Bisell Pet Hair Eraser 87R4E User Manual

USER’S GUIDE
87R4 SERIES 220-240V
3Safety Instructions
Product View
Assembly
Operations
Maintenance and Care
Troubleshooting
Consumer Services
Replacement Parts
4
4
4-5
5-6
6
7
7
Warranty8
Pet Hair Eraser™
CORDED HAND VACUUM
ug110-4076_87R4E_1008.indd   1ug110-4076_87R4E_1008.indd   112/10/08   3:31:18 PM12/10/08   3:31:18 PM 

2
Thanks for buying a BISSELL Vacuum 
 2www.bissell.com 
We’re glad you purchased a BISSELL Pet Hair Eraser corded hand vacuum. 
Everything we know about floor care went into the design and construction 
of this complete, high-tech home cleaning system.
Your BISSELL hand vacuum is well made, and we back it with a limited one 
year warranty. We also stand behind it with a knowledgeable, dedicated 
Consumer Services department, so, should you ever have a problem, you’ll 
receive fast, considerate...

 3www.bissell.com 
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, 
basic precautions should be observed, 
including the following:
READ ALL INSTRUCTIONS 
BEFORE USING YOUR 
UPRIGHT VACUUM. 
WARNING: To reduce 
the risk of fire, electric shock, 
or injury:
 
■ Do not use outdoors or on wet surfaces.
■  Do not leave machine when it is plugged in.
■  Do not use with damaged cord or plug.
■  If appliance is not working as it should, has been 
dropped, damaged, left outdoors, or dropped...

 4www.bissell.com 
Your unit will come assembled and will require 
no tools to put together.
Power switch
The power switch is located on the end of the curved 
handle.
To turn hand vacuum ON ( I ), press up.
To turn hand vacuum OFF ( 0 ), press down.
Cleaning with hard nozzle
1. Turn hand vacuum OFF.
2.  Remove flexible rubber contour nozzle by 
pressing down on round nozzle release 
button.
3.  Replace with hard nozzle by lining up the 
bottom of nozzle to the bottom of the dirt 
container.  Pivot...

 5www.bissell.com 
Cleaning with flexible rubber contour nozzle
1. Turn hand vacuum OFF.
2. Remove hard nozzle by pressing down on 
round nozzle release button.
3. Replace with flexible rubber contour nozzle by lining  
up the bottom of nozzle to the bottom of the dirt 
container. Pivot upwards until it snaps into place.  
4. Make sure the nozzle has snapped securely 
into place before using
Emptying the dirt container
Empty the dirt container after each use. A 
full dirt container may reduce suction or...

Cleaning the filter and screen continued
5. Separate filter assembly by grasping tabs on 
both sides of assembly and pull. For best results, 
periodically tap filter and screen against trash 
can to remove dirt that has collected.  
6. Reconnect filter and screen by aligning 
rectangular tab on filter with insert on screen. 
Press together to ensure assembly is secure. 
7. See page 5 to reattach dirt container. 
NOTE: The dirt container and screen may be 
rinsed with cold water. Ensure both are dry...

 7www.bissell.com 
BISSELL Consumer Services
Replacement parts - BISSELL vacuum
Item  Part No.  Part Name
1  203-1432    HEPA Media Filter Assembly
2  203-1408    Flexible Rubber Contour Nozzle
3 203-1409  Hard Nozzle
123
If your BISSELL product should require service:In the UK, Australia or New Zealand, call BISSELL Consumer Services at the numbers below and we will give 
you the location of a BISSELL Authorized Service Center in your area. For all other countries, contact your local 
in country...

16www.bissell.com8www.bissell.com
Warranty - BISSELL Pet Hair Eraser™ Corded Hand Vacuum
©2009 BISSELL Homecare, Inc
Grand Rapids, Michigan
All rights reserved. Printed in Korea
Part Number 110-4076
Rev 10/08
Visit our website at:
www.bissell.com
 This warranty gives you specific legal rights, and you may also have other rights which may vary from country 
to country. If you need additional instruction regarding this warranty or have questions regarding what it may 
cover, please contact BISSELL Consumer...