Bisell PROheat AllRounder 7700 User Manual

							USER’S GUIDE
7700 SERIES 220-240V
3
Safety Instructions
Product View
Assembly
Special Features
Operation
Maintenance and Care
Troubleshooting
Consumer Services
4-5
6
7-8
8-13
14-15
16
17
Replacement Parts
18-19
Warranty20
PROheat™ All-Rounder
ug120-4005_7700_607.indd   1ug120-4005_7700_607.indd   16/28/07   10:05:17 AM6/28/07   10:05:17 AM 
						

							2
Thanks for buying a BISSELL PROheat™ All-Rounder
 2www.bissell.com
We’re glad you purchased a BISSELL PROheat All-Rounder cleaning system. 
Everything we know about floor care went into the design and construction 
of this complete, high-tech home cleaning system.
Your PROheat All-Rounder is well made, and we back it with a limited 
two-year warranty. We also stand behind it with a knowledgeable, 
dedicated Consumer Services department, so, should you ever have a 
problem, you’ll receive fast, considerate assistance.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is 
a global leader in the design, manufacture, and service of high quality 
homecare products like your PROheat All-Rounder.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
President and Chief Executive Officer
ug120-4005_7700_607.indd   2ug120-4005_7700_607.indd   26/28/07   10:05:20 AM6/28/07   10:05:20 AM 
						

							 3www.bissell.com
When using an electrical appliance, basic 
precautions should be observed, including 
the following: 
READ ALL INSTRUCTIONS 
BEFORE USING YOUR 
CLEANING SYSTEM. 
Always connect to a properly Earthed 
outlet. Unplug from outlet when not in 
use and before conducting 
maintenance or troubleshooting. 
     WARNING: To reduce the 
risk of fire, electric shock, or injury:
■
   Use indoors only
■
   Do not immerse
■
   Use only on surfaces moistened by 
cleaning process
■
   Do not leave machine when it is plugged in
■
   Do not service machine when it is plugged in
■
  If the supply cord is damaged, it must be replaced 
by the manufacturer or its service agent in order 
to avoid a hazard
■
   Do not use machine if it has been dropped, 
damaged, left outdoors or dropped into water
■
   Do not expose to rain, store indoors 
■
   Do not pull or carry by cord, use cord as a 
handle, close door on cord, pull cord around sharp 
corners or edges, run appliance over cord, or 
expose cord to heated surfaces
■
   Do not carry the appliance while in use
■
   Do not unplug by pulling on cord; unplug by 
grasping plug not the cord
■
   Do not handle plug or appliance with wet hands
■
   Do not put any object into appliance openings, use 
with blocked opening or restrict air flow
■
   Do not expose hair, loose clothing, fingers or body 
parts to openings or moving parts
■
   Do not pick up hot or burning objects
■
   Do not pick up flammable or combustible 
materials (lighter fluid, petrol, kerosene, etc.) or use 
in the presence of explosive liquids or vapours
■
   Do not use appliance in an enclosed space filled with 
vapours given off by oil base paint, paint 
thinner, some moth proofing substances, 
flammable dust, or other explosive or toxic vapours■
   Remove plug from electrical outlet before cleaning 
or maintaining the appliance
■
   Not intended for use by young children or infirm 
persons without supervision
■
   Young children should be supervised to ensure 
that they do not play with the appliance
■
   Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, petrol, etc.)
■
   Do not modify the Earthed plug
■
   Do not allow to be used as a toy
■
   Do not use for any purpose other than described 
in this User’s Guide
■
   Use only manufacturer’s recommended 
 attachments
■
   Use only cleaning products formulated by 
BISSELL for use in this appliance to prevent 
internal component damage
■
   Keep openings free of dust, lint, hair, etc.
■
   Keep appliance on a level surface
■
   Turn off all controls before unplugging
■
   Be extra careful when cleaning stairs
■
   Pay close attention when working 
around children
SAVE THESE 
INSTRUCTIONS.
THIS MODEL IS FOR HOUSEHOLD USE ONLY. 
WARNING: This appliance must 
be Earthed.
IMPORTANT FOR OPERATION ON 
A 220-240 VOLT A.C. 50/60 Hz POWER 
SUPPLY ONLY. 
If your appliance is fitted with a nonrewireable 
BS 1363 plug it must not be used unless a 13 
amp (ASTA approved to BS 1362) fuse is fitted in 
the carrier contained in the plug. Spares may be 
obtained from your BISSELL supplier. If for any 
reason the plug is cut off, it must be disposed 
of, as it is an electric shock hazard should it be 
inserted into a 13 amp socket.
IMPORTANT SAFETY INSTRUCTIONS
ug120-4005_7700_607.indd   3ug120-4005_7700_607.indd   36/28/07   10:05:20 AM6/28/07   10:05:20 AM 
						

