Home > Bissell > Vacuum Cleaner > Bissell 1699 N Manual

Bissell 1699 N Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Bissell 1699 N Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 201 Bissell manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							Safety Instructions
    Product view / Accessories
    Assembly
    Features / Operations 
    ProHeat
    ™ 
    ClearView
    ®
    USER’S GUIDE
    1699 SERIES - 120V
    8905 SERIES - 120V
    3
    4
    5
    6-17
    Routine Maintenance18-20
    Troubleshooting21-22
    Warranty 24
    Replacement Parts23
    Consumer Services 22 
    						
    							Thanks for buying a BISSELL ProHeat™ClearView®
    We’re glad you purchased a BISSELL ProHeat ClearView heated 
    formula deep cleaner. Everything we know about floor care went into the
    design and construction of this complete, high-tech home cleaning system.
    Your ProHeat ClearView is well made, and we back it with a limited 
    one-year warranty. We also stand behind it with a knowledgeable,
    dedicated Consumer Services department, so, should you ever have a
    problem, you’ll receive fast, considerate assistance.
    My great-grandfather invented the floor sweeper in 1876. Today,
    BISSELL is a global leader in the design, manufacture, and service of high
    quality homecare products like your ProHeat Clearview.
    Thanks again, from all of us at BISSELL.
    Mark J. Bissell
    President and Chief Executive Officer
    2 
    						
    							3
    IMPORTANT SAFETY INSTRUCTIONS
    Do not unplug by pulling on the cord.
    Use only manufacturer’s recommended 
    attachments
    Use only cleaning products formulated by 
    BISSELL for use in this appliance
    Keep openings free of dust, lint, hair, etc.
    Do not point attachment nozzle at people 
    or animals.
    Keep appliance on a level surface
    Turn off all controls before unplugging
    Unplug before attaching the Turbo Brush™
    
    Be extra careful when cleaning stairs
    Close attention is necessary when used by 
    or near children
    SAVE THESE INSTRUCTIONS.
    THIS MODEL IS FOR HOUSEHOLD USE ONLY.
    Commercial use of this unit voids the 
    manufacturer’s warranty.
    GROUNDING INSTRUCTIONS
    This appliance must be connected to a grounded
    wiring system. If it should malfunction or break
    down, grounding provides a safe path of least
    resistance for electrical current, reducing the risk
    of electrical shock. The cord for this appliance
    has an equipment-grounding conductor and a
    grounding plug. It must only be plugged into an
    outlet that is properly installed and grounded in
    accordance with all local codes and ordinances.
    WARNING:Improper connection
    of the equipment-grounding conductor can
    result in a risk of electrical shock.Check
    with a qualified electrician or service person
    if you aren’t sure if the outlet is properly
    grounded. DO NOT MODIFY THE PLUG. If 
    it will not fit the outlet, have a proper 
    outlet installed by a qualified electrician.
    This appliance is designed for use on a
    nominal 120-volt circuit, and has a
    grounding attachment plug that looks like
    the plug in the drawing above. Make cer-
    tain that the appliance is connected to an 
    outlet having the same configuration as
    the plug. No plug adapter should be used
    When using an electricalappliance, basic
    precautions should be observed, including
    the following:
    Read all
    instructions beforeusing your 
    PROHEAT™CLEARVIEW.™
    WARNING:To reduce the risk of
    fire, electric shock, or injury:
    Do not immerse.
    Use only on surfaces moistened by 
    cleaning process.
    Always connect to a properly grounded outlet.
    See Grounding Instructions.
    Unplug from outlet when not in use and before
    conducting maintenance or troubleshooting.
    Do not leave machine when it is plugged in
    Do not service machine when it is plugged in
    Do not use with damaged cord or plug
    If appliance is not working as it should, has
    been dropped, damaged, left outdoors, or
    dropped into water, have it repaired at an
    Authorized Service Center.
    Do not expose to rain, store indoors 
    Do not pull or carry by cord, use cord as a 
    handle, close door on cord, pull cord around
    sharp corners or edges, run appliance over cord,
    or expose cord to heated surfaces
    Do not carry the appliance while in use
    Unplug by grasping the plug, not the cord
    Do not handle plug or appliance with wet hands
    Do not put any object into appliance openings,
    use with blocked opening, or restrict air flow
    Do not expose hair, loose clothing, fingers 
    or body parts to openings or moving parts
    Do not pick up hot or burning objects
    Do not pick up flammable or combustible 
    materials (lighter fluid, gasoline, kerosene, etc.) or 
    use in the presence of explosive liquids or vapor
    Do not use appliance in an enclosed space filled
    with vapors given off by oil base paint, paint 
    thinner, some moth proofing sub stances, flam-
    mable dust, or other explosive or toxic vapors
    Do not pick up toxic material (chlorine bleach,
    ammonia, drain cleaner, gasoline, etc.)
    Do not modify the 3-prong grounded plug
    Do not allow to be used as a toy
    Do not use for any purpose other than 
    described in this User’s Guide
    Do not operate the appliance unless the 
    belt door is securely assembled in the 
    location provided
    Grounded
    Outlets
    Grounding Pin 
    						
