Bisell PowerForce Bagless 75Q1E User Manual

							U S E R ’ S   G U I D E75Q1 SERIES 220-240V
3Safety Instructions
4Product View
5Assembly
6-7
Operation 
8-12 Maintenance and Care
12-13 Troubleshooting
14Technical Queries
15 Replacement Parts
PowerForce™
B A G L E S S 
						

							2
Thank you for buying a BISSELL PowerForce™ Bagless Vacuum 
 2
We’re glad you purchased a BISSELL PowerForce Bagless Vacuum. Everything 
we know about floor care went into the design and construction of this 
powerful, high-tech home vacuuming system.
My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a 
global leader in the design, manufacture, and service of high quality homecare 
products like your BISSELL PowerForce Bagless.
Thanks again, from all of us at BISSELL.
Mark J. Bissell
Chairman, President & CEO
          
						

							 3
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, 
basic precautions should be observed,   
including the following:
READ  All InSTRUCTIOnS 
bEfORE  USInG yOUR  
UPRIGHT VACUUM. 
WAR nIn G: To reduce 
the risk of fire, electric shock,   
or injury:
 
■ Use indoors only.
■  Do not leave machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped into water, 
return it to a service agent.
■ Do not handle unit with wet hands.
■ Do not pull or carry by cord, use cord as a handle, close 
door on cord, pull cord around sharp corners or edges, 
run appliance over cord, or expose cord to heated sur -
faces.
■  Do not unplug by pulling on cord.  Unplug by 
grasping plug.
■  Do not run appliance over cord.
■ Do not handle plug or appliance with wet hands.
■ Do not expose hair, loose clothing, fingers or body 
parts to openings or moving parts.
■ Do not pick up hot or burning objects such as 
cigarettes, matches, or hot ashes.
■ Do not pick up flammable or combustible materials (lighter 
fluid, petrol, kerosene, etc.) or use in the   
presence of explosive liquids or vapour.
■  Do not use appliance in an enclosed space filled with 
vapours given off by oil base paint, paint   
thinner, some moth proofing substances, flammable dust, 
or other explosive or toxic vapours.
■  Not intended for use by persons (including 
children) with reduced physical, sensory or mental   
capabilities, or lack of experience and knowledge, 
unless they have been given supervision or instruction 
concerning use of the appliance by a person   
responsible for their safety
■  Young children should be supervised to ensure that they do 
not play with the appliance.
■  Remove plug from electrical outlet before cleaning or 
maintaining the appliance.
■ If the supply cord is damaged, it must be replaced by 
the manufacturer or its service agent in order to avoid a 
hazard.
■ Do not pick up toxic material (chlorine bleach, 
ammonia, drain cleaner, petrol, etc.).
■ Do not allow to be used as a toy.
■ Do not use for any purpose other than described in 
this User’s Guide.
■ Use only manufacturer’s recommended attachments.
■ Do not use with any opening blocked; keep free of 
dust, lint, hair, and anything that may reduce air flow.
■ Keep appliance on a level surface.
■ Turn off all controls before unplugging.
■ Be extra careful when cleaning stairs.
■ This appliance is provided with double 
insulation. Use only identical replacement parts.
■ Do not use without debris tank and/or filters in place.
■ Pay close attention when working 
around children.
SAVE THESE 
I n STRUCTIO nS.
ThIs moDel  Is foR hoUseholD  Use oNlY.
IMPORTA nT foR  oPeRATIoN  oN A 220-240 Vol T A.C. 50/60 hz 
PoWeR  sUPPlY oNl Y. 
fOR RESIDEnTS Of THE   
UnITED KInGDOM Only
If your appliance is fitted with a nonrewireable B s 1363 
plug it must not be used unless a 13 amp (A sTA approved 
to B s 1362) fuse is fitted in the carrier contained in the 
plug. ( spares may be obtained from your BI ssell  
supplier). If for any reason the plug is cut off, it must be 
disposed of, as it is an electric shock hazard should it be 
inserted into a mains socket.  
						