							 4www.bissell.com
Optional Accessories:
Air Powered Floor 
TurboBrushMulti-Surface Floor Tool5” Brush Crevice Tool- (works 
for wet cleaning too) Upholstery Dusting Brush
Grip
Some or all of these may have come with your unit. These items are available for purchase. To order replacement parts, additional tools or formulas, 
please refer to page 17-18.
Product view - water  ltrated vacuum mode
4” Upholstery ToolQuick Dry Hard Floor 
Tool (Shown with 
Microfibre Pad)Drain Cleaner
Wand
Air Powered Floor TurboBrush Hose Solution Line Collection Tank Handle
Extra Long 
Power Cord
Carry Handle
Quick Release™ Hose Door
Carpet Deep 
 Cleaning Tool
Top Lid
Collection Tank
ug120-4005_7700_607.indd   4ug120-4005_7700_607.indd   46/28/07   10:05:21 AM6/28/07   10:05:21 AM 
						

							 5www.bissell.com
Product view - wet cleaning mode
BISSELL Formulas:
Keep plenty of genuine BISSELL 
deep cleaning formulas on hand 
so you can clean whenever it 
fits your schedule. Always use 
genuine BISSELL deep cleaning 
formulas. Non-BISSELL cleaning 
solutions may harm the machine 
and void the warranty.
These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 17-18.
1.42 L 
Fibre Cleansing Formula™ with 
Scotchgard™ 
protector
1.42 L 
Multi- Allergen 
Removal
™ Formula™ 
with Scotchgard™ 
protector
1.42 L 
Pet Odor and Soil 
Removal
™ Formula 
with Scotchgard™ 
protector
1.42 L 
Natural Orange 
Extract Formula 
with 
Scotchgard
™ 
protector
1.42 L  
Lavender Essence 
Formula 
with 
Scotchgard
™ 
protector
.95 L. 
Hard Floor 
Solutions
™
Formula
Solution Tank
Deep Cleaning Floor Nozzle
ug120-4005_7700_607.indd   5ug120-4005_7700_607.indd   56/28/07   10:05:28 AM6/28/07   10:05:28 AM 
						

							This user’s guide has been designed to help you 
get the utmost satisfaction from your BISSELL 
PROheat All-Rounder. You’ll find assembly and 
operating instructions, safety precautions, 
as well as maintenance and troubleshooting 
instructions. Please read this users guide 
thoroughly before assembling your product. 
Pay particular attention to the product diagram, 
assembly instructions, and part names. Locate 
and organize all parts before assembly. Familiarize 
yourself with the parts and where they go. 
Following this user’s guide will greatly enhance 
your ability to get the most performance from your 
BISSELL PROheat All-Rounder for many years.
Your PROheat All-Rounder is easy to assemble and 
requires no tools: 
1. Attach hose to Quick Release™ Hose Door 
by inserting fitted end and turning clockwise 
until you hear it click into the locked position. 
2. Attach hose solution line to unit by inserting 
fitted end into the machine. Turn clockwise 
until it snaps into place.  
3. Snap the two wand pieces together by 
lining up tabs with holes and clicking 
together. Be sure that the wand piece with 
the adaptor (see figure 4a) is the one you will 
attach to the  tool to. Attached assembled 
wand to grip using the same technique.
4. Snap the desired tool on the end of the wand. 
Place wand adaptor into the wand caddy on 
the side of the unit.
5. Place either tool caddy or solution tank (if 
wet clean mode is desired) onto the back of 
the machine.
How to use this guide 
 6www.bissell.com
Assembly
 WARNING: 
Do not plug in your 
cleaner until you have 
completely assembled it per 
the following instructions 
and are familiar with all 
instructions and operating 
procedures.
Wand Adaptor
1 2 
3 4 
4a
Wand Caddy
5 
ug120-4005_7700_607.indd   6ug120-4005_7700_607.indd   66/28/07   10:05:39 AM6/28/07   10:05:39 AM 
						