    							4
    SmartMix®
    Tank
    DirtLifter
    ®
    PowerBrush
    Floor Nozzle Window SmartTemp
    ™
    Ready Light
    ReadyTools
    ™
    DialLower
    Handle
    Belt Access DoorFlow Indicator
    (Filter Inside)
    SmartMix
    ®
    Switch
    Flex HosePower Cord
    Quick Release Tool Caddy
    SmartTemp
    ™
    Switch
    Tank-in-
    Tank
    ™
    Power 
    SwitchTrigger
    Upper
    Handle
    4” Upholstery
    Tool Storage
    Handle
    Release
    Tough Stain 
    Brush Storage
    Hex Nuts
    Crevice Tool
    Storage
    1.
    2.
    3.
    4.
    5.
    *All items may not be included with your model. 
    More tools are available. To order replacement parts or
    tools please refer to page 23.
    Bare Floor Attachment(Available on select models only.)Spraying Crevice Tool
    (Available on select models only.)
    16 oz. BISSELL
    Fiber Cleansing
    Formula
    ™ with
    Scotchgard™
    Protection
    16 oz.
    Tough Stain
    PreCleaner
    ™
    16 oz.
    Floor 
    Cleansing
    Formula
    ™
    Tough Stain Brush
    TurboBrush™
    (Available on select
    models only.)
    PreTreat Wand(Available on select
    models only.)
    B
    R
    U
    S
    H
    S
    U
    C
    T
    IO
    N
    TRIAL SIZE
    Floor Cleansing Formula
    FOR DEEP 
    CLEANING MACHINES™
    32 FL.OZ. (946 mL)CAUTION: MAY BE IRRITATING TO THE EYES.
                                                     READ BACK PANEL CAREFULLYSafely Deep Cleans and
    Revitalizes No-Wax FloorsDIRTANDSTAINSREMOVESDEEPDOWN
    ®
    TOUGHSTAINPRECLEANER™PenetratesandLoosensToughStains&EmbeddedDirtbeforeDeepCleaning
    Accessories
    Keep plenty of genuine BISSELL Advanced
    Cleaning Formulas on hand so you can clean
    whenever it fits your schedule. Always use
    genuine BISSELL deep cleaning formulas.
    Non-BISSELL cleaning solutions may harm
    the machine and void the warranty.
    16 oz. BISSELL
    Multi-Allergen
    Formula
    ™with
    Scotchgard™
    Protection
    4” Upholstery Tool(Available on select 
    models only.)
    TurboBrush®
    Storage 
    (Select Models) 
    						
    							5
    How To Put It Together
    How to Use this Guide
    This User’s Guide has been designed to help you get
    the utmost satisfaction from your BISSELL ProHeat
    ClearView. You’ll find assembly and operating 
    instructions, safety precautions, as well as maintenance
    and troubleshooting instructions. Please read this Guide
    thoroughly before assembling your Deep Cleaner.
    Pay particular attention to the product diagram, assem-
    bly instructions, and part names. Locate and organize all
    parts before assembly. Familiarize yourself with the parts
    and where they go. Following this User’s Guide will
    greatly enhance your ability to get the most performance
    from your BISSELL ProHeat ClearView for many years.
    Your ProHeat ClearView comes in three,
    easy to assemble components.
    Upper Handle
    Lower Handle
    Tool Caddy
    The only thing you will need to assemble your cleaner is
    a Phillips head        screwdriver.
    Refer to Assembly Diagram on page 4
    Slide Upper Handle onto Lower Handle.
    Feed bundled power cord through Tool Caddy
    from caddy’s flat side.
    Align Upper Handle holes and Tool Caddy holes.
    Place hex nut into back of Tool Caddy and hold in
    place. Insert bolt from front to back turning into
    the hex nut until snug. Do not over tighten.
    Repeat for the second bolt and hex nut.
    Insert 2 screws into lower 2 holes.Turn until snug.
    Snap tools into Storage on the Tool Caddy as
    shown in figure 6.
    Wrap Power Cord and Flex Hose as shown in
    figure 7.
    ProHeat ClearView assembly is 
    now complete.
    WARNING: Do Not plug in your cleaner
    until you have completely
    assembled it per the following
    instructions and are familiar
    with all instructions and
    operating procedures.
    1.
    2.
    3.
    4.
    O
    NO
    FF
    ONO
    F
    F6
    75.
    6.
    7. 
    						