							for any technical queries, please contact  
our Technical Helpline at 0845 300 7775
 4
CAUTIOn: Do not  plug in your 
vacuum cleaner  until 
you  are familiar  with 
all  instructions  and 
operating  procedures.
Carrying
Handle
Furniture Protection 
Guard
Height 
Adjustment 
Knob
Power SwitchCrevice Tool
Quick Reach
™ 
Handle
Handle 
Release   
Pedal Stretch Hose 
Extension Wand
Combination 
Dusting 
Brush/ 
Upholstery 
ToolTwist 'n 
Snap
™ 
Hose 
Connector
Hose Wand
Hose 
Wand Base
Foot Hose Dirt Container
Inner and Outer 
Circular Filters
Product view
Hose Clip
Cord Clip
Quick Release™ 
Cord Wrap
Powerfoot Power Cord
Upper Tank Primary Separator
Handle
Post-Motor 
Filter
Pre-Motor 
Filter
Lock ’n Seal
™ 
Lever
Filter Cup 
						

							for any technical queries, please contact  
our Technical Helpline at 0845 300 7775
 5
How to use this guide
Assembly
This User’s Guide has been designed to help 
you get the most satisfaction from your  bISSE ll 
Power force  bagless.  you’ll find assembly and 
operating instructions, safety precautions, as well 
as maintenance and troubleshooting instructions. 
Please read this User's Guide thoroughly before   
assembling your vacuum cleaner. 
Pay particular attention to the product diagram, 
assembly instructions, and part names.  locate 
and organize all parts before assembly.  following 
this User’s Guide will greatly enhance your ability 
to get the most performance from your  bISSE ll 
Power force  bagless for many years.
The only tool you’ll need to assemble your   
vacuum cleaner is a screwdriver.
Attach handle to vacuum
1.  Locate the vacuum handle and remove the 
screw packet taped to the base of the handle.
2.  Stand the vacuum upright and place the handle 
on the top of the vacuum body.
3.  Insert the screws into the existing holes on 
each side. Tighten securely with a screwdriver.
Attach vacuum hose and tools
1. Attach the Twist ‘n Snap™ hose by lining up 
the tabs on the base with the corresponding 
notches on the back of the vacuum as shown.
2.  Turn the Twist ‘n Snap hose to the right to lock 
the hose into place.
3.  Grasping the Quick Reach™ handle, slide the 
end of the hose wand onto the hose wand 
base. Snap the hose into the hose clip.
nOTE: The powerfoot will not operate   
effectively unless the hose wand is   
firmly attached.  
4.  Slide the extension wand and the crevice tool 
together into the storage clip on the side of 
the vacuum.
5.  Snap the combination tool into the storage clip 
on the back of the vacuum.
WARnInG: Plastic film can be 
dangerous.  To avoid 
danger of suffocation , 
keep away from 
babies  and children. 
						

							for any technical queries, please contact  
our Technical Helpline at 0845 300 7775
16
Handle position
Press the handle release pedal with your foot to 
place your  bISSE ll Power force  bagless into one 
of three cleaning positions.
1.  Upright- For storage and above floor 
cleaning with special tools.
2.  normal Cleaning- Press handle release 
pedal once. Use for most household floor 
cleaning tasks.
3.  low Cleaning-  With the vacuum in normal 
cleaning position press handle release pedal 
again. Use for reaching under low furniture 
such as tables, chairs and beds.
Powerfoot height adjustment
The powerfoot/rotating floor brush on your  bISSE ll 
Power force  bagless can be adjusted to clean   
several floor surfaces. 
nOTE:  for optimal cleaning performance, 
adjust to the lowest practical setting. If 
your cleaner is difficult to push, adjust to 
the next higher setting. 
1.  Place handle in upright position. 
2.  Turn height adjustment knob to desired setting.
lowest Setting -   For bare floors.
Medium Settings - For short and medium 
  pile carpets.
  Highest Setting -   For plush pile carpets.
3.  Place the handle into the normal cleaning 
position and the powerfoot will adjust to the 
setting chosen.
nOTE:  you may also adjust the setting while 
in the normal cleaning position. 
Transporting cleaner
1.  To move your cleaner from room to room, 
put the handle in the upright position, tilt the 
cleaner back on its rear wheels and push 
forward. 
2.  The cleaner can also be moved by using the 
carrying handle on the back.
Operation
 6
CAUTIOn: before using your vacuum, 
make sure that the dirt container 
is in locked position and that all 
filters ( inner circular, outer circular , 
pre-motor and post-motor) are 
in place. Do not operate your 
vacuum without these filters.
Tip:
Your vacuum features 
a Quick Release cord 
wrap. To remove the 
power cord quickly 
and easily, rotate 
the upper cord wrap 
towards the floor, and 
slip power cord from 
upper and lower   
cord wraps.
Tip:
Before cleaning under 
low furniture, check 
area first for objects 
that might harm the 
unit or block the 
vacuum hose.
Carrying Handle
1
2
3
ATTEnTIOn: Some berber carpets have a tendency to fuzz 
with wear. Repeated strokes in the same 
area may aggravate this condition. Consider 
setting your cleaner on a higher than normal 
setting for this type of carpet. 
						