							Your BISSELL PROheat All-Rounder is a 
complete home cleaning system. Not only does 
it come with a lot of unique features, it has been 
designed with you, the customer, in mind.  
Built-in heater
PROheat All-Rounder models all feature a patented 
built-in heater which heats the hot tap water 
you put in it up to 25 degrees hotter to safely 
optimize cleaning effectiveness. The heater will 
never allow the cleaning solution temperature 
to exceed 190 degrees. The heater switch on the 
back of the machine controls the heater so you 
have the option to turn off the heat if you want to.
Quick dry hard floor tool
BISSELL’s unique hard floor tool uses a combination 
of gentle scrubbing action and strong suction to 
clean your hard floor surfaces and leave them dry  
within minutes.  
Hard floor Microfibre pad
Soft and gentle microfibre pad is washable and 
re-usable, time and time again.
Tool caddy
The onboard tool caddy can be used to store any 
tools you are not currently using. 
Cleaning tools
Your PROheat All-Rounder comes with a variety of 
advanced tools, each one just right for a specific 
job. Some of these tools have multiple uses.
Air powered floor TurboBrush: 
Perfect for carpets and rugs, this air-powered 
floor TurboBrush comes with an air flow 
adjustor. When using on normal length carpets 
and rugs set the selector to Low. For especially 
thick or long carpet or rugs, switch the selector 
to High. Additional airflow will be brought in 
from the top of the brush in the High position.
Special features of your BISSELL PROheat All-Rounder
 7www.bissell.com 800.237.7691
SelectorBottom View
Top View
Microfibre Pad
ug120-4005_7700_607.indd   7ug120-4005_7700_607.indd   76/28/07   10:05:44 AM6/28/07   10:05:44 AM 
						

							Special features of your BISSELL PROheat All-Rounder
Cleaning tools (continued)
Multi-surface floor tool: 
May be used on both carpet/rugs or hard floor 
surfaces. For use on carpets, make sure the tab 
is in the down position               . This will hide 
the soft outer brushes. For hard floor surfaces, 
press the opposite tab in the down position
              . This will engage the soft outer brushes. 
Crevice tool: May be used for both dry 
vacuuming or wet cleaning. 
NOTE: In wet cleaning mode the crevice tool 
will spray water and cleaning solution. Take 
care not to press the trigger when in water 
filtrated vacuum mode.  
Quick Release™ Hose Door™
The handy Quick Release™ Hose Door ensures 
that the machine’s hose never rests on your 
carpet or hard floors, keeping them clean and 
dry while filling or emptying the tanks. 
Wand caddy
Perfect for storage or when you take a break 
from cleaning, the wand caddy holds the grip, 
wands and tools firmly in place
Vacuuming
Getting Ready
Reminder: In order to maximize the cleaning and 
filtration power of the PROheat All-Rounder and 
avoid damaging the machine, make sure there is 
always water in the collection tank. Be sure to fill 
up to the fill line with clean tap water
1. If desired, make sure the tool caddy is in the back 
of the machine. Store appropriate vacuuming 
tools as needed.
2. Attach desired tool to end of wand (or 
directly to grip).
 8www.bissell.com
Operation
ug120-4005_7700_607.indd   8ug120-4005_7700_607.indd   86/28/07   10:05:46 AM6/28/07   10:05:46 AM 
						