    							6
    Special Features of Your BISSELL ProHeat™ClearView®
    The BISSELL SmartClean®System
    The ProHeat ClearView is a home cleaning system that
    automatically mixes hot tap water with the BISSELL
    advanced cleaning formula and heats the solution as 
    it is applied to the carpet. The combination of heated
    cleaning solution, powered brush and suction provide a
    safe & effective method of cleaning.
    Temperature control automatically heats the cleaning
    solution as it is being applied to the carpet (*) to safely
    optimize cleaning effectiveness.
    The Power Switch controls power to the machine; both
    switches must be ON for SmartTemp to work.
    The SmartTemp Switch is found on the back of the handle
    next to the Power Switch. You may choose not to use the
    SmartTemp feature if you are cleaning delicate wool or 
    oriental rugs.
    *SmartTemp heats the cleaning solution for carpet
    and bare floor application only. It does not heat
    solution sprayed through the accessory tools.
    The SmartTemp Ready Light indicates when the heater 
    is ON. The heater should be turned on two minutes before
    cleaning, to become fully warmed up and ready to clean.
    The Smart Temp Ready Light is found on the front of the
    handle where itis easy to see while you clean
    SmartTemp increases the water temperature 25° and will
    not allow it to exceed 180°.
    Provides custom control for each cleaning job.
    Lift the SmartMix concentrate bottle up and out of the
    machine base.
    Turn the bottle over so that the valve cap is in an upward
    position. Unscrew the valve cap and fill the bottle to the
    mark with BISSELL Deep Cleaning Formula.
    Replace the valve cap turning until snug.
    SmartTemp®
    1.
    2.
    3.
    4.
    SmartMix 
    bottle
    SmartMix®
    1.
    2.
    3.
    ONOFF
    Power Switch
    SmartTemp
    Switch
    ONOFF
    SmartTemp Ready Light 
    						
    							7
    SmartMix Continued
    Replace SmartMix concentrate bottle.
    Note: If bottle leaks, check for proper 
    positioning of o-ring and straw.
    Choose the SmartMix setting that fits the cleaning job.
    Water Rinse - use for gentle cleaning or for the
    final rinse after cleaning.
    Normal- automatically provides the best mix of
    water and concentrate for most cleaning jobs.
    High Traffic- automatically mixes the right amount
    of water and concentrate to dissolve tough grime
    and heavy soil. Note: Residual cleaning materials left
    in carpet from other products may cause excessive
    foaming when picked up. If foam is overflowing
    tank, move SmartMix dial to “Water Only” position
    until the condition stops.
    Note: Both the SmartMix Bottle and the clean
    water tank must have liquid in them 
    in order for the machine to spray. If 
    one tank is empty, the machine will 
    temporarily lose its prime and not apply
    either cleaning solution or water only.
    Important:
    If you are using the WATER RINSE
    setting, fill the Smart Mix bottle with
    water also!
    The pow-
    ered
    brush roll at the floor nozzle is designed to enhance cleaning
    performance. The bristle pattern lifts out the deep down dirt
    while gently grooming carpet fibers. The floating suspension
    self-adjusts to all carpet heights and protects your carpet if
    you leave the power switch ON. When the machine handle is
    in the fully upright position, CarpetSaver automatically raises
    the brush off the carpet.
    4.
    5.
    WARNING: To reduce the risk of
    injury, be extra careful
    when cleaning stairs.
    Make sure machine is
    secure and level.
    O-ring
    Position
    Tip:
    Deep Cleaning
    stairs and high
    traffic areas on 
    a regular basis
    can prolong 
    carpet life.
    SmartMix 
    Dial
    When filling bottle or 
    storing unit, set
                   
    dial to:  
    HIGH 
    TRAFFIC
    W
    ATER RINSE NORMAL 
    DirtLifter®PowerBrush
    WARNING: To reduce the risk of fire,
    use only BISSELL Deep
    Cleaning Formula in your
    ProHeat ClearView. Use of
    cleaning formulas which
    contain lemon or pine oil
    may damage this appli-
    ance and void warranty.
    Chemical spot cleaners or
    solvent based soil
    removers should not be
    used. These products may
    react with the plastic
    materials used in your
    ProHeat ClearView, causing
    cracking or pitting. 
    						