							for any technical queries, please contact  
our Technical Helpline at 0845 300 7775
 7
Special tools
y our  bISSE ll Power force  bagless is not only a 
powerful carpet and rug vacuum cleaner, it’s also 
a versatile above floor vacuum cleaner when you 
select one of the special tools.
1.  Raise handle to upright position.
2.  Grasp Quick Reach handle and lift hose wand 
to separate from suction intake opening.
3.  Attach tools by firmly pushing onto vacuum 
hose or extension wand.
  Combination Dusting  brush/Upholstery 
Tool: Two types of cleaning tools are included 
in one attachment; rotate for desired tool.
■ Use brush side to dust furniture, blinds, books, 
lamps, shelves, and baseboards.
■ Use upholstery side for curtains, draperies, cushions and fabrics.
Crevice Tool:
Use in tight, narrow spaces.
Extension Wand:
Use with desired attachment for a longer reach.
Power cord
When you are done using your  bISSE ll 
Power force  bagless, return it to the upright   
position and store the power cord.
1.  Turn power switch OFF.
2.  Unplug power cord by grasping the plug (NOT 
the cord) and disconnect from outlet.
3.  Loop power cord around cord wraps on side 
of vacuum cleaner.
4.  Clip molded plug to power cord to secure.
Operation
nOTICE: The floor brush will continue to rotate 
while you use your vacuum for above 
floor cleaning. To prevent carpet   
damage, do not lean on the vacuum   
or let the powerfoot tilt forward.
 CAUTIOn: The rotating floor brush   
continues to rotate  while 
tools are in use. To reduce 
the risk of injury from   
moving parts, always move 
the cleaner with the   
carrying handle at the back 
of the cleaner. Always place   
the vacuum cleaner on the 
floor with the handle in 
upright position when   
using tools.  never place 
your fingers under the 
cleaner when it is running. 
never place powerfoot   
on furniture or uneven   
surfaces. Do not place   
vacuum cleaner close 
enough to objects to pull 
them into rotating brush.
Tip:
Hair, string and small 
objects can block the 
vacuum hose or   
tools. Check them 
occasionally for 
obstructions.
nOTICE: While vacuuming, certain carpets 
and low humidity conditions may 
generate small static discharges. 
The  discharges  are entirely 
harmless and are not associated 
in any way with the main   
power supply. 
						

							for any technical queries, please contact  
our Technical Helpline at 0845 300 7775
 8
Maintenance and care
To maintain maximum cleaning performance 
from your  bISSE ll Power force  bagless, perform 
these simple maintenance steps.
1.  Empty the dirt container when the dirt 
reaches the “Full” line on the side. 
2.  Check the inner and outer circular filters, 
and the pre-motor filter at least once a 
month and clean or replace as needed.
3.  Clean or replace the post-motor filter every 
three to six months.
note: More frequent filter cleaning or 
replacing may be necessary if you are   
vacuuming new carpet, fine dust, or have 
allergy concerns.  follow the instructions on 
the following pages to perform these simple 
maintenance steps.
Emptying dirt container 
The dirt container needs to be emptied when 
the dirt reaches the “ full” line on the side of the 
container.
1.  Unplug cleaner from electrical outlet.
2.  Slide the Lock ‘n Seal lever to the "Unlock" 
position.
3.  Grasp handle and pull the dirt container 
straight out to remove from vacuum.
4.  Empty dirt into garbage container.
5.  Put the dirt container back in the vacuum 
and slide the lever to the "Lock" position.
note: The dirt container may be washed in 
warm water with a mild detergent. Remove 
the filter cup from the bottom before   
washing. Make sure it is completely dry 
before reassembling with the filter cup.
WAR nIn G: 
To reduce the risk of 
electric shock, turn   
power switch Off and 
disconnect plug from 
electrical outlet before 
performing maintenance 
or troubleshooting 
checks.
Tip:
For maximum cleaning 
performance, check 
and clean or replace all 
filters as suggested.
Lock Position
Full Line
Unlock 
Position 
						

