Bisell Pet Hair Eraser Multi Cyclonic 25V1 User Manual

2Thank You
USER'S GUIDE
25V1 SERIES 220-240V
Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
TroubleshootingReplacement Parts3
4
5
6-8
8-13
13-14
14
Accessories
Warranty
Consumer Services14
15
16    

www.bissell.com 
Thanks for buying a BISSELL Pet Hair Eraser™ vacuum
We’re glad you purchased a BISSELL vacuum. Everything we 
know about floor care went into the design and construction 
of this complete, high-tech home cleaning system.
Your BISSELL vacuum is well made, and we back it with a lim-
ited one year warranty. We also stand behind it with a knowl-
edgeable, dedicated Consumer Services department, so, should 
you ever have a problem, you’ll receive fast, considerate assis-
tance.
My...

www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
 3
When using an electrical appliance, 
basic precautions should be observed, 
including the following: 
REAd ALL   
INSTRUCTIONS  
BEFORE USIN g YOUR  
UPRIgHT VACUUM. 
 
   WARNIN g: To  
reduce the risk of fire, 
electric shock, or injury:
 ■  Do not use outdoors or on wet surfaces.
■ Do not leave machine when it is plugged in.
■ Do not use with damaged cord or plug.
■ If appliance is not working as it should, has 
been dropped, damaged, left outdoors, or...

www.bissell.com 4
Product view
CAUTION:  Do not plug in your   
vacuum until you are familiar 
with all instructions and   
operating procedures.
Handle
Power Switch
Easy 
Empty™ Dirt 
Container
Headlight
Height Adjustment   
Knob
Wide Cleaning Foot
Foot   
Window
Washable   
Pre-Motor 
Filter
Carry 
Handle
Lock ‘n Seal™ Lever
HEPA Media  
Post Motor 
Filter*
Upper Tank Inner Cyclone
Power 
 
Cord
Crevice Tool
Dusting Brush/
Upholstery Tool
Twist ‘n Snap™   
Hose
Handle 
Release Pedal
Hose   
Wand
Hose...

1.
www.bissell.com 
Assembly 
The only tool you’ll need to assemble 
your vacuum cleaner is a Phillips 
screwdriver.
Attach handle to vacuum
1.  Locate the handle and cord wrap. Remove 
the screw packet taped to the handle.
2.  Stand the vacuum upright and from the 
rear of the unit, slide the base of the 
handle firmly into the grooves at the top 
of the vacuum body. 
3.  Ensure that the handle fits firmly to the vacuum 
body. If there are any gaps, continue to push 
firmly until the handle is secure....

www.bissell.com 
Operations
6
Power switch
The Power Switch is located on the left 
side of the vacuum. Push the rocker 
switch “ON” (I) to vacuum, and “OFF” 
(O) when cleaning is complete.
Handle positions
Press the handle release pedal, located 
on the lower left side of the vacuum, with 
your foot to place your vacuum into one 
of three cleaning positions. 
1. Upright – For storage and above floor  
cleaning with tools.
2.  Normal Cleaning – Press handle 
release pedal once. Position used for most...

www.bissell.com 7
Operations
Special on-board tools
Your vacuum is not only a powerful  
carpet and rug cleaner, it’s also a   
versatile above floor vacuum cleaner 
when you select one of the special tools.
1.  Raise the handle to the upright position.
2.  Grasp the hose wand handle to separate 
from hose wand base.
3.  Attach tools by firmly pushing onto vacu-
um hose, hose wand or extension wand. 
Be sure the hose and tool fit snuggly 
together by twisting tightly.
Dusting Brush/Upholstery Tool:...

www.bissell.com 
Operations
8
Power cord usage 
1. To use your vacuum, remove the cord 
and plug it into an electrical outlet. 
For your convenience, there is a quick 
release cord wrap for easy cord remov-
al. There is also a cord clip that is part 
of the upper cord wrap where you can 
attach the cord when vacuuming.
2.  When you are finished cleaning, turn  
vacuum cleaner off.
3.  Unplug power cord by grasping the plug 
(NOT the cord) and disconnect from outlet.
4.  Loop power cord around cord wraps...

www.bissell.com 9
Maintenance and care
Emptying the dirt container
The dirt container should to be emp-
tied before the dirt reaches the “Full” 
line on the container.
1. Unplug the vacuum from electrical out-
let.
2.  Slide the Lock ‘n Seal Lever to the 
“Unlock” position.
3.  Grasp handle and pull the dirt container 
straight out to remove from the vacuum.
4.  Empty dirt into garbage container. 
NOTE: Emptying the dirt container 
after every use will help prevent 
over filling and ensure that the...

www.bissell.com 
Maintenance and care
10
 
You should check your vacuum cleaner’s  
rotating floor brush and drive belt regu-
larly for wear or damage. You should also  
clean the brush and brush ends of strings,  
hair and carpet fibers. This type of debris  
can wrap around the brush and hamper  
its ability to effectively clean your carpet.  
Also remove any debris that has accumu-
lated under the brush cover.  
1. Unplug the vacuum from electrical outlet.
2.  Place handle in low position and turn...