							Getting Ready (continued)
3. Remove the collection tank from the unit by 
opening the Quick Release Hose Door and 
lifting the tank straight up by the handle.
4. Remove the top lid from the collection tank 
and set aside.
5. Fill the collection tank to the fill line (located 
on side of tank) with clean, cold water.
6. Replace the top lid back onto the top of the 
collection tank
7. Set the collection tank back in the machine 
8. Select WATER FILTER VACUUM with the 
mode selector. 
9. Close the Quick Release Hose Door tightly 
until it clicks into the locked position.
10. Plug into a proper outlet and press the ON/
OFF button down into the ON position.
Emptying the tank
1. Open the Quick Release™ Hose Door and 
remove the collection tank by lifting straight 
up with the tank handle.
2. Remove the top lid from the collection tank 
and set it aside.
3. Empty dirty water into a sink or toilet, or 
outside. Pour the dirty water out from the cor-
ner of the tank. Rinse out the tank thoroughly.
4. Refill the tank if needed and replace the top lid 
back onto the top of the collection tank. 
5. Set the collection tank back in the machine.
6. Close Quick Release hose door tightly until it 
clicks into locked position.
7. If finished vacuuming, refer to the Maintenance 
and care section starting on page 14. 
Wet cleaning
Before you clean
1.  Plan activities to give your carpets time to dry.
2.  Thoroughly dry vacuum the area to be cleaned.
3.  Plan your cleaning route to leave an exit 
path. It is best to begin cleaning in the 
corner farthest from your exit.
Operation
9
www.bissell.com
34
56
78
ug120-4005_7700_607.indd   9ug120-4005_7700_607.indd   96/28/07   10:05:48 AM6/28/07   10:05:48 AM 
						

							 10www.bissell.com
Getting ready to wet clean
NOTE: Remove tool caddy if in place.
1.  Attach the desired wet cleaning tool to end 
of wand or grip.
2.  Open the Quick Release™ Hose Door and 
select “WET CLEAN” with the mode selector.
3.  Place the clean solution tank on a 
flat surface.
4.  Fill the solution tank by first unscrewing the 
measuring cap. Always use genuine BISSELL 
formulas to maximize cleaning and for the 
safety of your machine. Fill tank to fill line with 
hot tap water. Add two full measuring caps of 
formula. Screw measuring cap tightly back 
onto the solution tank.  
5.  Place the solution tank back in 
the machine.
6.  Plug into a proper outlet and press the ON/
OFF, wet clean and heater (if desired) buttons 
down into the ON position.
Note: Allow one minute for the built-in 
heater to warm up before cleaning. The 
PROheat All-Rounder will be fully warmed 
and will provide optimal performance after 
one minute of continuous heated cleaning.
Carpet Cleaning
1.  Attach carpet deep cleaning tool to end of wand.
2.  Place carpet deep cleaning tool directly on 
carpet. Pull the spray trigger to spray cleaning 
solution while pulling the wand towards you.
3.  Keeping nozzle of the carpet deep cleaning tool 
firmly against the carpet surface, continue to 
make slow forward and backward wet passes 
until no more dirt can be removed. 
Do not overwet      .
4.  Release spray trigger and make slow forward 
and backward passes over the same area to 
remove any residual dirty water.
5.  Repeat wet cleaning passes until water 
being pulled up appears clean.
6.  Continue passes without pressing the spray 
trigger until you cant see any more water 
being pulled up.
Operation
Tip:
Move furniture to another area 
if cleaning an entire room.
24a
4b 4c
5 4d
ATTENTION: Some Berber carpets have a 
tendency to fuzz with wear. 
Repeated strokes in the same 
area with an ordinary vacuum 
or deep cleaner may aggravate 
this condition. 
ug120-4005_7700_607.indd   10ug120-4005_7700_607.indd   106/28/07   10:05:52 AM6/28/07   10:05:52 AM