							for any technical queries, please contact  
our Technical Helpline at 0845 300 7775
16
Cleaning the inner & outer circular filters 
Use only  bISSE ll Style 10 replacement filters in 
your  bISSE ll Power force  bagless.
1.  Unplug cleaner from electrical outlet.
2.  Remove the dirt container as described in 
the previous section. Grasp the filter cup 
located at the bottom of the dirt container 
and twist counterclockwise to unlock and 
remove.
3.  Grasp the circular filters and pull straight up 
to remove.
4.  Separate the outer foam and inner pleated 
circular filters. Wash each individually by 
hand in warm water. Mild detergent may be 
used if desired. Rinse well, then air dry   
thoroughly before putting them back   
together and replacing in filter cup.
5.  The filter cup may be washed in warm water 
with a mild detergent. Make sure it is completely 
dry before reassembling with filters.
6.  The upper tank and primary separator may 
be wiped clean with a damp cloth. Reach 
underneath the upper tank and turn the 
rim of the primary separator to unlock. Pull 
straight down to remove.
Cleaning the pre-motor filter 
1. Unplug cleaner from electrical outlet.
2.  The pre-motor filter protects the motor from 
debris. It is located underneath the dirt 
container and filter cup in the center of the 
round part of the Lock ‘n Seal lever.
3.  Remove the small, round, pre-motor filter and 
any debris on top of it. Rinse well under warm 
water, then air dry thoroughly before replacing.
Maintenance and care
 9
WARnInG: Do not operate cleaner   
with damp or wet   
filters or without all   
filters in place.
Pre-Motor 
Filter
 nOTICE: This product is intended for household 
use only and not for commercial or 
industrial use.  Vacuuming of dust 
from products like plaster, concrete or 
ashes will damage the motor and void 
the warranty. 
						

							for any technical queries, please contact  
our Technical Helpline at 0845 300 7775
10
Maintenance and care
Cleaning post-motor filter 
Use only  bISSE ll Style 10 replacement filters in 
your  bISSE ll Power force  bagless.
1.  Unplug cleaner from electrical outlet.
2.  The post-motor filter assists in the filtration 
process to return clean air to the room. It is 
located behind the door on the front of the 
cleaner. When the filter becomes dirty, open 
the door, remove the filter and clean.
3.  The post-motor filter may be hand washed 
in warm water. Mild detergent may be used 
if desired. Rinse well, then air dry thoroughly 
before replacing.
4.  Replace the door by inserting the tabs on the left 
side and snapping the right side into place.
Check rotating floor brush and drive belt
y ou should check your vacuum cleaner’s rotating 
floor brush and drive belt regularly for wear or   
damage.  you should also clean the brush and brush 
ends of string, hair and carpet fibers. These can wrap 
around the brush and hamper its ability to effectively 
clean your carpet.
 Also, remove any debris that has 
accumulated under the brush cover.
1.  Unplug cleaner from electrical outlet.
2.  Place handle in low position and turn vacuum 
cleaner over so bottom side is up.
3.  Remove the four screws from the brush cover (as 
shown) with a Phillips head screwdriver. Lift the 
brush cover off.
4.  Grasp rotating floor brush at both ends and lift.
5.  Clean strings, hair and other debris from 
rotating floor brush, paying particular attention 
to brush ends.
6.  Clean strings, hair and other debris from motor 
pulley and drive belt areas.
7.  Check drive belt carefully for wear, cuts or 
stressed areas. Replace if worn or damaged.
8.  Check air passageway for obstructions. Remove 
debris from this area. Post-Motor 
Filter
WARnInG: To reduce the risk of   
injury from moving parts, 
turn the power switch O ff  
and disconnect plug from 
electrical outlet.
Motor 
Pulley
Air Passageway
Brush 
Cover