    							8
    Tank-in-Tank
    Our Tank-in-Tank system is designed with a Bladder inside for
    clean water. As you clean, the Bladder will empty. Dirty water
    collects in the tank outside the Bladder.
    Step on handle release to lay the machine handle 
    down out of the way.
    Lift the Tank-in-Tank handle. The handle locks the 
    lid in place.
    Carry it like a bucket to fill at the sink.
    Note: You may notice hair and debris deposits on
    the carpet that were loosened by the
    brushing action (especially with newer
    carpets that have never been deep cleaned
    before). This debris should be picked up
    and thrown away. Debris that deposits in
    the Brush Belt should be cleaned between
    uses to keep the Belts running free.
    Set the tank down and rotate the handle forward to unlatch
    the lid. Lift off and set the lid aside.
    Find the mouth of the Bladder and fill to the bottom of the
    neck with clean hot tap water.*Do not boil or microwave
    water as it can destroy the Bladder.
    Note: Fill the Bladder with clean hot tap water only.
    Replace the Tank Lid matching the lid and tank edges. Handle
    must be in the forward position to reinstall.
    Rotate the handle to the carrying position to re-latch 
    the lid.
    Replace tank in machine base, seating firmly in place.
    Rotate handle back down to the latched position.
    Note: Both the SmartMix Bottle and the clean
    water tank must have liquid in them in
    order for the machine to spray. If one tank
    is empty the machine will not apply either
    cleaning solution or water.
    Important: If you are using the WATER RINSE 
    setting, fill the SmartMix bottle with 
    water also!
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    Lift and Carry
    Fill Bladder only with
    clean hot tap water Rotate Handle to
    Unlatch
    Latched
    3
    4
    5
    9 
    						
    							9
    When It’s Time to Empty Tank-in-Tank
    1.
    2.
    3.
    4.
    5.
    6.
    7.
    8.
    9.
    Tip:
    Thorough 
    vacuuming 
    before deep
    cleaning will 
    prevent early 
    clogging of 
    lint trap.
    Tip:
    A special red
    float device 
    in the tank will
    cause the cleaner
    to stopremoving
    solution from the
    carpet and the
    motor sound will
    rise in pitch to let
    you know the
    dirty water tank is
    full.
    Remove the Tank-in-Tank – follow steps 1 and 2 
    on page 8.
    Carry the Tank-in-Tank, like a bucket, to the sink where you
    will dispose of the dirty water.
    Remove Tank Lid by rotating handle forward to unlatch lid and
    lifting lid off tank.
    Pour out dirty water.
    After each use, remove and rinse the lint screen located on
    the Tank Lid.
    A.Remove Tank Assembly from unit.
    B.Remove Tank Lid.
    C.Remove any debris caught in Lint Screen.
    D.Reinsert Lint Screen on Tank Lid. The screen will  click
    into place
    E.Replace Tank Lid.
    F.Reinsert Tank Assembly into unit.
    Refill with clean tap water as above, steps 5 through 9 on
    page 8, and refill the SmartMix bottle with BISSELL Deep
    Cleaning Formula as necessary.
    When the cleaning job is complete, rinse out the 
    Tank-in-Tank by rinsing clean water between the Bladder and
    tank.
    Return Tank-in-Tank to the machine, following steps 6 through
    9 (on page 8).
    Refer to the Maintenance section, page 18 for the 
    final cleanup.
    3
    5DRotate Handle to
    Unlatch
    Fill bladder
    only with clean
    hot tap water
    5CLint Screen
    Pour out
    dirty water4
    63
    Latched
    8 
    						
    							10
    The Flow Indicator
    This is located on the machine base. It spins when the trigger
    is pressed to indicate that the machine is applying cleaning
    solution to the floor. It will stop spinning to indicate that the
    SmartMix bottle or Bladder needs to be refilled, or when the
    trigger is released. Flow Indicator does not spin when set to
    Tool setting.
    This provides above floor cleaning with the flip of a switch. Just
    choose the cleaning tool, attach to the flex hose and ProHeat
    Clearview is ready to clean upholstery, stairs or more.*
    *Set the dial to Floor Cleaning when cleaning carpets
    or bare floors or set it to Tools/PreTreat when using
    the flex hose attachments or for pre-treating floors.
    *SmartTemp heats the cleaning solution for carpet
    and bare floor application only. It does not heat
    solution sprayed through the accessory tools.
    (Available on select models only)
    Unplug cleaner from outlet before attaching TurboBrush.
    Attach TurboBrush to the flex hose by pressing tool onto the
    grip/trigger until button snaps into hole. Make certain tool is
    securely in place.
    Move the TurboBrush switch to the “BRUSH” position.
    This activates the brush.
    Place the tool directly on the soiled surface. Apply downward
    pressure on the tool and pull towards you while pulling trigger
    to spray cleaning solution.
    Release the spray trigger and move the switch to the 
    “SUCTION” position. Vacuum the area until no more cleaning 
    solution can be removed.
    Repeat steps 1-3 until no more dirt can be removed.
    Caution: Do not overwet.
    ReadyTools Dial
    TurboBrush®
    1.
    2.
    3.
    4.
    Flow Indicator
    TO
    OLS
    PRE
    TREA
    T F
    LOO
    R
    CLEAN
    IN
    G
    Assembly
    Use
    BRUSH
    SUCTION
    ReadyTools
    Dial 
    						
    All Bissell manuals Comments (0)

    Related Manuals for Bissell 1699 N Manual