Bissell 17n4-v Manual

DEEPCLEAN PROHEAT 2X
®   
PROFESSIONAL PET
 
USER GUIDE
1\fN4 SERIES
COSTCO ITEM# \b99110   

www.BISSELL.com
      2
IMPORTANT SAFETY INSTRUCTIONS
WARNING
TO REDUCE THE RISK OF FIRE, 
ELECTRIC SHOCK, OR INJURY:
»   Connect to a properly grounded 
outlet only. See grounding  instructions. Do not modify the 
3-prong grounded plug.
»    Do not leave appliance when it is 
plugged in. Unplug from outlet when 
not in use and before servicing.
»    Use indoors only.
»    Do not allow to be used as a toy. 
Close attention is necessary when 
used by or near children.
»    Do not use for any purpose other...

   www.
BISSELL.com
   3
Thanks for buying a BISSELL deep cleaner
We’re glad you purchased a BISSELL 
deep cleaner. Everything we know 
about floor care went into the design 
and construction of this complete, 
high-tech home cleaning system.
Your BISSELL deep cleaner is well 
made, and we back it with a limited 
three-year warranty. We also stand 
behind it with a knowledgeable,   
dedicated Consumer Care   
department, so, should you ever   
have a problem, you’ll receive fast, 
considerate...

1 Spray Trigger
2  Extra Long Power Cord
3  Upper Handle
4  Flex Hose
5  Power Switch
6  Easy Carry Handle
7  Tank Carry Handle
8  Large Capacity 2-in-1 Water Tank 9 
Easy To Remove Nozzle
10  EdgeSweep® Brushes
11  Lower Base
12  Upper Hose Rack
13  Lower Hose Rack
14  Handle Recline Pedal
Product View
1
2
43
5
6
7
8
9
10
11
12
13
14
www. BISSELL.com
   
   4 

   www.
BISSELL.com
   5
Your deep clea\fer comes i\f four   
eas\b-to-assemble compo\fe\fts: 
  U\b\ber Handle with Screws   
    (screws ta\bed to handle)  
  Lower \fase  
  U\b\ber Hose Rack  
  U\b\ber Tool Holder
The o\fl\b thi\fg \bou will \feed to assemble   
\bour clea\fer is a Phillips head screwdriver.
1.  Slide upper ha\fdle o\fto lower base. 
2.  Screw 2 screws i\fto the marked holes.
3.  Attach the upper tool holder to the upper 
ha\fdle b\b s\fappi\fg the bottom half i\f first,   
the\f...

\fefore you clean
1. Move fur\fiture to a\fother area if clea\fi\fg   
a\f e\ftire room (optio\fal).
2.  Pick up all loose dirt, debris, a\fd pet hair 
before deep clea\fi\fg. It is recomme\fded that 
\bou vacuum the area prior to deep clea\fi\fg.
3.  Pla\f \bour clea\fi\fg route to leave a\f exit   
path. It is best to begi\f clea\fi\fg i\f the cor\fer 
farthest from \bour exit.  
4.  Pretreati\fg (optio\fal) is recomme\fded to 
improve clea\fi\fg effective\fess for heavil\b soiled 
carpet i\f high...

   www.
BISSELL.com
   \f
Operations
Car\bet cleaning 
1. Plug i\fto a proper outlet a\fd push the o\f/off 
butto\f located o\f the fro\ft of   
the ha\fdle.
2.  Recli\fe the ha\fdle b\b pressi\fg o\f the lever   
at the back of the machi\fe behi\fd the 2-i\f-1 
water ta\fk.
3.  Clea\fi\fg Strokes. While pressi\fg the trigger, 
make o\fe slow forward wet pass a\fd a\fother 
o\fe back.  Caution: Do not o\ferwet. Take care 
\fot to ru\f over loose objects or edges of area 
rugs. Stalli\fg brush ma\b result...

Cleaning with attachments
Your deep clea\fer comes equipped with  
a hose a\fd at least o\fe attachme\ft for   
clea\fi\fg stairs, upholster\b, a\fd more.
1. \bmportant! If usi\fg to clea\f upholster\b,   
check upholster\b tags before clea\fi\fg. 
1.  Check ma\fufacturer’s tag before clea\fi\fg. 
“W” or “WS” o\f the tag mea\fs \bou ca\f use \bour 
deep clea\fer. If the tag is coded with a\f “X” or 
a\f “S” (with a diago\fal stripe through it), or sa\bs 
“Dr\b Clea\f O\fl\b”, do \fot proceed with a\f\b...

   www.
BISSELL.com
   9
Cleaning with tools
Stain Tra\b\ber Tool
The Stai\f Trapper Tool is great for keepi\fg   
messes out of the machi\fe’s hose s\bstem. 
1.  Attach the Stai\f Trapper tool to the e\fd   
of the hose.
2.  Ge\ftl\b scrape up a\f\b semi-solids with a spoo\f 
or spatula. Do \fot use a k\fife or other ute\fsil 
with sharp edges because it could damage the 
carpet or upholster\b.
3.  Press the trigger o\f the hose to spra\b solutio\f 
o\fto the mess. Use the brushes to ge\ftl\b   
scrub...

Operations
3-N-1 Stair Tool
1. Attach the tool to the e\fd of the hose.
2.  Twist the tool head to the desired setti\fg:
   a. The flat edge ca\f be used to   
clea\f flat areas
   b. The pointed edge ca\f be used to   
clea\f crevices
   c. The indented edge ca\f be used to   
clea\f curved areas
3.  E\fsure the tool spra\b tip is poi\fti\fg   
dow\fward. Press the trigger a\fd slowl\b move 
the tool back a\fd forth over the soiled area.
4.  Release the trigger to suctio\f up water   
a\fd dirt. 
5.  To...