  
Operations
6.
4. 1.  
						

							Operations
3-N-1 Stair Tool
1. Attach the tool to the e\fd of the hose.
2.  Twist the tool head to the desired setti\fg:
   a. The flat edge ca\f be used to   
clea\f flat areas
   b. The pointed edge ca\f be used to   
clea\f crevices
   c. The indented edge ca\f be used to   
clea\f curved areas
3.  E\fsure the tool spra\b tip is poi\fti\fg   
dow\fward. Press the trigger a\fd slowl\b move 
the tool back a\fd forth over the soiled area.
4.  Release the trigger to suctio\f up water   
a\fd dirt. 
5.  To clea\f the tool, simpl\b remove the tool from 
the e\fd of the hose a\fd ri\fse with water. The 
fro\ft faceplate of the tool ca\f also be removed 
a\fd ri\fsed for eas\b clea\fi\fg. 
www. BISSELL.com
   
   10
1.
2a.
2c. 2b.
5.