Bisell PROheat 2 7901J User Manual

Features / Operations
ProHeat™
 II
USER’S GUIDE
7901 SERIES - 220 / 240V
Safety Instructions3
Product View/Accessories4
Assembly5
6-15
Routine Maintenance15-17
Troubleshooting18
Warranty 20
Replacement Parts19
Consumer Services 19 

  Thanks for buying a BISSELL ProHeat™
 II
We’re glad you purchased a BISSELL ProHeat II heated formula deep 
cleaner. Everything we know about floor care went into the design and 
construction of this complete, high-tech home cleaning system.
Your ProHeat II is well made, and we back it with a limited 
two-year warranty. We also stand behind it with a knowledgeable, 
dedicated Consumer Services department, so, should you ever have a 
problem, you’ll receive fast, considerate assistance.
My...

3
  IMPORTANT SAFETY INSTRUCTIONS
■   Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, petrol, etc.)
■   Do not modify the 3-pin Earthed plug
■   Do not allow to be used as a toy
■   Do not use for any purpose other than 
described in this User’s Guide
■   Use only manufacturer’s recommended 
attachments
■   Use only cleaning products formulated by 
BISSELL for use in this appliance
■   Keep openings free of dust, lint, hair, etc.
■   Keep appliance on a level surface
■   Turn off...

4
SmartMix™ 
Bottle
DirtLifter™
PowerBrush
Floor Nozzle Window
SmartTemp™ 
Ready Light
ReadyTools™ 
Dial Lower Handle
Belt Access Door
Flow Indicator
(Filter Inside)SmartMix™
Switch
Flex Hose
Power Cord 
Quick Release
Tool Caddy
Tank-in-
Tank™
Power 
Switch
Trigger
Upper
Handle
4’Upholstery Storage
Handle 
Release
Hex 
Nuts
Belt
Storage
Crevice Tool
Storage
1.
2.
3.
4.
5.
* All items may not be included with your model. 
More tools are available. To order replacement parts or tools 
please refer to page...

 5
   How To Put It Together
   How To Use This Guide
This User’s Guide has been designed to help you get the utmost 
satisfaction from your BISSELL ProHeat II. You’ll find assembly and 
operating instructions, safety precautions, as well as maintenance 
and troubleshooting instructions. Please read this User’s Guide 
thoroughly before assembling your deep cleaner. 
Pay particular attention to the product diagram, assembly 
instructions, and part names. Locate and organize all parts before 
assembly....

 6
Special Features of your BISSELL ProHeat™
 II
The ProHeat II is a home cleaning system that automatically mixes 
hand hot tap water with BISSELL Advanced Deep Cleaning Formula 
and heats the solution as it is applied to the carpet. The combination 
of heated cleaning solution, powered brush and suction provide a 
safe and effective method of cleaning.
Temperature control automatically heats the cleaning solution 
as it is being applied to the carpet (*) to safely optimize 
cleaning effectiveness.
The...

 7
SmartMix™
 Continued
Replace SmartMix Bottle. 
Choose the SmartMix setting that fits the cleaning job.
Water Rinse- use for gentle cleaning or for the 
final rinse after cleaning. 
Normal- automatically provides the best mix of 
water and cleaning solution for most cleaning jobs.
High Traffic- automatically mixes the right amount 
of water and cleaning solution to dissolve tough 
grime and heavy soil. Note: Residual cleaning 
materials left in carpet from other products may 
cause excessive foaming...

 8
Tank-in-Tank 
Our Tank-in-Tank system is designed with a Bladder inside for 
clean water. As you clean, the Bladder will empty. Dirty water 
collects in the tank outside the Bladder.
Step on Handle Release to lay the machine handle 
down out of the way.
Lift the Tank-in-Tank handle. The handle locks the 
lid in place.
Carry it like a bucket to fill at the sink.
Note: You may notice hair and debris deposits 
on the carpet that were loosened by the 
brushing action (especially with newer 
carpets that...

Remove Tank Lid by rotating handle forward to unlatch 
lid and lifting lid off Tank.
Pour out dirty water.
After each use, remove and rinse the Lint Screen located 
on the tank lid.
A. Remove Tank Assembly from unit.
B. Remove Tank Lid.
C.  Remove any debris caught in Lint Screen. 
D.  Re-insert Lint Screen on Tank Lid. The screen will 
click into place
E. Replace Tank Lid.
F.  Re-insert Tank Assembly into unit.
Refill with clean hand hot tap water, following steps 5 
through 9 on page 8, and refill the...

Unplug cleaner from the outlet before attaching TurboBrush. Attach 
TurboBrush to the Flex Hose by pressing tool onto the grip/trigger 
until button snaps into hole. Make certain tool is securely in place.
Move the TurboBrush switch to the “BRUSH” position.
This activates the brush when the unit is running.
Place the tool directly on the soiled surface. Apply 
downward pressure on the tool and pull towards you 
while pulling trigger to spray cleaning solution.
Release the spray trigger and move the...